"14rca-qs204 kohler power systems"

Miniature Circuit Breaker, 1-Pole, 16 Amps, 480Y/277V AC. K-Curve. 10 kAIC. ST200M Series. Supplemental Protectors. UL 1077, CSA 22.2.

Category: 1-Pole DIN Rail Mount Circuit Breakers

Electric Floor Warming Cables for use with Uncoupling Membrane Systems. 189 FT, 57.5 Meters, 2.8 Amps, Power Consumption 679 Watts, Carton Weight 6.2 LBS, 2 Cartons per Case, Covers 47-56 SQFT at Standard Spacing, Covers 32-39 SQ FT at Dense Spacing

Category: 240V Floor Warming Cable Kits

Universal Network Zone System, 24" x 24", mild steel enclosure, for one industrial switch, includes (8) Cat 6 UTP copper patch cords and jacks, (2) MM LC fiber uplink patch cords with (6) adaptors and redundant power supplies, battery UPS, PoE

Www.littelfuse.com/%7e/media/products/misc_electrical_products_and_accessories/power_distribution_splicer_blocks/technical Resources/littelfuse_powrbloks_ld_ls_datasheet.pdf

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

Air Conditioner Extension Cord, SPT-3. Right Angle Plug, U-Ground, NEMA 5-15P, Size/Number of Conductors: 14/3. Rating: 15 Amp, 125V AC. 1875 Watt. Length: 3 ft. Color: Gray.

Category: Air Conditioner Power Cords

Deep Strut - Elongated Holes on Back, Height: 1-5/8", Width: 1-5/8", Material: Polyester Fiberglass, Length: 10 feet. Color: Black.

Category: Fiberglass Strut with Elongated Holes

LEVITON MZD22-102

Category: Dimmer Power Packs

Furniture feed insert with one 1 1/4" and one 1/2" trade size conduit to feed power and communication services. Use with RC9CFFTC Series Covers to form a complete poke-thru assembly. NOTE: RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Right angle fitting for use with LDPH5 and LDS5 raceway, White, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Elbows

MniZ™ Controller, Basic Model, Dual Room, (2) 120-277VAC, 20A 1-pole Relays, No-Dimming

Category: Dimmer Power Packs

1POLE INLINE FUSEHOLDER WITH CRIMP TERMI. The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application. Applications: Street, alley, and parking lot lighting. Security and perimeter lighting. Traffic signals. Outdoor illuminated signs. Sports lighting. Boat electrical circuits. Tractors and yard equipment. General outdoor circuit protection. Benefits: Safety-Permits individual fixture or device to be disconnected from circuit for servicing. Eliminates possibility of shock. Individual fixture fusing-Prevents loss of one fixture through accident, vandalism, or end of life from darkening the entire circuit. Simplifies maintenance- Being able to immediately identify the one faulted fixture eliminates testing the entire circuit, speeds repair and permits servicing the individual unit while the rest of the circuit is functioning. Reduces damage from fault-Can prevent faulted ballast or other failure from severely damaging fixture or device, reducing necessary repair or need of replacement. Features: Watertight-Internal O-ring provides watertight seal. Superior terminal seeds-Ultrasonically-welded terminals provide maximum strength and eliminate leaking at terminals. Break-Resistant- Fiberglass ûreinforced polymer body resists damage from dropping or impact much better than phenolic look-alikes. Flexible terminations-Accommodates a wide range of stranded or solid copper conductors, with either crimp or screw terminals. One-pole and two-pole models- available to accommodate all system voltages up to 600v.

Category: In-Line Fuse Holders

200 Amp, 15500V, Medium Voltage Fuses - E-rated Series

Category: E-Rated Fuses

200 Amp, 2750V, Medium Voltage Fuses - R-Rated Series

Category: R-Rated Motor Circuit Protection Fuses

T-45 raceway base with adhesive and pre-punched mounting holes, 8 foot length.

Category: 1-Piece Non-Metallic Raceway

Inside corner fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 2.49 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 10.00 ft, Width 0.77 in.

Category: 2-Piece Non-Metallic Raceway

Miniature Circuit Breaker Lockout Device, Nylon, Red, 0.4 Inch Length, 1.75 Inch Width

Category: Circuit Breaker Lockout Systems

Right angle fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 3.18 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 8.00 ft, Width 1.52 in.

Category: 2-Piece Non-Metallic Raceway

LUT FCJS-010-BULK8 FIXTURE CO

Category: Occupancy Sensor Power Packs

30 Amp, 15500V, Medium Voltage Fuses - E-rated Series

Category: E-Rated Fuses

PowerLOK, no tool, circuit breaker lockout device, 5 pieces per pack, red.

Category: Circuit Breaker Lockout Systems

20 Amp, 5500V, Medium Voltage Fuses - E-rated Series

Category: E-Rated Fuses

200 Amp, 8250V, Medium Voltage Fuses - R-Rated Series

Category: R-Rated Motor Circuit Protection Fuses