"co2-200 electronics corporation"

LinkIQ™ Cable + Network Tester Kit, Measure Network Capacity Up To 10 Gig Via Frequency Based Measurements, Troubleshoot Ative Networks By Providing Connected Switch Information (Switch Name, Port Number, & VLAN Info), Install & Troubleshoot PoE Devices Via Switch Negotiation & PoE Load Test, Graphical Wiremap & Length Test To Identify Common Faults That Occur With Cabling Installation, Document Work Through LinkWare™ PC Reporting, Support All Industrial Ethernet Protocols (EtherNet/IP, PROFINET, EtherCAT, & Others), Industrial Ethernet Kit Supports Industrial Connectors (M8D, M12D, M12X), Includes LinkIQ Cable+Network Tester, LinkIQ With Remote IDs #1-7, RJ45-RJ45 Patch Cord, AC Charger, RJ45/11 Universal Coupler, Intellitone Pro 200 Probe & Duffle Bag Carrying Case

Category: Network Cable Testers

Infrared Camera, 640 x 480, 60 Hz, Resolution: 640 x 480 (307,200 Pixels, Field of View: 34 x 24°, Temperature Range: -4 to 1202°F

Category: Thermal Imagers

Bluetooth headset, Ti4/3/200, TiX520, TiX560

FLU TPS FLEX 24-TF-II 200/100

INTELLITONE PRO 200 LAN TONER

1000 Volt Electrical Tester With Fieldsense, Simultaneous Voltage and Current Display, 1 to 1000 Volt AC or DC, 0 to 200 Amp AC, Works With Wire Up To 4/0 AWG

Category: Voltage & Continuity Testers

METROLOGY WELL: Lightweight, portable, and fast Insert A, imperial misc. holes , 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics. Includes test leads, and 6-pin DIN connector for reference probe.

METROLOGY WELL: Lightweight, portable, and fast Insert B, imperial comparison holes, 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics.

FLU OFP2-200-SI14/GLD OFP HDR

This combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, combined with the i400 AC current clamp. Together they provide the resolution and accuracy to efficiently troubleshoot any electrical system. The kit includes special accessories to make you even more productive on the job and will save over 15percent compared with the individually priced items. Plus, you'll be working with the most trusted tools in the world. True-RMS accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording give you the results you need. Backlit digital display, analog bar graph, and intuitive design make this meter intuitive to use in the most demanding conditions. Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job. Designed to withstand spikes of more than 8000 V. Audible Input Alert warning against wrong use of input jacks.

FLU OFP2-200-SI16/GLD OFP HDR

Fluke I200s 200a Ac Clamp / W one Connector

Category: AC Clamp Meters

MicroScanner™PoE Industrial Ethernet Kit With Intellitone, Includes MicroScanner™?PoE?Industrial Ethernet?Professional Kit With?IntelliTone?Pro 200 Probe,?Remote ID Kit, Duffle Bag,?Multi-Connector Adapter, Cat 6A Patch Cord, RJ45 Male To RJ45 Female Patch Cord, RJ45/M12X Patch Cord, RJ45/M12D Patch Cord, RJ45/M8D Patch Cord For Testing Of M12X, M12D, M8D Terminated Cables

Category: Network Cable Testers

Infrared Camera, 640 x 480, 60 Hz, Resolution: 640 x 480 (307,200 Pixels), Field of View: 34 x 24°, Temperature Range: -4 to 1202°F

Category: Thermal Imagers

FLU FLUKE-750PD7 PRESSURE MODULE, -15 TO 200 (-1 TO 14 BAR), (-100 TO 1400 KPA)

Category: Process Meters

Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. The 6102 weights less than 10 pounds with the fluid. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: 35 degrees Celsius to 200 degrees Celsius (95 degrees Fahrenheit to 392 degrees Fahrenheit)

FLU FLUKE-750P29 PRESSURE MODULE 0 TO 3000 (0 TO 200 BAR) (0 TO 20 MPA)

INTRINSICALLY SAFE HEADLAMP 200LT OUTPUT

FLU FLUKE-750PA5 PRESSURE MODULE 0 TO 30 (0 TO 2 BAR) (0 TO 200 KPA)

Vibration Tester, Range: 6 - 99999 RPM, Resolution: 0.1 RPM, Rpm Range: Machine Rotational Speed Range: 200 To 12000 RPM, Accuracy: 6 To 5999.9 RPM For Plus/Minus 0.01 PCT And Plus/Minus 1 Digit 5999.9 to 99999 RPM For Plus/Minus 0.05 PCT And Plus/Minus 1 Digit, Display: 1/4 VGA, 320 X 240 Color (5.7 IN Diagonal) TFT LCD With LED Backlight, Memory: 2 GB Internal Plus User Accessible Slot For Additional 2 GB Storage, Parts Included: Viewer PC Software, Expanding Your Data Storage And Tracking Capability, Measuring Units: HZ, Orders, Cpm, IN/S, MM/S, VDB (US), VDB, Dimensions: 1-1/8 IN Depth X 4.8 IN Width

36 PSIG, 5000 PSIG, Dual Sensor Pressure Calibrator. Pressure calibration and temperature measurement for custody transfer applications. The Fluke 721 Precision Pressure Calibrator with dual isolated pressure sensors is the ideal tool for gas custody transfer applications allowing you to take simultaneous static and differential pressure measurements with a single tool. The 721 can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).

Fluke 190 Series II -- 20 years of ScopeMeter« Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter« 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 200 MHz and 2 channels.

Category: Scopemeters

Distance Meter, Laser, Range: 0.16' (0.05m) - 200' (60m), Accuracy: +/- 0.059" (1.5mm), Features: Area & Volume Calculator, Pythagoras Calculator & Auto Off, Includes: Carrying Pouch & (2) AAA Batteries

Category: Distance Meters

AMPROBE CT-326C CIRCUIT TRACE

Category: Circuit Tracers