"f4p ilc750-4"

3/4 Inch PVC 30 Degree Elbow, Schedule 40, Gray

Category: Schedule 40 30° Elbows

Bushing, 1-1/4 Inch, Press-on, Insulating, Threadless, Non-Metallic. For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

Compact Fluorescent Lamp, 18W, Bulb: PL-C (Quad Tube), Base: 4-Pin (G24q-2), Lumens: 1250, CRI: 82, Color Temperature: 2700K, Rated Average Life: 12,000 Hrs. *Philips Part # 38329-9* 80W Equivalent. *** Not for Sale in California, Colorado, Oregon, Rhode Island & Vermont due to State Regulations ***

Category: 4-Pin Base Compact Fluorescent Lamps

Electronic Emergency Ballast with Backup Battery and Charger, Input Voltage: 120/277V, 90 Minute Illumination Time, 24 Hr Recharge. For use with the following 600-1325 Lumen Compact, Linear & U-Bent Fluorescent Lamp Types: (1) 17-40W, 2-4 ft T5, T8, T10, T12, 4-Pin (2G11) or (1) Philips InstantFit LED T8 4' lamp

Category: Emergency Fluorescent Ballasts

SIMPush 1/2" & 3/4" EMT, Push Connect Removal Tool

Category: EMT Push Connect Removal Tools

4" Aluminum Coupling. 8 Threads Per Inch. OD - 4.875". Min. Length - 3-33/64".

Category: Aluminum Rigid Conduit Couplings

Non-Metallic Cable Clamp, Diameter: 3/4", Width: 1/2". For use with: #10 Screw. Package Quantity: 100.

Category: Cable Straps

Rigid Strut Strap, Diameter: 1-1/4 Inch, Material: Aluminum.

Category: Strut Channel Aluminum Conduit Clamps

8/3 VFD Control Cable, Copper, C-L-X Type MC-HL (XHHW-2), UL 600/1000V and CSA 600V Power MC-HL Cable - Aluminum Sheath, 3/C VFD & 4/C Copper Conductors/90°C Wet or Dry Rating, 600/1000V Marine Shipboard Cable, For Cable Tray Use - Sunlight Resistant - For Direct Burial, Black

Category: Armored / Sheathed Offshore & Marine Shipboard Flexible Multi-Conductor Control Cable

12/3 VFD Control Cable, Copper, C-L-X Type MC-HL (XHHW-2), UL 600/1000V and CSA 600V Power MC-HL Cable - Aluminum Sheath, 3/C VFD & 4/C Copper Conductors/90°C Wet or Dry Rating, 600/1000V Marine Shipboard Cable, For Cable Tray Use - Sunlight Resistant - For Direct Burial, Black

Category: Armored / Sheathed Offshore & Marine Shipboard Flexible Multi-Conductor Control Cable

Conduit Body, Type: LB, Size: 3/4", Material: Die Cast Aluminum.

Category: Type LB Aluminum Conduit Bodies

Conduit Body Cover with Neoprene Gasket, Type: Screw-On, Size: 1-1/4 Inch, Mark 9, Aluminum, For Use With Aluminum Conduit Bodies

Category: Aluminum Conduit Body Covers With Gaskets

Cold Shrink, Connector Insulators, Shielded Cable, 1 kV, Conductor Range: 6 AWG - 4 AWG, Insulation Diameter Range: 0.31" - 0.56", Relaxed Tube Length: 6.0". For use with all Solid Dielectirc (rubber and plastic) insulated wires and cable under 1000 Volts in Indoor, Outdoor, Direct Burial and Submersible Applications.

Category: Low Voltage Cold Shrink Connector Insulators

11 Pin, Timing Relay, 250V Rated, 10 Amp, SPDT, 120V Coil, TDU Series, 4 Time Ranges: 0.15 Seconds - 64 Minutes. Knob Adjustable. 6 Modes of Operation: Interval, On-Delay, Off-Delay, Single Shot, Flasher-Off First and Flasher-On First. Jumper Selectable Range and Mode. High Repeat Accuracy.

Category: 11-Pin Timing Relays

Hexagonal Nylon Locknuts with NPT Threads, Black

Category: Non-Metallic Conduit Locknuts

Patch Cord, 4 Pair / 24 AWG, CM, CAT 6, RJ45, Strain-Relief/Snag-Proof Boot, Unshielded, Twisted-Pair, Green, Length: 14 ft.

Category: Category 6 Patch Cords

Safety Controller Expansion Module, Dual Relay Output Module, 4 Normally Open Safety Outputs, 6 Amp, 2 Normally Closed Auxiliary Outputs, 2.5 Amp, Used with XS26-2 Safety Controllers

Category: Intelligent Safety Relays

C-L-X Terminating Tool Kit, 120V, Contains: 1 Cable Slitting Saw, 1 Small Cable Guide, 12 2” dia. High Speed Steel Saw Blades, 1 Tubing Cutter, 1 Channel Lock Pliers, 1 10' Retractable Tape, 1 5/16” x 11” Screwdriver, 1 Cable Knife, 4” Blade, 1 Hacksaw Blade Holder, 3 10” Hacksaw Blades, 1 Tool Case & 1 Padlock with 2 Keys

Category: Datacom Termination Tools

Conduit Body, Malleable Iron, TA Type, Hub Size: 3/4 Inch

Category: Type TA Iron Conduit Bodies

MMM FP301-3/4-48"-BLACK-50 PC

Category: Thin Wall Heat Shrink

1-1/4 Inch Form 7 (LU) Conduit Elbow for Use with Rigid/IMC Conduit

Category: Type LU Iron Conduit Bodies

Cable Gland Adapter, Male/Female, M20 x 3/4 Inch NPT, Nickel Plated Brass, For Use With Cable Glands in Hazardous Areas.

Category: Metric Cable Gland Adapters

40V max XGT® Brushless Cordless 4-1/2” / 5" Paddle Switch Angle Grinder, with Electric Brake, Electric Brake Stops The Grinding Or Cut-Off Wheel In 2 Seconds or Less For Maximum Productivity, Includes: Grinding Wheel, Wheel Guard And Side Handle ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Grinders

Conduit Hub, 4 Inch, Insulated, Raintight, Zinc Die Cast, Threaded For Use With Rigid/IMC Conduit

Category: Die Cast Zinc Conduit Hubs