"vpkg-11-cgi"

C-H HVX003A1-2A1B1B5 HVX9000

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

C-H HVX00312BAP1 HVX9000 ENCL

Category: 240 Volt Load HVAC Variable Frequency Drives

4-1/2" - 5" Paddle Switch Grinder With No Lock On, 13 Amp, 1700 Watt, 2.3 Horsepower, Maximum Speed: 11000 RPM, Spindle Thread: 5/8"-11, Switch Type: Paddle. Includes: Grinder, Side Handle, Inner And Outer Flange, 5" Type 27 Guard

Category: Corded Grinders

C-H HVX003A2-2A1B1 HVX9000 IS

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

M18™ FORCE LOGIC™ 600 MCM Crimper Kit* with #8 – 350MCM Al Dies *350MCM Al,. Includes: (1) M18™ FORCE LOGIC™ 600 MCM Crimper, 12 Different Dies (See Cut Sheet for Sizes), (2) M18™ REDLITHIUM™ CP2.0 Battery (48-11-1820), (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) & (1) Carrying Case

Category: Cordless Crimpers

OZ-Gedney Type THR Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 4-11/16 IN, 5/16 IN Mounting Hole Width, 2 Holes, 1 IN Width, Length: 5-23/32 IN, Trade Size: 2-1/2 IN, Applicable Third Party Standards: CSA C22.2 No.18, Federal Specification FF-S-760, For Supporting Rigid Conduit, IMC And EMT Conduit

Category: Steel 2-Hole Conduit Straps

LED Round High Bay, 150 Watt, 18000 Lumen, 5000K, 120-277 Volt, Dimmable, Medium Distribution, White Finish, 11 Inch Diameter

Category: LED - High Bays

3/8-Inch Impact Wrench Kit, Includes: M12 FUEL™ 3/8" Impact Wrench (2454-20), (2) M12™ REDLITHIUM™ CP2.0 Battery(48-11-2420) & (1) M12™ Lithium-ion Battery Charger (48-59-2401)

Category: Cordless Heavy Duty Impact Drivers

Wall Lantern, LED, 11W, 738 Lumens, 5000K, 25,000 Hours, White

Category: Outdoor Decorative LED Wall Lanterns

21PC Titanium Nitride Coated Speed Tip Drill Bit Set, Includes: (2) 1/16", (2) 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 11/64", (2) 3/16", (2) 13/64", 7/32", 15/64", 1/4", 5/16", 3/8", 1/2" & TOUGH CASE® Container

Category: Drill / Power / Insert Bit Kits

Rigid Expansion Coupling, 2 Inch, 8 Inch Movement, Length: 11-1/8 Inch, Concrete Tight, Weatherproof, Malleable Iron, Use with Appleton Bonding Jumper BJ-1520-24, For Use with Rigid/IMC Conduit

Category: Iron Rigid Conduit Expansion Couplings

M12™ Heated Toughshell™ Jacket Kit, Size: 3XL, Includes: (1) M12™ Heated TOUGHSHELL™ Jacket (204-20), (1) M12™ REDLITHIUM™ 3.0 Compact Battery Pack (48-11-2430) & (1) M12™ Compact Charger & Power Source, Red

Category: Heated Jackets - Kits

Lamp Changer. For use with 1-11/2"/38.1 mm diameter, spring-loaded lamps up to 8'/2.4 m long. Includes changer head and two-section aluminum telescoping pole extending to 12-1/2’/3.8 m. ***Discontinued***

Category: Suction Type Lamp Changers

Right Angle Hole Hawg, M18, Cordless, RPM: 0 - 1500, Voltage: 18V, Auger Bit: Up To 1-1/4", Self Feed Bits: Up To 2-9/16", Weight: 9 lbs, Includes: (1) M18 FUEL™ HOLE HAWG® 1/2" Right Angle Drill (Tool Only) (2807-20), (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812), (1) M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack (2 Pk) (48-11-1862), (1) Contractor Bag & (1) Chuck Key

Category: Cordless Heavy Duty Right Angle Drills

OCA LBY45SA-G PVC CTD FEM-FEM

Category: Type LB PVC Conduit Bodies

Banenr SMB700 Bracket: Right Angle Mounting, Material: 11 Gauge Stainless Steel, 2-axis mounting. Supplied with cable gland assembly and lock washer. Part Number: 16640.

Category: Sensor Mounting Brackets

M12™ Heated Toughshell™ Jacket Kit, Size: Small, Includes: (1) M12™ Heated TOUGHSHELL™ Jacket (204-20), (1) M12™ REDLITHIUM™ 3.0 Compact Battery Pack (48-11-2430) & (1) M12™ Compact Charger & Power Source, Black

Category: Heated Jackets - Kits

LED A19 Bulb 11W 2700K Dimmable OmniDirectional E26 120V - 1100 Lumen - 15000 hours - 80CRI

Category: A-Type Traditional LED Lamps

LED Downlight Retrofit, 11 Watt, 5/6" Recessed, 120 Volt, 750 Lumens, 2700K, 35,000 Life Hours

Category: 5" / 6" Recessed LED Downlights

M28 Cordless Rotary HammerRotary Hammer, M28, Cordless, RPM: 0 - 1400, BPM: 0 - 4700, Impact Energy: 2.1 ft-lbs, Voltage: 28V, Chuck: 1" SDS Plus, Weight: 9.6 lbs, Includes: (2) 28V Lithium Batteries (48-11-2830), 1 Hour Charger (48-59-2819), Carrying Case, Side Handle, Depth Gaug

Category: Cordless Heavy Duty SDS Rotary Hammers

Dimmable 12W Constant Driver: Input Voltage: 100-120V AC, Output Voltage: 12V DC / 3-12W (non-dimming) 4-12W (dimming applications): 15-100% (with TRIAC for most products), Input wire: 6ft 18AWG power cord + 2-prong polarized plug, Output Wire: 5ft 24AWG tail with 4-port terminal block. Dimensions: 5-1/4”L x 2”W x 11/16”H.

Category: LED Driver Power Supplies

SXX 2091010PG2M1103

Category: Industrial Duty Pressure Transducers

GRE LS100X11SBSP INTELLIPUNCH

Category: Hydraulic Punch Drivers

ABB ACS380-040C-25A0-4+K491+L

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives