"ab-1010uc the austin co."

Knee Pads With Non-Marring Shell Material To Prevent Scarring And Marking On Finished Surfaces, Slip-Resistant Caps Grip Kneeling Surface For Enhanced Stability And Balance, Gel And Eva Foam Padding Design Provides Lightweight Comfort And Protection During Extended Use, Top Strap Is Elastic; Bottom Strap Is Webbed, Perfect For Indoor Work On Finished Flooring And Sensitive Surfaces To Prevent Scarring Or Marking On Surfaces, Designed For Professional Men And Women In Trades That Require Work On Or Near The Ground, Sold In Pairs And One Size Fits All

Category: Knee Pads

nVent ERICO copper bonded rods combine the strength of steel for ease of installation with molecularly bonded copper for long lasting corrosion resistance. Pointed, 3/8" x 5' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

Front/Rear Plinths, PF allow cabling without any restrictions and creates extra space under the enclosure. This Front/Rear Plinths, PF, PF1060 item measures 100x598x63mm with a material of Zinc Plated, Mild Steel, color Umbra Gray.

Category: Enclosure Housing Bases

C-H MB48B200BTSG 1 IN TYPE BR, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

Eaton resi meter breaker, All-in-ones, 150A, C, Aluminum, NEMA 3R, Bottom and top, #6-350 kcm22 kAIC, #6-350 kcmCSR2150, Surface mounting, 8, Four-jaw, 1, 4, Single-phase, Ringless, Used with BR breakers, 120/240 Vac, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

4" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

Clevis Hanger, 1/2 Inch Pipe, 3/8 Inch Rod, Steel/Electro-Galvanized, Recommended For the Suspension of Stationary Pipe

Category: Strut Channel Clevis Hangers

Loop Hanger, Standard Duty, 1/2 Inch, Rod Size 3/8 Inch, Steel/Pre-Galvanized, Recommended For The Suspension of Stationary Pipe

Category: Strut Channel Clevis Hangers

The extra heavy cable tie mount in green is applied with a #10 (M5) screw. It is made of polypropylene for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

2-1/2" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

CUT UTRS213BE MTR SKT, 200A, RINGLESS, OH/UG,GRND CONN. UL, HUB OPENING, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Front/Rear Plinths, PF allow cabling without any restrictions and creates extra space under the enclosure. This Front/Rear Plinths, PF, PF1100 item measures 100x998x63mm with a material of Zinc Plated, Mild Steel, color Umbra Gray.

Category: Enclosure Housing Bases

25 Amp, 1-Pole, Compact Definite Purpose Contactor, 600V Rated, Binding Head Screw Terminals, 277V AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 1-Pole Definite Purpose Contactors

ProTek Rack Angles support 19in rack equipment in the single and double-hinged ProTek product. This ProTek Rack Angles Square, PTRA36S item measures 33.25 19U with a material of Steel finish Plated.

Category: NEMA 4 Wall Mount Enclosures

C-H CMBXB200BTS SINGLE METER SOCKET W/200A MAIN, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Mounting Box Only, Vertical, Deep, Paintable Features: Flange, Includes NM Cable Connector, Application: GFCI, Vertical Mounting Fixture, Material: UV Rated Plastic, Size: 6.50 x 1.62 x 6.50 Inch, Cubic Inches: 24.5, White, Non-Metallic

Category: Non-Metallic Through The Wall Switch / Outlet Boxes

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 1-3/4 IN Outside Diameter, 0.88 IN Inside Diameter, 1 X 1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

Black Resin Thermal Transfer Ribbon For Use With The TDP43ME Thermal Transfer Desktop Printer, Use With Polyester And White Polyimide Labels, Continuous Vinyl Tape, Marker Plates, And Raised Panel Labels, 4.25 Inches Wide x 300 Feet Long

Category: Label Printer Ribbons

C-H MBT48B125BTS 1 IN TYPE BR, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Main Service Module, Main Fusible Switch, 600 Amp, 3-phase, 100kaic With Class Tfused, Fuse Not Included, Main And Neutral Lugs Included, 120/208 Vac, Bottom Feed, Aluminum Bus Material, NEMA 3 - Rainproof Enclosure, With Pull Box, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

Liquidtight Connector, 3 Inch, 90°, Insulated Throat, External Grounding Lug, Zinc Electroplated Steel, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Light duty strobe designed for indoor and outdoor applications. The strobe is electrically isolated from leakage current to prevent false flashes and has been designed for PLC applications. May be direct, 1/2 in. conduit mounted or box mounted on a 4 in. octagon box

Category: Non-LED Beacon - Strobe

Super-Grip® Cable Ties are designed with high strength and flexibility to tightly grip bundles and resist lateral movement despite the rough conditions of MRO and construction environments. Plus, with weather-resistant Nylon 6.6 material, it's ideal for i

Category: Non-Releasable Cable Ties