"hom or 1515 or hom115"

Clarity 5E Modular Patch Cord, 3', white

Category: Category 5e Patch Cords

ORT 63700069 TRACJACK,3.5MM STEREO

Category: Snap-In RCA Jack Inserts

The Upper Trough attaches to the top of a rack where it supports and contains cable with proper bend radius. It is compatible with any standard EIA 19 inch (483mm) rack or cabinet. The trough is 2RU in height, 4.5 in. deep and is black in color.

Category: Rack Cable Management Devices

Use with RC9CMD and RC9AM2TC Series Covers to complete installation. NOTE: RC9AMD and RC9AM2TC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. TR indicates tamper-resistant version secured with tamper-resistant screw. Finish - Aluminum

Category: Square / Rectangle Recessed Box Covers

Accepts only Ortronics datacom inserts. Supplied with both adapters to accommodate two TracJack devices or one Series II device. Finish - Anodized Aluminum

Category: Large 2-Piece Metallic Raceway Cover Plates

Non-Metallic, Bezel Box/Surface Mount Box for Raceway or Standalone Application, Eclipse Series. Size: 3-5/8" Length, 2-7/8" Width. Accepts 2 front-loaded outward facing devices. Color: Ivory.

Category: 2-Gang Raceway Device Boxes

T-45 entrance end fitting. With knockouts for 1/2", 3/4", 1" and 1 1/4" conduit which allows entry from ceiling or wall, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway End Fittings

Clarity 5E Modular Patch Cord, 9', gray

Category: Category 5e Patch Cords

TracJack Adapter Plate for furniture opening, rear load, three-port, Fog White

Category: Snap-In Wallplate Inserts

Eaton B-Line series strut pipe clamps and accessories, .1015" height, 6.703" length, 1.25" width, 1000 lbs, Steel, Pre-assembled combination recess hex head screw, Pipe or conduit clamps, Stainless steel 316

Category: Strut Channel Aluminum Conduit Clamps

Straight Blade Plug 2pole 3wire 15amp 125volt, Orange

Category: 15 Amp Straight Blade Plugs

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP3740 item fits 370x400mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Front Plates

Duplex Receptacle Outlet, Extra Heavy-Duty Industrial Specification Grade, Two Outlets Marked "Controlled", Tamper-Resistant, Smooth Face, 15 Amp, 125 Volt, Back or Side Wire, NEMA 5-15R, 2-Pole, 3-Wire, Self-Grounding - Light Almond

Category: Tamper Resistant Industrial Grade Receptacles

JACK MARKER DATA BLACK

Category: Snap-In Wallplate Inserts

Weatherproof Self Closing Cover, 1 Gang, Duplex Receptacle or Switch Type, Horizontal Mount, Aluminum Die Cast, White, Gasket and Mounting Hardware Included.

Category: 1-Gang Metallic Weatherproof Box Covers

Multi-Tap Connector, 3-Port, Insulated, Clear, 10 AWG - 250 MCM, 2-Sided, For Aluminum or Copper Conductors

Category: Dual Sided Entry Wire Connector Blocks

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 3 IN, Conductor Range: 1.875 - 2.25 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated B

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Type TNS Threaded Conduit End Bell, Size: 3 IN, Malleable Or Ductile Iron, Finish: Hot Dip Galvanized, Dimensions: 6-3/8 IN Diameter X 3-1/8 IN Length, 2-3/8 IN Bell, For Rigid Conduit And IMC

Category: PVC Bell Ends

Surface mount box for use with Eclipse Raceway or standalone application. Has two 1/2" trade size KOs. Accepts four front-loaded downward facing Ortronics TracJack inserts. Finish - White

Category: 2-Gang Raceway Device Boxes

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two 10ATCPB plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

3M Tubing BBI-A is made of specially formulated, cross-linked, flame-retardant, track-resistant polyolefin that will shrink to fit rectangular, square or round bus bars.

Category: Bus Bar Heat Shrink Tubing

Duplex Receptacle Outlet, Extra Heavy-Duty Industrial Specification Grade, Two Outlets Marked "Controlled", Tamper-Resistant, Smooth Face, 15 Amp, 125 Volt, Back or Side Wire, NEMA 5-15R, 2-Pole, 3-Wire, Self-Grounding - Brown

Category: Tamper Resistant Industrial Grade Receptacles

Duplex Receptacle Outlet, Commercial Specification Grade, Split-Circuit, One Outlet Marked "Controlled", Tamper-Resistant, Smooth Face, 15 Amp, 125 Volt, Back or Side Wire, NEMA 5-15R, 2-Pole, 3-Wire, Self-Grounding - Black

Category: Tamper Resistant Commercial Grade Receptacles