"ab-664ws the austin co."

The PanZone® Cable Bend Radius Post reduces strain on cables when transitioning between horizontal and vertical pathways without taking up any valuable rack space. Black, 2pc + hardware, 4in deep.

Category: Cable Tie Tools

Braided Expandable Sleeving, 0.75" diameter (19.1mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, white, Flame Retardant, Polyethylene Terephthalate, 500 ft. per reel

Category: Braided Expandable Sleeving

WATT PW-301-W-U PIR WALL SWCH OCC SENSOR 120/277 OPTIONAL NEUTRAL CONNECTION ** MADE IN THE USA **

Category: Passive Infrared Wall Switches

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 316 AISI stainless steel with a fold-over lock, it is ideal for severe weather, intense UV rays, high vibration and galvanic corrosion. Low-profile buckle, 18"L (45

Category: Non-Releasable Cable Ties

The low profile cable tie mount in natural color is applied with a #5 (M3) screw. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature cable ties. It is designed for indoor enviro

Category: Cable Tie Bases

Braided Expandable Sleeving, 1.50" diameter (38.1mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, gray, Flame Retardant, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

Braided Expandable Sleeving, 0.38" diameter (9.5mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, gray, Flame Retardant, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

The snap-in cable tie mount in gray is applied with rubber adhesive tape. It is made of ABS for indoor environments. It comes in packages of 100.

Category: Cable Tie Bases

CUT 1008793CH 320A MTR SOCKET, 5 TERMINAL (9 O'CLOCK POS), OH/UG, LG HUB O, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP4750 item fits 470x500mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Back Panels

The Tak-Ty hook and loop cable tie mount in natural is mounted with a rubber adhesive. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with HLT/

Category: Cable Tie Bases

The cable tie mount in white is mounted with a #6 (M3) screw or user supplied adhesive. It is 1" long x 1" wide (25.4 x 25.4 mm), made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, i

Category: Cable Tie Bases

Replacement Socket for 90-Degree Impact Wrench, Works with Klein's 90-Degree Impact Wrench (Cat. Nos. BAT20LW and BAT20LW1), Remove The Socket To Alternate Between Sizes (3/4-Inch and 13/16-Inch)

Category: Sockets & Socket Sets

Test + Map™ Remote #4 for Scout® Pro 3 Tester, Cable Tester Replacement Remote Identifies, Tests & Maps A Location In One Step When Used With The Scout® Pro Series Of Testers (Sold Separately), Test Voice (RJ11/12), Data (RJ45) & Video (Coax F-Connector) Terminated Cables

Category: Network Cable Testers

With metric sizing, appealing design and a suit of accessories the MAS is a perfect global solution. This Single Door Enclosure Mild Steel, MAS with Plate, MAS0808040R5 item measures 800x800x400mm with a material of Mild Steel color Light Gray.

Category: NEMA 4 Wall Mount Enclosures

With metric sizing, appealing design and a suit of accessories the MAS is a perfect global solution. This Single Door Enclosure Mild Steel, MAS with Plate, MAS0405021R5 item measures 400x500x210mm with a material of Mild Steel color Light Gray.

Category: NEMA 4 Wall Mount Enclosures

Extra deep pre-cut pushbutton enclosures give the most room for deep contact blocks and wiring. This Extra-Deep Pushbutton Enclosure Type 12, E1PBXY item measures 1PBx30.5mm with a material of Steel colored Safety Yellow.

Category: Steel Pilot Device Enclosures

With metric sizing, appealing design and a suit of accessories the MAS is a perfect global solution. This Single Door Enclosure Mild Steel, MAS with Plate, MAS1206030R5 item measures 1200x600x300mm with a material of Mild Steel color Light Gray.

Category: NEMA 4 Wall Mount Enclosures

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

For covering unused compartments in the device bracket. Light Gray

Category: 1-Gang Raceway Box Covers & Faceplates

3M™ Scotchlok™ 31100 2 Hole Compression Lug is for use with copper conductors only. The seamless copper construction offers high conductivity and a tin plated finish resists corrosion. It is rated for 35 kV voltage applications.

Category: 2-Hole Long Barrel Copper Compression Lugs

10 kVA VA, 1-Phase, 120 x 240 Primary Volts - 16/32 Secondary Volts, Buck-Boost Transformer, Non-Encapsulated, Indoor/Outdoor, 50/60Hz. ***Use attached Catalog Page to see the many input and output options***

Category: 6 - 10 KVA Buck-Boost Transformers

The 3M™ Scotchlok™ Connectors 20000 Series can be used with either copper or aluminum conductors. These aluminum connectors feature color coded end caps for identification. Contact aid provided in connector is compatible with poly/EPR insulations. Each connector is electro tin plated to resist electrolytic corrosion, and have a solid center stop. (UL 486B Listed)

Category: Standard Barrel Aluminum Compression Sleeves