"ab-66jp the austin co."

C-H S811+V36N3S 290MM 360A

Category: Advanced Control Softstarters

Extra deep pre-cut pushbutton enclosures give the most room for deep contact blocks and wiring. This Extra-Deep Pushbutton Enclosure Type 12, E10PBXM item measures 10PBx22.5mm with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

Extra deep pre-cut pushbutton enclosures give the most room for deep contact blocks and wiring. This Extra-Deep Pushbutton Enclosure Type 12, E9PBXM item measures 9PBx22.5mm with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

Extra deep pre-cut pushbutton enclosures give the most room for deep contact blocks and wiring. This Extra-Deep Pushbutton Enclosure Type 12, E25PBXM item measures 25PBx22.5mm with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

300 VA, 1-Phase, 200/220/440, 208/230/460, 240/480 Primary Volts - 23/110, 24/115, 25/120 Secondary Volts, MTE Industrial Control Transformer, 55 Degree C, Copper Magnet Wire, 50/60 Hz Operation. Includes: Fuse Clips on the Secondary Side for 13/32 x 1-1/2" Fuses.

Category: 250 - 450 VA Industrial Control Transformers

For covering up set screws in the Syspend 281-Max tubes for an attractive smooth finish. This Syspend 281-Max Tube Hole Plugs, S2MTHP item measures 3.94x5.91x0.00 inches with a material of Plastic colored White.

Category: Industrial Consolet Mounting Accessories

For mounting between a tube and the enclosure allowing 15-degree enclosure tilt. This CS480 Angle Coupling, CCSS48AC15 item fits 48.3mm Tube with a material of SS Type 304.

Category: Enclosure Mounting Bracket Kits

Multifunction Logic Card, 0.15 to 15 Esc. Time adjustment, For the MP Series Modular Photoelectric Sensors

Category: Sensor Replacement Kits

Tree and Pole Climbers with 1-9/16-Inch Gaffs, Secure sleeve and leg iron connection. Two slotted hex-head bolts with lock washers and barrel-type nuts join the steel sleeve and leg iron together

Category: Pole Climbing Gaff Guards

Midwest ElectricÆs Temporary Power and Power Outlets are a means of providing power required by various construction trades, residential sites, and mobile electrical applications. Temporary Power and Power Outlets offer one or more receptacles, with or without overcurrent protection, disconnecting, metering, and/or pedestal mounting functions, in a single enclosure of G-90 zinc-coated steel. The NEMA 3R rainproof enclosure is lockable and engineered to provide maximum protection against weather, vandalism, and normal field use.

Category: Unmetered Temporary Power Outlets

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.250 x 0.032 (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.57" (14.5

Category: Female Nylon Insulated Wire Disconnects

The vibration resistant, right angle style female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.205/0.187 x 0.020 (5.2/4.7 x 0.5 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.

Category: Female Nylon Insulated Wire Disconnects

Short Barrel Copper Lug, one hole with peep hole, wire range of 6 AWG. Produced from high conductivity copper tubing. Allows easy inspection of the termination to assure complete cable insertion. Marked with die index and color coded blue. cULus Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

Liquidtight Connector With External Grounding Lug, Insulated, 90°, 2-1/2 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit.

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Braided Expandable Sleeving, 1.25" diameter (31.8mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

Pre-printed Wire Marker Books are conveniently pocket-sized, containing wire labels printed on vinyl cloth. Markers are durable enough for up to 5 years outdoor UV Resistance, oil and abrasions. They can also be torn in half to label each end of the condu

Category: Wire Marker Booklets

GED TSF420CSCU 200A OH/UG SFC PNL, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Easily mount enclosures at the installation site without any need for internal access. This Wall Mounting Brackets, AW, AW41 item measures 36x76x21mm with a material of Mild Steel, finish Zinc Plated.

Category: Enclosure Mounting Bracket Kits

The adhesive mount in white is mounted with rubber adhesive tape and measures 2" x 2" (50.8mm x 50.8mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor environments and come

Category: Miniature Cable Ties

nVent ERICO copper bonded rods combine the strength of steel for ease of installation and molecularly bonded copper, with roll threading process for long lasting corrosion resistance. 5/8" x 5' ground rod with 10 mil plating thickness.

Category: Copper Ground Rods

5 KVA, 1-Phase, 240 x 480 Primary Volts - 24/28 Secondary Volts, Buck-Boost Transformer, Non-Encapsulated, Indoor/Outdoor, 50/60Hz. ***Use attached Catalog Page to see the many input and output options***

Category: 1.6 - 5 KVA Buck-Boost Transformers

Panduit PLT8H-C0 Locking Cable Ties are designed to satisfy the needs of weather resistant applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Heavy cross section, 30.6" (779mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 100.

Category: Non-Releasable Cable Ties

Extra deep pre-cut pushbutton enclosures give the most room for deep contact blocks and wiring. This Extra-Deep Pushbutton Enclosure Type 12, E3PBXM item measures 3PBx22.5mm with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution