"l-104"

Heat Shrink, Heavy-Wall, 250 - 750 MCM, 48", Black, 2" Expanded I.D., .63" Recovered I.D., .16" Nominal Recovered Wall Thickness, Model TS-46-750, Rated for 600V, 90 Degree Celsius

Category: Heavy Wall Heat Shrink

10250T, 30.5 mm, Heavy-Duty, NEMA 3, 3R, 4, 12, 13, Non-illuminated, 2 keyed positions (free momentary, lock down), Key, Silver actuator, Chrome bezel

Category: 30mm Keyed Pushbutton Operators

Connector 5wire 30amp 347/600volt Turnlok

Category: 30 Amp Non-NEMA Twist Lock Connectors

Turnlok Flanged Inlet, 4wire 30amp 250volt, Gray

Category: 30 Amp NEMA Twist Lock Inlets

L-fse 313-1.25 250v Small Dim fuse

Category: Electronic Time Delay Fuses

Eaton B-Line series standard pipe clamp, 0.75" H x 3" L x 1.62" W, Steel, Electro-plated, 0.75" max pipe size, .31" bolt/pin size

Category: Strut Channel Universal Conduit Clamps

ALL FB-6NCVR RCT DEC NI FLP L

Category: Square / Rectangle Recessed Box Covers

Turnlok Single Receptacle, 3wire 30amp 277volt

Category: 30 Amp Non-NEMA Twist Lock Receptacles

Dura-Blok Rooftop Channel Support, Rubber, 500 lbs, Dimensions: 4" H x 6" W x 9.6" L

Category: Pyramid Pipe & Equipment Supports

PW-150-W 1/2” Diameter x 1 1/2” L, White

Category: Pre-Wire Plugs

Eaton main fusible switch, 800A, Aluminum, NEMA 3R, Overhead, Class T, Class L, 100 kAIC, Three-wire, Single-phase, Barrier kits: 400A-800A fusible switches: Bottom feed-3MFSBBK, Top feed-3MFSTB, 120/240V, (4) #3/0 AWG-750 kcmil, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Group Metering Main Terminal Boxes

L-fse 313-.062 250v Small Dim fuse

Category: Electronic Time Delay Fuses

PAS L1830-R R SGL 4W30A120/20

Category: 30 Amp NEMA Twist Lock Single Receptacles

Eaton arrow hart watertight plug closure cap, Yellow, 1000 psi, Santoprene, Used with 30A

Category: 15 Amp Straight Blade Plugs

OZ-Gedney Tray-Bond Type CTC Cable Tray Clamp, Trade Size: 3 IN, Malleable Iron, U-Bolts And Nuts: Steel, Finish: Mechanically Galvanized, 190 LB-IN Recommended Installation Torque, 3/8-16 UNC U-Bolt And Nut, Dimension W: 5-5/8 IN, Dimension L: 5-1/8 IN, Dimension T: 3/8 IN, Dimension U: 5-1/4 IN, Meets NEC 318-7 (b)(4) Bonding Requirements, Third Party Certification: UL File Number E-24264, CSA 009795 , Applicable Third Party Standards: UL 467, CSA C22.2 No.18, For Connecting And Grounding Rigid Conduit, IMC Or EMT To Cable trays

Category: Conduit To Cable Tray Adapters

1 GROUND BUSHING INSULATED 150 C 4 TO 14 ALUMINUM LUG

Category: Threaded Ground Bushings

P&s L1230-p Lkg Plug-NEMA L12 -30p

Category: 30 Amp NEMA Twist Lock Single Receptacles

Eaton B-Line series thinwall conduit clamp, 0.0677" H x 2.7540" L x 1.25" W, Steel

Category: Strut Channel EMT Conduit Clamps

Panduit PLT8H-C0 Locking Cable Ties are designed to satisfy the needs of weather resistant applications, while delivering consistent performance and reliability. Featuring a curved tip to allow for easy pick up from flat surfaces and faster initial threading. Heavy cross section, 30.6" (779mm) length. Made of Weather Resistant Nylon 6.6 with high resistance to ultraviolet light, are black in color and come in packages of 100.

Category: Non-Releasable Cable Ties

Panduct Wide Slot Wiring Duct, Type G, 1.75" W x 3.12" H x 6' L, Lead Free PVC, Gray, Adhesive Backing, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

M12™ Black Heated Jacket, Size: Large, Includes: (1) Battery Holder ***M12 Lithium Battery Not Included***

Category: Heated Jackets

Rigid Conduit Strap, 1-Hole, 1-1/4 Inch, Steel, For Use With Rigid/IMC Conduit

Category: Steel 1-Hole Conduit Straps

Door For A_wflp, Left, Anoka, Bulletin A12y (type 12 Medium Wall-mounted Enclosure Accessories), Size/dims: Fits 30x48, Material/finish: Steel/gray

Category: Enclosure Surface Covers & Doors

CIR FLT44 FILTER FOR USE W/ L

Category: Enclosure Louver Plate Filters