"b610-05-044-06 jmc steel group"

Aire Dock, with Claw, Cap Screw, Black

Category: Solar Mounting Hardware

OMC J262404-05 24/4PR CAT5E CMR

Category: Category 5e Non-Plenum Cable

Post Base, Diagonal Channel Position, Steel

Category: Post Base Strut Channel Connectors

Channel Nut W/ long spring, Thread Diameter: 3/8", Material: Steel, Finish: Stainless Steel. For Use w/ PS 200, 210, 300.

Category: Strut Channel Spring Nuts

2-1/2 Inch Rigid Steel 30 Degree Elbow

Category: Rigid 30° Conduit Elbows

Hammer-On Flange Clip, Bottom Mount, Spring Steel, 13/16"–1 1/8" Flange

Category: Flange Clips

Cooling Fan Package, Diameter: 6", 115V, 50/60Hz, Stainless Steel

Category: Enclosure Cooling Fan & Exhaust Packages

Floor Standing Enclosure, NEMA 4, Two Door With 3 Point Latch, 74 x 60 x 18 Inch, Steel With Gray Powder Coat Finish

Category: NEMA 4 Floor Mount Enclosures

Steel, Blank End Fitting, 6000 Series. SIze: 1-1/2". Ivory.

Category: Large 2-Piece Metallic Raceway End Fittings

Quick-Release Flat Sealing Plate, 4.00x4.00, Steel

Category: Wireway Closure Plates

Lay-In NEMA Type 12 Hinged-Cover Wireway, Straight Section, Gasketed, Size: 4 Inch Width, 4 Inch Depth, 5 Foot Length, 14 Gauge Steel, ANSI 61 Gray Polyester Powder Finish. No Knockouts.

Category: Hinged Cover Wireway

Enclosure, NEMA 4/12, Concept Series, Hinge Cover With Quarter Turn Latch, 12 x 12 x 6 Inch, Steel With Light Gray Powder Coat Finish

Category: NEMA 4 Wall Mount Enclosures

Gang Box, 6-Gang, Welded, Steel, Depth: 2-1/2 Inch. Width: 14-11/16 Inch. Side Knockouts: (4) Concentric KOs, Bottom Knockouts: (6) 3/4 Inch and (6) Concentric KOs, Top Knockouts: (6) 3/4 Inch and (6) Concentric KOs, Back Knockouts: (6) 1/2 Inch and (4) 3/4 Inch, Cubic Inches: 150 Inch.

Category: Metallic Gang Boxes

Split Ring Clamp, 1-1/2 Inch Diameter, Stainless Steel, Includes Hardware

Category: Split Pipe Clamps

Floor Box, 4-Gang, Shallow, 4 Compartments, (20) Knockouts 3/4 to 1-1/2 Inch, Steel

Category: Recessed Compartment Boxes

Thin wall heat shrink, .06" (1.6mm) diameter, green cross-linked polyolefin, 25 pc. package quantity.

Category: Thin Wall Heat Shrink

Female/Female Union, Size: 2 inch, Material: PVC Coated Steel.

Category: PVC Coated Female-Female Unions

Panel for Junction Box Size: 12" x 12", Material/Finish: Steel/Galvanized

Category: Enclosure Back Panels

Sealing Locknut, 1/2 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

4-Gang Duplex Device Receptacle Wallplate, Standard Size, Device Mount - 302 Stainless Steel

Category: 4-Gang Duplex Receptacle Wallplates

Liquidtight Grounding Hub, Trade Size: 3", Material: Stainless Steel

Category: Stainless Steel Conduit Hubs With Grounding

Quarter Turn Latch, Concept Series, Material: Stainless Steel

Category: Padlock Kits For Junction Boxes

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: Stainless Steel Wall Mount Enclosures

Liquidtight Grounding Ferrule, 3/8 Inch, Steel, For Use In Appleton ST Series Only

Category: Liquidtight Connectors - Accessories