"in wall romex splice"

Caution Buried Fiber Optic Line Below - Detectable Tape - 3" x 1000' Consists of a minimum 5 mil overall thickness with no less than a 35 gauge solid aluminum foil core, which allows for easy detection of underground utilities. Specially formulated to resist degradation by elements normally encountered in soil. All printing is encased to avoid ink rub-off.

NSI S22-8N 22-18 AWG NYLON IN

Cable Tie, UV-Black, 8 Inch, 50 Pound, 100 Pack

Category: Non-Releasable Cable Ties

Jumper Grounding Strap with Single Flexible Braid 330 AMP - 24in. Flexible braid jumper grounding straps are recommended for motion due to expansion, contraction, vibration and operational movement of current carrying members. Manufactured from flat, extra-flexible tinned braid, they are available in a wide variety of sizes and amperages. The ferrules are made from pure electrolytic copper and are tin-plated. Standard mounting holes are 9/16" NEMA spaded holes.

NSI CD16 U-TYPE DIE 350CU RED

Heavy Duty Bronze Ground Clamp with Adapters for 0.5-1in. Pipe and 0.5 in. Rigid Conduit Heavy Duty Bronze Clamps are used to connect grounding conductor to rigid conductor on water pipes.

Jumper Grounding Strap with Single Flexible Braid 190 AMP - 12in. Flexible braid jumper grounding straps are recommended for motion due to expansion, contraction, vibration and operational movement of current carrying members. Manufactured from flat, extra-flexible tinned braid, they are available in a wide variety of sizes and amperages. The ferrules are made from pure electrolytic copper and are tin-plated. Standard mounting holes are 9/16" NEMA spaded holes.

NSI R12-50 "12-10 AWG BARE RI 12 GUAGE RING TERMINAL 1/2 INCH RING UNINSULATED SOLD IN PACKS OF 40

Uninsulated Male Female Adapters Stud Size 0.250 - 15 Count Uninsulated Male Female Adapters have a similar tongue style to a spade. Block spades have longer, flatter sides designed for use in terminal blocks. Electro tin plated copper with brazed seam, easy-entry Nylon. 600V, 105 degress C. FEATURES: STYLE: Male Female Adapter MATERIAL: Tin Plated Copper QUANTITY: 15 Count STUD SIZE: .250 x .032 BRAND EQUIVALENT: Ideal 83-9801

1 Hole Long Barrel Copper Compression Lug 750 MCM - 5/8" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Heavy Duty Silicon Bronze Ground Rod Clamp for 3/4in. Rod Heavy Duty Ground Rod Clamps are made from silicon bronze for maximum strength. A silicon bronze screw furnishes maximum clamping force. All standard duty and heavy duty ground clamps are UL Listed for direct burial in earth or concrete.

Caution Buried Electric Line Below - Detectable Tape - 6" x 1000' Yellow Consists of a minimum 5 mil overall thickness with no less than a 35 gauge solid aluminum foil core, which allows for easy detection of underground utilities. Specially formulated to resist degradation by elements normally encountered in soil. All printing is encased to avoid ink rub-off.

6 Wire Polaris 1/0-14 AWG Uninsulated Multi-Cable Connector Blocks Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

6 Wire Polaris 4-14 AWG Uninsulated Multi-Cable Connector Polaris Uninsulated Multi-Cable Connectors are made from 6061-T6 aluminum alloy and are plated for corrosion resistance. They are stacked in one hole increments, up to 14 holes and are suitable for use on wire from #4 AWG to 750 MCM. UL Listed 486B Wire Connector. AL9CU. Rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Heavy Duty Bronze Ground Clamp with Adapters for 0.5-1in. Pipe and 0.75 in. Rigid Conduit Heavy Duty Bronze Clamps are used to connect grounding conductor to rigid conductor on water pipes.

Bronze Ground Clamp with 360 Degree Adapters for Rigid Conduit .50-1 in pipe 1" Hub Bronze water pipe clamps with bronze adapters provide excellent quality yet are economical. All adapters are interchangeable. Assembled with zinc-plated steel screws. Hub swings 360 degrees for easy alignment. Used to connect rigid conduit and ground conductor to water pipe. UL Listed 467 Grounding and Bonding.

12-10 AWG Vinyl Insulated Female Disconnect with 0.250 Stud - 15 Count Vinyl Insulated Female Disconnects are entirely covered in an insulating vinyl. Turned up edges give this spade more safety and reliability. 300V, 105 degrees C. FEATURES: STYLE: Female Disconnect MATERIAL: Vinyl QUANTITY: 15 Count WIRE SIZE: 12-10 STUD SIZE: 0.250 BRAND EQUIVALENT: Morris 01332 Ideal 83-9601 Ilsco 45120-B10

Bronze Ground Clamp with 360 Degree Adapters for Rigid Conduit .50-1 in pipe 3/4" Hub Bronze water pipe clamps with bronze adapters provide excellent quality yet are economical. All adapters are interchangeable. Assembled with zinc-plated steel screws. Hub swings 360 degrees for easy alignment. Used to connect rigid conduit and ground conductor to water pipe. UL Listed 467 Grounding and Bonding.

Consists of a minimum 5 mil overall thickness with no less than a 35 gauge solid aluminum foil core, which allows for easy detection of underground utilities. Specially formulated to resist degradation by elements normally encountered in soil. All printing is encased to avoid ink rub-off.

Jumper Grounding Strap with Single Flexible Braid 330 AMP - 12in. Flexible braid jumper grounding straps are recommended for motion due to expansion, contraction, vibration and operational movement of current carrying members. Manufactured from flat, extra-flexible tinned braid, they are available in a wide variety of sizes and amperages. The ferrules are made from pure electrolytic copper and are tin-plated. Standard mounting holes are 9/16" NEMA spaded holes.

NSI CD10 U-TYPE DIE 3/0CU ORA

3 Port Panelboard Lug 1000 MCM - 500 MCM Panelboard style for multi-conductor with NEMA mounting hole spacing for turn prevent and secureness. Made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. For use with copper or aluminum conductors. Rated 600 volts (2000V max per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.750".

NSI SSCT-5 STAINLESS STEEL CA

General Purpose Cable Tie, Natural, 7 Inch, 50 Pound, 100 Pack

Category: Non-Releasable Cable Ties