"xcsal2gru-bk co"

WMD EHWB8-BK 8-GANG RECESSED

Category: Hinge Cover NEMA 1 Junction Boxes

Used to upgrade existing installations of RC7 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes 20A duplex receptacle that can be wired as a standard duplex or isolated ground, and two Category 6 TechChoice discrete keystone connectors. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), and brushed metal finishes in aluminum (AL), and brass (BS). Kit also includes duplex receptacle barrier. Old barrier must be replaced with new. See installation instructions with retrofit kit for complete installation details. Black

Category: Assembled Poke-Through Units

WMD 5507MAAP-BK 5507 PLATE WI

Category: 1-Gang Raceway Box Covers & Faceplates

OUTDR CS ACCENT 2G RR1 BK

Category: Unmetered Temporary Power Outlets

881 AV FLR BOX CVR BK FLANGE BK CTR

Steel, Blank End Fitting, 2400 Series. Size: 1-3/16". Black.

Category: Small 2-Piece Metallic Raceway End Fittings

Prewired 15A quad receptacle can be wired as standard quad receptacle or isolated ground. Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). RC9 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC9 Assembled Unit-Brass Flange and Black Slide Holder, 15A Quad Receptacle Standard or IG Finish - Brass

Category: Assembled Poke-Through Units

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two 10ATCPB plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

Non-Metallic, 2A, Single Unloaded Systimax Module. Black.

Category: Keystone Modules For Metallic Raceway

Wlk Rc3ctcbs Bs Fl & Bk Cv 20

Category: Assembled Poke-Through Units

EXTER BX CVR ASSY 2 CIR 20A DUP BK

Category: Temporary Power Distribution Boxes

WMD XCSPP2GRR-BK OUTDR CS POW

WMD XPP2G30D-BK

WMD XPPDBW1G16C-BK POWER PEDE

Seam Clip Fitting, DS4000 Series, Steel, Black, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, 6A, Mini Adapter Bezel Opening. Black.

Category: 1-Gang Raceway Box Extension Adapters

Wmd Rc4ctcbs Bs Fl & Bk Cv 20

Category: Poke-Through Cover Assemblies

Non-Metallic, 2A, SVGA Module. Size: 0.57" x 0.76". Black.

Category: Keystone Modules For Metallic Raceway

Non-Metallic, Duplex Receptacle Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, Black.

Category: 1-Gang Raceway Box Covers & Faceplates

RC4 SLIDE HOLDER BK

Category: Poke-Through Cover Assemblies

All communication device accepts up to four UTP connectors. Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

10IN PREWIRED RECESSED PT BK

Category: Assembled Recessed Round Boxes

AV3 SLIDE HOLDER BK

Category: Poke-Through Cover Assemblies