"it-4"

NSI SP4 4 AWG SET SCREW PLUG

Category: PVC Plugs

NSI ISE169 4/0 - 4/0 STR INSU

Category: Standard Barrel Aluminum Compression Sleeves

NSI CTH-44 COPPER C TAP 6 SOL

Category: C-Tap Press-On Lugs

Ring Terminal, Nylon Insulated, 16 - 14 AWG, Stud Size: 1/4, Color: Blue, Package of 100 Each.

Category: Nylon Insulated Ring Tongues

GROUND CLAMP 1 1/4-2IN DB RATED

Category: Bare Wire Ground Clamps

Nsi 4tc 4-14 Cu Lug

Category: 1-Conductor Copper Mechanical Lugs

Copper Terminal Lug 1/0 - 4 AWG Copper Terminal Lugs are made of high copper alloy. They are used for joining a wide range of cables or terminal blocks.

Category: 1-Conductor Copper Mechanical Lugs

Ring Terminal, Nylon Insulated, 6 AWG, Stud Size: 1/4, Color: Blue, Package of 15 Each.

Category: Nylon Insulated Ring Tongues

NSI IPLD500-3B 500 MCM - 4 AW

Category: Dual Sided Entry Wire Connector Blocks

NSI IPLG3/0-3B 3/0-4 AWG ( BC

Category: Single Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 3, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

500 Mcm - 4/0 Awg Copper Terminal Lug W/ (1) 1/2" Mtg Hole

Category: 3-Conductor Aluminum Mechanical Lugs

Dual Rated Aluminum Splice 4/0 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.

Category: Standard Barrel Aluminum Compression Sleeves

Dual Rated Aluminum Splice 4 AWG Dual Rated Aluminum Splices are a type of aluminum compression connector that is produced from high conductivity aluminum tubing. Center stop assures proper cable installation. Electro-tin plated for corrosion resistance. Color coded and marked with die index information. Pre-filled with oxide inhibitor and capped with color coded cap.

Category: Standard Barrel Aluminum Compression Sleeves

Solid Pin Terminal for Copper and Aluminum Conductors 4/0 AWG All-aluminum Pin Terminals is designed for termination of both aluminum and copper conductors. The solid pin is made of aluminum and is tin-plated and pre-filled with oxide inhibitor. A cover is provided for quick installation. Rated 600 Volts.

Category: Aluminum Pigtail Adapters

NSI G-42 3/4 CONDUIT HUB

Category: Ground Clamps With Hub

NSI AL4-38 4 AWG ALUM COMPRES

Category: 1-Hole Aluminum Compression Lugs

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 4 AWG - 5/16" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

Heavy Duty 1 Cable Parallel Ground Connector for 1in 2/0-4 AWG. Pipe Made of high-copper-content alloy for grounding to 1/2" - 1" ground rods and ground pipes from 1/4" - 3 1/2" in parallel or 90 degree position. Suitable for direct burial in earth and concrete. Nuts and lockwashers are silicon bronze.

NSI L414P #4 AWG MAX WIRE SIZ

NSI HWHS6-40-6 6-4/0 AWG HEAV

Category: Heavy Wall Heat Shrink

12 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

TORK 5441A 4 CONTACTORS 40AM

Category: Time Switch Enclosures

1 Port Aluminum Lug 500 MCM - 4 AWG Aluminum Single Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Temperature Rating 90 degrees C. Rated 600 volts (2000V max. per UL486B). UL 486A/B Listed. .

Category: 1-Conductor Aluminum Mechanical Lugs