"fcbl-mmsclc-1m etherwan systems, inc"

SVT HST-DIRECTOR-00

5-Pin 7/8"-16 UN Female Receptacle, Rated Voltage: 600 Volts, Current: 9 Amps, IP67/IP68/IP69/IP69K, Cable Length: 1 Meter

Category: 5-Pin Cordsets

20V MAX* XR® Brushless Cordless 1/2 in. Hammer Drill/Driver, 2 Speeds: 0-650 / 0-2,000 RPM, Adjustable 3-Position, 3 Mode LED, 2.95 lbs, Includes (1) Belt Clip ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Drill Drivers

Kle 803-16 16-oz Ball Peen hammer

Category: Electrician's Hammers

20V Max 1/4" 3-Speed Cordless Impact Driver Kit (2.0Ah), RPM: 0 - 1000, 0 - 2800, 0 - 3250, BPM: 0 - 8500/0 - 29000, Max Power: 400 Unit Watts Out, Voltage: 20V, Chuck: 1/4" Single Sleeve, Includes: (1) DCF887 - Brushless 20V MAX* 1/4 in. 3-Speed Impact Driver, (2) DCB203 - 20V MAX* Batteries (2.0 Ah), (1) Charger (1) Belt Clip & Kit Box *** Discontinued ***

Category: Cordless Heavy Duty Impact Chucks

Wire Stripper/Cutter, Capacity: 8-16 AWG Solid, 10-18 AWG Stranded, Screw Shearing: 6-32, 8-32, Length: 7-1/8".

Category: Combination Wire Stripper / Cutter Tools

Replacement Blades for Large Cable Strippers, Replacement Blades Effectively Remove Insulation On MTW, THHN And THWN-2 Cable, For Use With Klein's Large Cable Strippers (Cat. Nos. 21050 And 21051 Purchased After October, 2020), Cable Sizes Range From 250 MCM - 2/0 And 350 - 750 MCM, Works With CME Wire And Cable, Inc., Encore Wire Corporation, United Copper Industries And Southwire Company, LLC Cable Manufacturers (Cable Strippers Sold Separately)

Category: Wire Strippers

Self-Adhesive Mat System, Heated Floor Mat, Heated Area: 16 - 19 Square Feet, 240 Volt

Category: 240V Floor Warming Mats

1-1/4 Inch Liquidtight Steel Flex, Splash-Zone, Steel Core, PVC Jacket, Gray, 50 Foot Coil

Category: Liquidtight Flexible Metallic Conduit

Pipe Heating System, Thermostatically Controlled Valve, For Use With: Easy Heat Freeze Free Cables.

Category: Heat Cable Thermostat Outlets

Energi Savr Node 120-277V (Softswitch). Four Occupancy Sensor Inputs for Automated Control of Lights in 4 Zones.

Category: Radio Frequency Area Lighting Controllers

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90º Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with a brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE:

Category: Poke-Through Cover Assemblies

POWR Busbar Series - Power Distribution System, Fuse Holder Accessories BUSBAR 3 PHASE 57 Pole 18MM

Category: DIN Rail Adapters

For AC8850 Box. Includes one (1) Wiremold CM Series Open System adapter. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

LUTRON QSM2-4W-J

Category: Radio Frequency Area Lighting Controllers

Plasti-Bond GUA series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers as standard. Inquire about special covers to allow use to mount lighting fixtures or as sealing fittings. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Explosion-Proof GUAC Conduit Outlet Boxes

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

Plasti-Bond GUA series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers as standard. Inquire about special covers to allow use to mount lighting fixtures or as sealing fittings. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Explosion-Proof GUAC Conduit Outlet Boxes

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

Plasti-Bond GUA series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers as standard. Inquire about special covers to allow use to mount lighting fixtures or as sealing fittings. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Explosion-Proof GUAL Conduit Outlet Boxes

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type TB Conduit Bodies

Category 5e system kit includes one 100-pair base with legs, twenty 5-pair connecting blocks, two label and label holders.

Category: Category 5e Patch Cords