"arw_g_18 dallas print factory, llc"

1 KVA, 1-Phase, 220 X 440 Primary Volts - 110/115/120 Secondary Volts AE Series Industrial Control Transformer, Factory Installed, 3-Pole Primary and Secondary Fuse Blocks

Category: 1 - 1.6 KVA Industrial Control Transformers

42.5 Cu. In. Three gang electrical box for use with nonmeatllic sheathed cable - Machine tapped device holes, rigid hard box construction, no distortion with high temperatures, shatter resistant with low temperatures - Old work residential construction 2 HR fire resistive walls - Fiberglass reinforced polyester - thermoset box - Size: D=2 7/8", W=5 15/16", H=3 1/4" - Mount with Metal wing brackets/metal ears wall compression - Three metal wire clamps factory installed

Category: Non-Metallic Old Work Switch / Outlet Boxes

nLight® Cellular and Ethernet Router for Remote Access, Provides Factory Experts The Ability To Remotely Configure Device Settings, Adjust Time Schedules, And Perform Diagnostic Checks, US and Mexico SIM, 12’ SMA Cable For Remote Antenna Mounting, Includes Low Voltage Relay

Category: WiFi Area Lighting Controllers

46.0 Cu. In. Three gang electrical box for use with nonmeatllic sheathed cable - Machine tapped device holes, leveling ribs, rigid hard box construction, no distortion with high temperatures, shatter resistant with low temperatures - New work residential construction stud face mounted 2 HR fire resistive walls - Fiberglass reinforced polyester - thermoset box with galvanized steel bracket - Size: D=3", W=5 11/16", H=3 3/4" - Mount with Stud mount "Z" hanger bracket both sides with 1/2" offset - Speed KlampsÖ factory installed

Category: Non-Metallic Switch / Outlet Boxes With Brackets

CDY CAT64HPSFM4 4IN J-HOOK TR

Category: J-Hook From Wire/Rod & Beam

200 VA, 1-Phase, 208/277 Primary Volts - 120V Secondary Volts. MTE Series Industrial Control Transformer, 55 Degree C, Copper Magnet Wire, 50/60 Hz operation. Includes: Factory-Mounted 2-Pole Primary Fuse Block For Rejection Type Fuses On Secondary Side For 13/32 x 1-1/2" Fuses.

Category: 130 - 300 VA Industrial Control Transformers

500 VA, 1-Phase, 220 X 440 Primary Volts - 110/115/120 Secondary Volts AE Series Industrial Control Transformer, Factory Installed, 3-Pole Primary and Secondary Fuse Blocks

Category: 500 - 800 VA Industrial Control Transformers

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 83C2570

Category: 15 KVA Dry Type Transformers

Breaker, Molded Case, 600 Amp, 600 Volt AC, 22 kAIC, 2-Pole, J Frame, Thermal Magnetic, Line/Load Lugs, Factory Assembled

Category: 600V Rated Molded Case Circuit Breakers

Dimmable LED Lamp, 4.5W, 120V, Bulb: G25 (Globe), Base: Medium Screw (E26), Lumens: 420, CRI: 80, Color Temperature: 2700K, Lamp Finish: Frosted, Factory Warranty Period: 3 Years, Rated for 15,000 Life Hours, Standard Package QTY: 4 *Sylvania # 75317*

Category: Globe Decorative LED Lamps

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 83B2672

Category: 33 - 37.5 KVA Dry Type Transformers

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 83C2572

Category: 33 - 37.5 KVA Dry Type Transformers

CORROSION PROTECTION TAPE 2IN X100FT

Category: All Weather Corrosion Protection Tape

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 degree centrigrade insulation system.-Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or aluminum windings-Copper ground strap-Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100 percentage factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise.-Clear, comprehensive documentation and labeling 83B2671

Category: 20 - 25 KVA Dry Type Transformers

GE Type QL transformers meet NEMA TP-1 efficiency standards. They are available with aluminum or copper windings and utilize a UL recognized 220 C insulation system. Quiet Performance-Core and coil assemblies are mounted on rubber isolation pads to reduce noise-Bolted coil terminations-Single-piece front/back is easily removable for service-NEMA 2 drip-proof enclosure is standard, weathershield kits are available for conversion to NEMA 3R outdoor configuration-Qualified to the seismic requirements of IEEE-693-2005 and IBC-2006-Copper or a luminu m windings-C opper gr ound strap- Robust packaging with top and side protection protects against shipping damage-Accessible mounting flanges with front/back slotted mounting holes make installation easier-100PERC factory tested for shorts and coil integrity, current and loss, voltage, impedance and noise. Clear, comprehensive documentation and labeling 83B3882

Category: 30 KVA Dry Type Transformers

Record Plus represents the very latest in molded case circuit breaker design. Utilizing design features such as double-break rotary contact structures and advanced ablative materials to enhance interruption, Record Plus is capable of interrupting ratings up to 200kA (FC max is 150kA). High kAIC ratings, selective coordination, reduced arc flash energy, and current limitation embody the core design principles of Record Plus. FC 100 circuit breakers are supplied with factory installed non-user interchangeable thermal-magnetic trip units and c an be suppli ed with or wi thout lugs. FC is available in 2- and 3-pole versions, both in a 3-pole footprint. Record Plus product numbers ending in R or R0 do not include lugs. An R1 suffix indicates that the breaker is supplied with line and load lugs, R2 indicates load lugs, and R3 indicates line lugs. RV suffixed product numbers include load lugs and line connections specifically designed for General Electric type AD panels. All frames use common internal accessories (auxiliary switches, UV releases, shunt trips, and bell alarms) UL listed for field installation. UL listed maximum short circuit ratings at 480VAC are 150kA for the 100A frames and 200kA for the 600A frames. Unless noted otherwise, all circuit breakers and accessories are listed in UL file number E11592.

Category: Molded Case Circuit Breaker Frames

2X4 LED EDGE LIT PANELW/EMERG BALLAST FACTORY INSTALLED

B6ICLED650LDIMTR12030K90AT

GENERAL CABLE 14/4 FREP UNSHD

BRN 97009745 REPLACEMENT FAN MOTOR AND BLOW WHEEL

Southwire Armorlite Type MC Cable is constructed with soft-drawn copper Type THHN/THWN-2 conductors rated 90°C dry and a bare copper grounding conductor for sizes 1/0 AWG and larger. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. Also available in steel. Conductors are black with phase identification. Colors available upon request with economic order quantity.

LLC CE8BES 8BTN CONTR STN MEM

#3AWG/4CON W/GRND ALUM MC FEE

HOL ATBM H MVOLT R4 5K BZ AO PCLL