"arw_g_18 dallas print factory, llc"

CRO DSD951 DSD COVER AND DEVI

Category: Explosion-Proof Pilot Device Covers

Main breaker load centers arrive with a main breaker installed for a convenient and swift install. Main breakers allow for the user to stop the flow of electricity in the load center, shutting off all the power in the residence. The TM815RCUFL features spaces for 8, 1" breakers, a 150A main ampere rating, a copper bus, factory installed feed-through lugs, and an outdoor suitable enclosure.

Category: 1-Phase Main Breaker Copper Bus Load Centers

Breaker, Molded Case, 600 Amp, 600 Volt AC, 22 kAIC, 3-Pole, J Frame, Thermal Magnetic, Line/Load Lugs, Factory Assembled

Category: 600V Rated Molded Case Circuit Breakers

Load Center, Generator Panel, 2 Interlocked Main Breakers Factory Installed, 60 Amp, 120/240 Volt AC, 1-Phase, 4 Space, 8 Circuit, TGK12 Ground Bar Included, NEMA 1, Surface

Category: 1-Phase Main Breaker Copper Bus Load Centers

LED Troffer, 2 x 4, 40 Watt, Adjustable CCT Factory Set at 4000K, Adjustable in 500K Increments, Smartcast Technology

Category: LED - Troffers

IUH SERIES INDUSTRIAL UNIT HEATER UH548 - 5000W 480V, 1/3 Phase. All motors and contactor coils are 240V and operate on the secondary of a factory-installed step-down power transformer on 480V and 600V heaters so a separate fan and motor control power source is not needed

Category: Industrial Unit Heaters

CRO EDSC2162 EDS FS PUSH BITT

Category: Explosion-Proof Assembled Switches

Broan® Project Finish Kit, Factory wired at 500W, at 240V AC, it can be easily converted to 500W at 120V AC, w/ Built-In Thermostat, White grill. Finish kits are sold in single-pack quantities and are used in conjunction with a 171H Rough-In Housing Kit - sold separately.

Category: All Area Fan Forced Heaters

CADDY CAT HP J-HOOK WITH BC BE

Category: J-Hook From Wire/Rod & Beam

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

CDY CAT21HPBC26 CAT HP

Category: J-Hook From Wire/Rod & Beam

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 7.5W (30- 130VDC) for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 Field or factory installation (Indoor/Damp).

Category: LED Driver Emergency Power Supplies

Series C NEMA M-frame Molded Case Circuit Breaker, Type Mdlb, Cable In/cable Out, 3-pole, 800 Amp, 600 Vac, 250 Vdc, Fixed Thermal-magnetic Trip, Factory Sealed

Category: 600V Rated Molded Case Circuit Breakers

Series C NEMA M-frame Molded Case Circuit Breaker, Type Mdlb, Cable In/cable Out, 3-pole, 600 Amp, 600 Vac, 250 Vdc, Fixed Thermal-magnetic Trip, Factory Sealed

Category: 600V Rated Molded Case Circuit Breakers

Pushbutton Station, Division 1, Explosion Proof, Rain Tight, Water Tight, 600 VAC, 10 Ampere, 2 Element, 2 Circuits, Single Gang Box, NEMA Rating: 3/4X/7CD/12

Category: 2-Element Control Stations

CDY CAT32HPBC26 CAT HP

Category: J-Hook From Wire/Rod & Beam

350 DURASHEATH BLK 600V XLF 350KCMIL 1/C 37/W COATED SOFT COPPER .065"EP .065"XL- CPE CLF TYPE USE-2 RHH OR RHW-2 600 VOLTS W/SEQUENTIAL PRINT NOMINAL O.D. .938 GENERAL CABLE SPEC 5050 GENERAL CABLE PN 14511.716205

Light Commercial Kilowatt Hour Meter, 3-Phase, 120-277 Volt Auto-Ranging Power Supply Suitable for Both 277/480V, 4W, WYE and 240/480V 4-Wire Delta Services, 7 Jaw. Active Energy and Digital Multiplication Measurement, Non-Volatile Memory, 9-Digit LCD, Display Scroll Sequence Programmable (Factory or End User)., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Watt Hour Meters

1 s to 1023 s Time Delay & Timing Relays Timing Module

Category: DIN Rail Mount Timing Relays