"ps-36vdc gem electronics"

Siac-Ps 3G Signal Isolator With Power Supply

Category: Variable Frequency Drive Signal Isolators

Channel Nut W/O spring, Thread Diameter: 1/4", Material: Steel, Finish: Electro-Galvanized. For Use with: PS 100, PS 150, PS 200, PS 210 and PS 300 Channel. *Can be used with PS 400, PS 500, PS 520 and PS 560 Channel.

Category: Strut Channel Nuts

Deep Strut, Elongated Holes on Back, 1-5/8" Height, 1-5/8" Width, Pre-Galvanized Steel, 12 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

Shallow Strut, Elongated Holes On Back, 13/16" Height, 1-5/8" Width, Pre-Galvanized Steel, 14 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

Diva Series Decorator Dimmer, Controls 150W Dimmable LED , 600W Incandescent, Or Halogen Loads, Paddle Turns On/Off, Slide Up To Brighten, Down To Dim, Provides Reliable Dimming Of Dimmable LEDs, As Well As Halogens And Incandescents, Single-Pole/3-Way, White (Wallplate Sold Separately)

Category: Universal Dimmers - Decorator

All Threaded Rod, Zinc-Plated, 3/8-16 Thread x 10 Foot Length, 10 Feet = 1 Stick, Box Quantity: 250'

Category: Threaded Rod

3" x 2", 1-Gang, Gangable, Switch Box with Plaster Ears & Armored Cable/Metal Clad/Flex Clamps, Drawn, Metallic. Depth: 2-1/2". Side Knockouts: (4) Priouts. Bottom Knockouts: (1) 1/2". Cubic Inches: 12.5".

Category: Metallic Switch / Outlet Boxes

3" x 2", 1-Gang, Gangable with Ac/mc/flex Clamps, Switch Box with Plaster Ears & Cable Clamps, Drawn, Metallic. Depth: 3-1/2". Side Knockouts: (7) 1/2" & (4) Priouts. Bottom Knockouts: (1) 1/2". Cubic Inches: 18.0".

Category: Metallic Switch / Outlet Boxes

Lutron Caseta Wireless Wallplate Bracket for Pico Smart Remote, Replaces Existing Switch To Create A 3-Way Application For Your Caseta Dimmer Or Switch; No Wiring Required, Bracket Only, Additional Accessories Sold Separately

Category: Wireless Dimmers & Switches

Electronics Pocket Screwdriver 4-In-1

Category: Multi-Bit Screwdrivers

Precision Screwdrivers Feature Rotating Caps For Optimum And Precise Control, Screwdriver Set Has Color Coded Rings And Hot Stamped Cap Markings For Quick Identification, Set Contains Phillips #00, #0 (Cat. Nos 6222, 6233); Slotted 3/32-Inch (2.5 Mm), 1/8-Inch (3 Mm) (Cat. Nos. 6243, 6254); Tamperproof Torx® T6H, T8H, T10H And T15H (Cat. Nos. 6303, 6313, 6323, 6333), Cushion-Grip™ Handles For Maximum Comfort When Working On Small Equipment, Over-Sized Cap Markings For Quick Identification Of Tip Size, Heat Treated And Precision-Machined Tips For Greater Strength, Compatible With Terminal Blocks, Electronics, Small Home Appliances, Security Systems, Small Electronics And More, Torx® Is A Registered Trademark Of Acument Intellectual Properties, LLC

Category: Screwdriver Sets

Channel Safety End Cap, For Use With PS 200 Series Channel, Plastic

Category: Strut Channel Safety End Caps

PS 601: Two Hole Splice Plate , PS 601 EG

Category: Flat Plate Strut Channel Connectors

PS 619: Square Washer , PS 619 3/8 ZD

Category: Strut Channel Washers

Beam Clamp, U Bolt, Strut Clamp, 3-3/8 Wide, Steel, Electra-Galvanized, Use w/ PS 200, PS 210, 300, 400, 500, 520

Category: Strut-to-Beam Clamps

Switch Box With Plaster Ears, Drawn, Metallic, Gangable, Size 3 x2 Inch, Depth 3-1/2 Inch, Side Knockouts (8) 1/2 Inch, Bottom Knockouts (1) 1/2 Inch, Cubic Inches 18 Inch

Category: Metallic Switch / Outlet Boxes

Standard Strut Strap, Diameter: 2-1/2", Material: Steel, Finish: Electro-Galvanized, Thickness .105". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps

4-in-1 Electronics Screwdriver, Overall Length: 6.5", Blade Length: 2.8", Type: Multi-bit, Rotating Cap For Optimum Control

Category: Multi-Bit Screwdrivers

PS 793: Four Hole Closed Angle Connector , PS 793 45 DEG EG

Category: Closed Angle Strut Channel Connectors

Splice Clevis, 4 Holes, Hole Diameter: 9/16 in, Material: Steel, Finish: Electro-Galvanized, Length: 7-1/4" Width: 1-5/8", Compatible With: PS 200 & PS 210.

Category: Strut Channel Joiners

PS 602: Three Hole Splice Plate , PS 602 EG

Category: Flat Plate Strut Channel Connectors

PS NS: Clamping Nut With Out Spring: Use With l 1 5/8 In. Wide Channel , PS NS 3/8 HG

Category: Strut Channel Nuts

Channel Nut W/ long spring, Thread Diameter: 3/8", Material: Steel, Finish: Electro-Galvanized. For Use w/ PS 200, 210, 300.

Category: Strut Channel Spring Nuts

Standard Strut Strap, Diameter: 1-1/2", Material: Steel, Finish: Electro-Galvanized, Thickness .105". For use with: GRC, IMC, SCH 40/SCH 80 Conduit.

Category: Strut Channel Rigid Conduit Clamps