Search results

Fuse, Tri-Onic®, 600 Volt AC, 300 Volt DC, 100 Amp, Time-Delay, Class RK5, TRS Series  

Category: Class RK5 Power Fuses

TYPE EJO-1 FUS FUSE UNIT NON EXPULSION 15KV 30 E SIZE D (3") TYPE EJO-1 5 0000 AMPERES RMS INTERRUPTING

Category: E-Rated Fuses

Fuse, Power Distribution, 2E, 15.5 kV, 15 Inch Clip Centers, EJO-1, 120 kAIC

Category: E-Rated Fuses

Mersen DFC dead-front fuse covers snap on to individual fuses installed in fuse blocks, covering exposed live clips and terminals and reducing accidental contact by personnel. They are sized to fit class G, H, J, K, R, CC or midget fuses for increased safety and optional open-fuse indication. All DFC dead-front covers are reusable when a fuse is replaced - simply detach from the open fuse and re-attach to the new replacement fuse. On indicator models an orange indicator light will illuminate to indicate an open fuse 600 Volts 30 amps Class J series.

Category: Fuse Covers

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code«. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories: miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper. 2 wires in 2 wires out 3 poles 620 amps AL Large size.

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Fuse, Amp-Trap 2000®, 600 Volt AC, 500 Volt DC, 900 Amp, Time-Delay, Class L, A4BQ Series

Category: Class L Power Fuses

Power Distribution Block, 100 Kamp Short Circuit Rating, Aluminum Connector, Finger-Safe, Standard: Ul, CSA, Wire Size: 2/0 To 14 AWG, Aluminum/Copper Line Wire, 2 to 14 AWG Aluminum/Copper Load Wire, Amperage Rating: 175A, Size: 1.12 x 2.21 x 3.45 Inch

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Fuse, Amp-Trap®, 600 Volt AC, 300 Volt DC, 10 Amp, Fast-Acting, Class J, A4J Series  

Category: Class J Power Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC/DC, 15 Amp, Time-Delay, Class J, AJT Series, Smart-Spot

Category: Class J Power Fuses

Fuse, Potential Transformer, 0.5 Amp, 15.5 kV, EJ-1, 11.5 Inch, Clip Center, 120 kAIC

Category: Potential Transformer Fuses

Fuse, Class L, 1200 Amp, 600 Volt AC, 300 Volt DC, Time Delay, Current Limiting

Category: Class L Power Fuses

Fuse, Amp-Trap®, 600 Volt AC, 300 Volt DC, 70 Amp, Fast-Acting, Class J, A4J Series  

Category: Class J Power Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC, 500 Volt DC, 400 Amp, Time-Delay, Class L, A4BQ Series

Category: Class L Power Fuses

A70qs100-22f Amp Trap

Category: Semiconductor Fuses

Fuse Holder, 60 Amp, 600 Volt AC/DC, Class J, 3-Pole, Ultrasafe, Blown Fuse Indicators

Category: Class J Finger Safe / Dead Front Fuse Holders

Fuse, Amp-Trap®, 600 Volt AC, 500 Volt DC, 1200 Amp, Time-Delay, Class L, A4BT Series

Category: Class L Power Fuses

Gould 4800v Tfmr Fuse

Category: Potential Transformer Fuses

Fuse, Amp-Trap 2000-«, 600 Volt AC/DC, 3 Amp, Time-Delay, Class CC, ATDR Series

Category: Class CC Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC, 500 Volt DC, 800 Amp, Time-Delay, Class L, A4BQ Series

Category: Class L Power Fuses

250V,Fast Acting Glass 5mm x 20mm 250 Volts 1 Amps GGM series.

Category: Electronic Fast Acting Fuses

Fuse, 5 Amp, 125 Volt AC, Fast Acting, Glass Body, 5 x 20 mm, 200 AIC

Category: Electronic Fast Acting Fuses

Mersen UltraSafe modular fuseholders introduce a new level of safety for class CC fuses up to 30 amperes. UltraSafe fuseholders qualify as "finger safe" under IEC and DIN standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). UltraSafe fuseholders are available in 1, 2, 3 or 4 poles, with or without visual blown-fuse indicators in each pole. Multiple poles can be assembled in the field by ordering and installing pin-tie handles. UltraSafe fuseholders save up to 15 percent mounting space and any combination can be snapped onto 35mm DIN rail for extra savings in panel building time. Choose class CC fuses for Type "2" no-damage protection, one of the safest protection packages in the industry. The UltraSafe body material is tough and durable polyamide, with exceptional insulating properties. 600 Volts 30 amps 1 poles standard indicator .

Category: Class CC Finger Safe / Dead Front Fuse Holders

Fuse, Amp-Trap®, 250 Volt AC/DC, 1 Amp, Fast-Acting, Class K5, OT Series,

Category: Class K Fuses

Fuse, Amp-Trap®, 300 Volt AC, 160 Volt DC, 150 Amp, Fast-Acting, Class T, A3T Series  

Category: Class T Power Fuses