Search results

150V 100A SEMICOND FUSE

Category: Semiconductor Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC/DC, 150 Amp, Time-Delay, Class RK1, A6D Series, Smart-Spot  

Category: Class RK1 Power Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC, 500 Volt DC, 900 Amp, Time-Delay, Class L, A4BQ Series

Category: Class L Power Fuses

Tri-Onic TRM time-delay midget fuses are rated 250VAC and are offered in 36 ampere ratings from 1/10A to 30A. They have 12 seconds time-delay at 200 percent rating to provide supplemental protection of small motors, small transformers and other high inrush loads, plus many other 250 volt applications. (Not for Branch Circuit Protection) 250 Volts 6 amps.

Category: Time Delay Midget Fuses

Fuse Holder, 30 Amp, 600 Volt AC/DC, 3-Pole, UltraSafe, Modular, Class CC, IP20

Category: Class CC Finger Safe / Dead Front Fuse Holders

Gould A70p50-4 700v Rectifier fuse

Category: Semiconductor Fuses

Capacitor Fuse, 600 Volt AC, 100 Amp, Screw-in Mount, A60C Series

Category: Capacitor Fuses

Fuse, 50 Amp, 300 Volt AC, QS Style, Semi-Conductor, Bolt On, Blades

Category: Semiconductor Fuses

Ferraz A70qs20-14f 20a 700v F

Category: Semiconductor Fuses

Ferraz Ack300 79135-fork Truc

Category: Fork Truck Fuses

High Speed Fuse Amp-Trap® A70P 700VAC 650VDC 800A Bolted Blade

Category: Semiconductor Fuses

94642-FUSE,FORM 101

Category: Semiconductor Fuses

Mersen UltraSafe US14 and US22 modular fuseholders offer the highest levels of safety and features for IEC Cylindrical 14x51mm fuses and 22x58mm. Like all UltraSafe fuseholders, they qualify as "finger safe" to an IP20 grade of protection under IEC standards. These fuseholders come standard with a mechanical indicator that indicates fuse presence. If a fuse with a mechanical striker is used, the fuseholders mechanical indicator will also indicate a blown fuse. Microswitches can be supplied with the fuseholders if desired to allow for remote blown fuse indication. These fuseholders also feature padlocking capabilities. 750 Volts 50 Amps 3 pole with indicator series.

Category: Modular Fuse Holders

Fuse, Amp-Trap®, 600 Volt AC, 300 Volt DC, 500 Amp, Fast-Acting, Class T, A6T Series  

Category: Class T Power Fuses

PDF EJO-1 FI 15.5KV 0.5E

Category: E-Rated Fuses

Fuse, 75 Amp, 500 Volt AC/DC, QS Style, Semi-Conductor, Bolt On, Blades

Category: Semiconductor Fuses

Fuse, Amp-Trap®, 300 Volt AC, 160 Volt DC, 1000 Amp, Fast-Acting, Class T, A3T Series  

Category: Class T Power Fuses

Power Distribution Block, Protective Cover, Double Wide, Clear, 1-Pole

Category: Non-Insulated Connector Block Covers

FERRAZ MPDB63163 PDB 3P AL MI

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

One-Time OT and OTN general purpose fuses provide low cost protection for feeder and branch-circuits serving lighting, heating, and other non-motor loads. OT and OTN fuses will safely interrupt available short-circuit currents up to 50,000 amperes in all ratings. OT and OTN fuses are not rejection fuses and care should be taken to ensure that replacement fuses do not have lower interrupting ratings than original fuses. OTN(15-60) satisfy the Canadian electrical code requirement for Type P low melting-point, non-time-delay fuses. 250 Volts 25 amps OT series.

Category: Class K Fuses

Fuse, Amp-Trap®, 600 Volt AC, 300 Volt DC, 450 Amp, Fast-Acting, Class J, A4J Series  

Category: Class J Power Fuses

Ggm1/4 250v 1/4a 5x20m

Category: Electronic Fast Acting Fuses

High Speed Fuse Amp-Trap® A70QS 700VAC 700VDC 60A Bolted Blade

Category: Semiconductor Fuses

Fuse, Amp-Trap 2000®, 600 Volt AC/DC, 10 Amp, Time-Delay, Class RK1, A6D Series, Smart-Spot  

Category: Class RK1 Power Fuses