Search results

Flexible Sleeve, .291 ID, 4 AWG, Tin Plated Copper, 50 Per Pack

Category: Non-Insulated Ferrules

NSI SL300N 300 MCM CU STACKED

Category: 2-Hole Copper Compression Lugs

Buzzer, 8 - 16 Volt AC, 3 - 6 Volt DC, 1 Amp, 88 dB @ 3 ft, Surface Mount, 3 Inch Height x 2-1/2 Inch Width x 1 Inch Depth

Category: Dixie Buzzers

10 Wire Polaris 600 MCM - 6 AWG Insulated Multi-Cable Connector Block, Either Side Wire Entry Polaris Insul-Tap Connectors have wire entry ports on both sides of the connector to allow for access from either side. Eliminates the need for cover and taping. Insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable plugs to close the entry port not being utilized. Abrasion and chemical resistant. UV resistant. Will not support combustion. AL7CU. Cold temperature rated to -45 degrees C, rated 600V, 75 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Single Sided Entry Wire Connector Blocks

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 5, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

2Hole Long Barrel Copper StackedCompression Lug500MCM-1/2" Bolt Long Barrel Copper Stacked Compression Lugs is a type of copper compression connector that is produced from high conductivity copper tubing.They are designed for usewith the L-NSeries. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference.

Category: 2-Hole Copper Compression Lugs

Stranded Bi-Metallic Pin Terminal 750 MCM Stranded Bi-Metallic Pin Terminals is designed to facilitate termination of aluminum conductors. Tin-plated stranded copper pin. Connector bores are coated with oxide inhibitor. Supplied with EPDM insulating cover. UL 486B listed. Rated 600 volts.

Category: Aluminum Pigtail Adapters

TRK TA598 TRANSFORMER 120V EA

Category: Rough-In Boxes with Transformer

Interval Wall Timer, 1 Minute-18 Hour Maximum, 12-150 Watt, 24-277 Volt, SPST, White, Flash Warning Before End of Cycle

Category: In-Wall Programmable Time Switches

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 6, Wire Range: 600 MCM - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Lighting Control Panel, 365 Day, SPDT, 4 Channel, 120-277 Volt, Metal Indoor/Outdoor NEMA 3 Enclosure with Locking Hasp

Category: 365 Day Digital Time Switches

Toggle Switch Bat On/Off/On Dpdt .250 Quickconnect

Category: 2-Pole Toggle Switches

Copper Compression Lug, Conductor Size: 4/0 AWG, 1-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 1-Hole Long Barrel Copper Compression Lugs

NSI IPL3/0-3B 3/0-6 AWG POLAR

Category: Single Sided Entry Wire Connector Blocks

NSI HWHS500-1500-12 500-1500

Category: Heavy Wall Heat Shrink

NSI HTF16-250-3-P 16-14 AWG B

Category: Female Non-Insulated Wire Disconnects

Time Switch, 7 Day, SPDT, 4 Channel, NEMA 1, 20A, 24, 120-277VAC

Category: 7 Day Digital Time Switches

Vinyl Insulated Ring, 16-14 AWG, #10 Stud, 300 Volt, Blue, 100 Per Pack

Category: Vinyl Insulated Ring Tongues

Insulated Multi-Cable Stacked Connector Block, Wire Entry Either Side, 600V, Number of Ports: 4, Wire Range: 3/0 AWG - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Power Distribution Blocks, Connector Blocks Series, Line Side (2) 2/0 - 14 AWG, Load Side (6) 2 - 14 AWG, 350 Amps Per Pole

Category: Double Primary / Multiple Secondary Non-Insulated Distribution Blocks

NSI HWHS500-1500-9 500-1500 M

Category: Heavy Wall Heat Shrink

10 Wire Polaris 500 MCM-4 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Category: Dual Sided Entry Wire Connector Blocks

Bare High Temperature Ring Terminal, 12-10 AWG, #10 Terminal Size, 600 Volt, Nickel Plated Copper, Silver, 60 Piece Pro Pack

Category: High Temperature Ring Tongues

Copper Compression Lug, Conductor Size: 500 MCM, 2-Hole Stud, Long Barrel, Stud Diameter: 1/2".

Category: 2-Hole Long Barrel Copper Compression Lugs