Search results

OZ-Gedney Type RB Reducing Bushing, Size: 2 X 1-1/4 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 7/8 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Group

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type FD Deep Cast Device Box, Number Of Outlet: 1, Copper-Free Aluminum, Size: 3/4 IN, Ridge Top Construction, Cable Entry: (1) 3/4 IN Hub, 28 CU-IN Capacity, No, 2-15/16 IN Width, 3-1/16 IN Depth, 4-11/16 IN Height, Finish: Alumin

Category: 1-Gang Aluminum FS & FD Device Boxes

OZ-Gedney Clip-On 170 Series Cover, 1-1/2 IN Hub, Form: 7, Screw-In Mounting, Stamped Steel Body, Zinc Electroplated Clips, Stainless Steel Screws, Finish: Pre-Galvanized Zinc, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CS

Category: Steel Conduit Body Covers

OZ-Gedney Type RB Reducing Bushing, Size: 2 X 1-1/2 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 7/8 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Group

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type GUAL Conduit Outlet Box, Number Of Outlet: 2, Malleable Iron Body, Copper-Free Aluminum Cover, Size: 1 IN, Cable Entry: (2) 1 IN Hubs, 17 CU-IN Capacity, No, 3 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 3-5/8 IN Width, 2-3/8 IN Depth, 3-5/8 IN Height, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof L Conduit Outlet Boxes

OZG REC-1005S RDC CP IRN 1 TO

Category: Steel Rigid Conduit Couplings

OZ-Gedney Type 14-S Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 1-13/16 IN, 3/8 IN Mounting Hole Width, 1 Holes, 3/8 IN Width, Trade Size: 1-1/2 IN, Dimension A: 3-7/8 IN, Applicable Third Party Standards: Federal Specification FF-

Category: Malleable Iron 1-Hole Conduit Straps

Reducing Washer, 4" x 3-1/2", Steel

Category: Reducing Washers

Reducing Washer, Steel, 1-1/2" x 1"

Category: Reducing Washers

OZG IBC-600 6" INSUL THD BSHG

Category: Threadless Ground Bushings

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3 IN, 4-3/16 IN Outside Diameter, Length: 3-5/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third P

Category: Iron Rigid Conduit Three Piece Couplings

Reducing Washer, 3-1/2" x 3", Steel

Category: Reducing Washers

Liquidtight Grounding Connector, 90°, Insulated, Size: 2-1/2 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

2 IN 45 DEG CONN LFMC W/LUG

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 2-1/2 IN, Connection: Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 4-1/8 IN Width, 3 IN Height, Third Pa

Category: Malleable Iron Liquidtight Flex Connectors

3/8 IN 90 DEG CONN LFMC INSUL

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

1 IN COND NIPPLE INSUL

Category: Iron Chase Nipples

OZ-Gedney Tray-Bond Type CTC Cable Tray Clamp, Trade Size: 1 - 1-1/4 IN, Malleable Iron, U-Bolts And Nuts: Steel, Finish: Mechanically Galvanized, 115 LB-IN Recommended Installation Torque, 5/16-18 UNC U-Bolt And Nut, Dimension W: 2-7/8 IN, Dimen

Category: Conduit To Cable Tray Adapters

Grounding Bushing, 1-1/2 Inch, Threaded, Insulated, 14 to 4 AWG, Material: Malleable Iron, Lug: Bronze, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Hardware, Bushings, Insulating, Trade Size: 2 1/2 Inch, Material: Malleable Iron, Connection Type: Set-screw, Maximum Temperature Rating: 150° C,features: For Rigid And Imc, With Aluminum Lug, Outside Diameter: 3 3/8 Inch, Width: 7/8 Inch, Grounding Wire Size Minimum: 14 Awg

Category: Threadless Ground Bushings

3 IN 45 DEG CONN LFMC INSUL

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

EMT Compression Connector, 1 inch, 90°, Material: Malleable Iron

Category: Malleable Iron EMT Compression Connectors

O-Z/Gedney B-150 Type B Conduit Bushing, 1-1/2 in Trade, Malleable Iron, Zinc Plated

Category: Rigid & IMC Bushings

OZ-Gedney Type C Conduit Body, 1/2 IN Hub, Length: 5 IN, 1-1/4 IN Width, 1-3/8 IN Height, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 4.2 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 00979

Category: Type C Aluminum Conduit Bodies