"en-234-tp ballast"

LED Emergency Driver - Input Voltage: 120-277V AC. Matal Case with Conduit. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 For Field or Factory Installation (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

2 Constant Power Emergency LED Driver, 10 Watts (Constant), 120-277VAC, 50/60Hz, 10-60VDC (Auto-Sense), Ni-Cad Battery

Category: LED Driver Emergency Power Supplies

LED Battery Back Up Emergency Driver, 9 Watt, Input Voltage: 120-277 Volt, Output Voltage: DC120-200V. 250V Max (Emergency Mode: 9W, Constant Power), Discharge time: 90 Minutes, 0-10V Dimming. Indoor Use Only. Halco BBU/EM9WU, 90313.

Category: LED Driver Emergency Power Supplies

IOTA Constant Power Emergency LED Driver: 120-277VAC, 50/60Hz, Output: 10-55VDC Class 2 Compliant, 1.0A (@10VDC) - 0.18A (@55VDC), 10 Watts (constant), 1.4A. Operating Temp: 0° to 55° C, Self-Diagnostic / Self-Testing, Stainless Steel Switch. Acuity/IOTA CI Code: *285C6F

Category: LED Driver Emergency Power Supplies

10 Watt T8/Pin-Based Emergency Battery Back Up Kit, Type B Compatible

Category: LED Driver Emergency Power Supplies

Sure-Lites Constant Power LED Emergency Battery Pack, 14 Watts, 120-277V, LiFePO

Category: LED Driver Emergency Power Supplies

M4 Field Installable 40 Watt Emergency Battery Pack (Not For Use With Any Sensor Option)

Category: LED Driver Emergency Power Supplies

Remote Field installable 10W Emergency driver kit: Use for FluxPanel SBP: Selectable LED flat panel / FluxPanel FPZ: FluxPanel Gen2 LED flat panel / NWL Wraparound LED / SDS LED Selectable Strip. Construction/Finish: Bodine BSL310C2WM; Die formed .0625” galvanized steel J box and J box cover, which includes both ¾” and ½” knockouts; ½" Chase nipple and nut; Die formed .0625” galvanized steel J box mounting bracket; Two-wire illuminated test switch (2W-ITS) and wall plate.

Category: LED Driver Emergency Power Supplies

High-Efficiency Constant Power Emergency LED Driver, 120-277VAC, 50/60Hz 10-60VDC (Auto-Sense), 10 Watts (Constant), Ni-Cad Battery

Category: LED Driver Emergency Power Supplies

LED Reduced-Profile Emergency Driver Field Install Kit

Category: LED Driver Emergency Power Supplies

LED Emergency Driver, 6 Watt, 120-277 Volt Input, 15-54 Volt DC Output

Category: LED Driver Emergency Power Supplies

IOTA Emergency LED Driver, Constant Power Performance At 10 Watt, Integral Non-Flex, 90-Minute Emergency Operation

Category: LED Driver Emergency Power Supplies

Constant Power Emergency Driver, 15W, 120-277V, Low-Profile Linear, Length: 22”, Width: 1.18”, Height: 1.18”

Category: LED Driver Emergency Power Supplies

LED Emergency Driver. Input Voltage: 120/277 Volts AC, 60Hz. Output Voltage: 120/277 VAC, 60Hz. Maximum Load Power (including AC ballast/driver): 100 Watts. SINE WAVE Emergency Lighting inverter with Dimming Capabilities

Category: LED Driver Emergency Power Supplies

10 Watt Emergency LED Driver, Class 2 Output, Very Compact Low Profile Case, ABConnect and STSelect Equipped, Metal IP65 Bi-Color LED and Test Switch, 14.1” x 1.18” x 1"

Category: LED Driver Emergency Power Supplies

LED Battery Pack, 14 Watt, 120-277V, Steel Housing ***Discontinued, See Sub***

Category: LED Driver Emergency Power Supplies

LED Battery Pack, 7 Watt, 120-277V, Steel Housing, 10.06"

Category: LED Driver Emergency Power Supplies

Constant Power Self-Diagnostic Emergency LED Driver: 120-277VAC Input, 20 Watt Constant Power at a rated output voltage of 20V-60VDC, Class 2 Compliant, High Efficiency for CA Title 20, Self Test / Self Diagnostic, Single Flex, Galvanized Steel Case.

Category: LED Driver Emergency Power Supplies

Emergency Battery Backup For LEDBARKITS: Input Voltage: 120-277VAC, 50/60Hz, Output Power: 25 Watts, Dimensions: L 17.14” x W 2.13” x H 1.57”, Dual Flex Leads

Category: LED Driver Emergency Power Supplies

20 Watt Emergency Battery Backup, 120-277V, Provides 90 Minutes Of Emergency Light During Power Loss, Compatible With Fixtures Up To 200 Watts, Manual Testing Via Remote Control (Optional), Indicator Module Mounting Compatibility With Grid Ceiling, Drywall, Or Open Ceiling Applications, ETL Approved For Damp Locations

Category: LED Driver Emergency Power Supplies

Emergency Lighting Control Device for Generator or Central Inverter Supplied Lighting (Generator Transfer Device): 280 mA, 120/277 Volt AC, 1.6 Watt. For Fluorescent or LED Lighting. 12NC 913710834802. AKA: PET00001M.

Category: LED Driver Emergency Power Supplies

40W Emergency Driver, Remote Mount, 120-347V White w/ Remote Included

Category: LED Driver Emergency Power Supplies

6 WATT 90 MINUTE 100-277 VOLT LED EMERGENCY BACKUP DRIVER FOR USE WITH 4/6/8 OR 10 INCH CDL

Category: LED Driver Emergency Power Supplies