Search results

Terminal Shroud for Compression Lugs. For use with PSTB570 - 1050 & PSTX570 - 1050 Series Softstarters and AF580 - AF1250 Series Contactors.

Category: Softstarter Terminal Shrouds

Softstarter PSTX 300-690-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSR SSTR 600V/24V AC/DC 15.2A

Category: Basic Control Softstarters

PSR Series Softstart (Compact style). 104 FLA (Full Load Amps). Motor Voltage: 208V - 600V AC. Control Voltage: 120V - 240V AC. Din-Rail/Screw Mountable. Requires: TA75 Series Overload Protection & DB80 Series Mounting Kit.

Category: Basic Control Softstarters

Abb; Softstarter; Voltage Rating: 208 - 600 Vac; Amperage Rating: 60 Amp; Wattage: 15 Kw At 230 V, 30 Kw At 400 V, 37 Kw At 500 V; Power Supply: 100 - 240 Vac;connection: Screw Terminal; Operating Temperature: -25 To +60 Deg C; Frequency Rating: 50/60 Hz; Starting Capacity At Maximum Rated Current Ie: 240 Amp For 6 S;service Factor Percentage: 100 Pct; Ramp Time: For Start: 1 - 10 S, Stop: 0 - 20s; Tightening Torque: Main Circuit: 8 N-m, Supply Circuit: 0.6 N-m, Control Circuit: 0.6 N-m; Signal Indication Of Ramp(led): Green; Number Of Starts Per Hour:10 At 3.5 X Ie For 7 S 50 Pct On Time 50 Pct Off Time; Connecting Capacity: Maincircuit: (1) 10 - 35 Sq-mm/(2) 6 - 16 Sq-mm Rigid, Control And Supply Circuit: (1) 0.75 - 2.5 Sq-mm/(2) 0.75 - 1.5 Sq-mm Rigid; Storage Temperature: -40 To +70deg C; Communication: Filed Bus Plug (optional)

Category: Basic Control Softstarters

Terminal Enlargement, 3-Pole, For use with AF116-AF146 Contactors

Category: Softstarter Terminal Enlargements

ABBPSR2560011 24V COIL

Category: Basic Control Softstarters

ABB AB-PROFINET-2

Category: Softstarter Communication Adapters

PSR60-MS165 Connection Kit

Category: Softstarter Connection Kits

Terminal Shroud for Compression Lugs. For use with PSS85/147 - 142/245 & PST85 - 142 Series Softstarters and A/AF145 - A/AF185 Series Contactors.

Category: Softstarter Terminal Shrouds

Terminal Enlargement. For use with PSS175/300 - 300/515, PST175 - 300 Series Softstarters and A/AF210 - A/AF300 Series Contactors.

Category: Softstarter Terminal Enlargements

Connection Kit for PSR37 - PSR45 Series Softstarters and MS450 Series MMP.

Category: Softstarter Connection Kits

PSTX AnyBus Adapter, PROFIBUS

Category: Softstarter Communication Adapters

Softstarter PSTX105-690-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

Enclosed Softstarter, 250 Hp @ 480V, 302 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 48”H x 36”W x 16”D.

Category: Enclosed Softstarters

PSTX300-600-70 Softstarter For Max 600 Volt AC Main Voltage & 100 - 250 Volt AC 50/60Hz Control Supply Voltage IEC Maximum of 300 Amp, 1SFA898114R7000

Category: Advanced Control Softstarters

Enclosed Softstarter, 150 Hp @ 480V, 192 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: 300 Amp Thermal Magnetic CB, Emergency Bypass (AC3), 120V 75 VA Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 48”H x 36”W x 16”D.

Category: Enclosed Softstarters

Softstarter PSTX370-690-70 has a rated maximum operational current of 370 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

Enclosed Softstarter, 200 Hp @ 480V, 248 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 48”H x 36”W x 16”D.

Category: Enclosed Softstarters

Enclosed Softstarter, 75 Hp @ 480V, 104 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 30öH x 30öW x 12öD.

Category: Enclosed Softstarters

Softstarter PSTX170-690-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 1062 FLA (Full Load Amps). Heavy Duty: 840 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. 17 Inch Width, 20 Inch Height, 14 Inch Depth Weight: 141.54Lbs. ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

Enclosed Softstarter, 125 Hp @ 480V, 169 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 48”H x 36”W x 16”D.

Category: Enclosed Softstarters

Softstarter PSTX60-690-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters