Search results

OZ-Gedney Type SUEC Edge Conduit Clamp, 1/2 IN Cable, Cable Type: Rigid Conduit, Malleable Iron, Steel Nuts And Bolts, Finish: Clamp: Hot Dip Galvanized, Hardware: Mechanically Galvanized, For Securing Rigid Conduit Across The Beam, Channel And Ang

Category: Malleable Iron EMT Edge Type K-Clamps

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-3/16 IN Length X 2-3/16 IN Width, 9/16 I

Category: Straight Squeeze Flex Connectors

Liquidtight Sealing Ring Assembly, Trade Size: 1 Inch, Steel Retaining Ring, Neoprene Gasket, Finish: Zinc Electroplated, For Providing a Positive Seal Between Shoulder of Fitting and Enclosure.

Category: Liquidtight Connectors - Accessories

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 1-1/4 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 2-1/2 IN Width, 2 IN Height, Third Party Cer

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney BS-A Series Domed Top Design Cover, 1/4 IN Hub, Screw-In Mounting, Stamped Copper-Free Aluminum, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Used To Cover Aluminum Conduit Body Opening

Category: Aluminum Conduit Body Covers

OZ-Gedney Type UNF Conduit Union, Trade Size: 2 IN, 3-3/4 IN Outside Diameter, Length: 2-9/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Tapered FNPT, Third Party Certification: UL File Number E-34997 Listed For Class I, Division 1,

Category: Explosion-Proof Type UNF Unions

Grounding Bushing, Insulated, Size: 1 Inch, Material: Malleable Iron Or Steel/Zinc Plated, Connection Type: Set-screw, Maximum Temperature Rating: 150° C, Features: For Rigid, IMac, Met, Outside Diameter: 1 5/8 Inch, Width: 3/4 Inch, Grounding Wire Size Minimum: 8 Wag

Category: Threaded Ground Bushings

Grounding Bushing, Insulated, Size: 4 Inch, Material: Malleable Iron Or Steel/zinc Plated, Connection Type: Set-screw, Maximum Temperature Rating: 150° C, Features: For Rigid, IMac, Met, Outside Diameter: 5 Inch, Width:1 1/8 Inch, Grounding Wire Size Minimum: 250 Mm

Category: Threaded Ground Bushings

OZ-Gedney Type 300R Hex Reducing Bushing, Size: 1-1/2 X 1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded, 2-3/8 IN Width Across Corners, 15/16 IN Thread Length, Flange Thickness: 5/16 IN, Third Party Certification: UL File Nu

Category: Iron Alloy Reducing Bushings

Conduit Body with Cover/Gasket, Type: T, Size: 1-1/2 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type T Iron Conduit Bodies

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2 IN Body Diameter X 5-1/16 IN Overall Length, 2-5/8 IN Turning Radius, 6 OZ Sealing Compound Required, 1/4 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

Liquidtight Connector, 45°, 3", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT, RA

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-G FSK2-250 2" THRU WALL

Category: Iron Rigid Conduit Cable Supports

Sheathed Cable Connector, Installation (2) Screw Clamp, Trade Size 1 Inch, Cable Type Non-Metallic Sheathed Cable/Armored Cable/Flexible Cable/Metal Clad Cable, Throat Type Insulated, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Includes Locknut, Clamping Range 0.42 to 1.05 Inch, Overall Dimension 2-1/16 Inch W

Category: Iron NM Cable Connectors

Conduit Hardware, Bushings, Insulating, Trade Size: 1 Inch, Material: Malleable Iron or Steel/Zinc Plated, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, Outside Diameter: 1 5/8 Inch, Width: 3/4 Inch, Gr

Category: Threadless Ground Bushings

Rigid Conduit Expansion Coupling, Trade Size 1-1/2 Inch, Diameter 4-3/8 Inch, Length 9-7/8 Inch, Maximum Movement 4 Inch, Constructional Feature Corrosion Resistant, Material Ductile Iron Body, Tinned Copper Bonding Jumper, Neoprene Grommet, Approval UL, Used On Rigid Conduit/IMC

Category: Iron Rigid Conduit Expansion Couplings

Grounding Bushing, Insulated, Threadless, Size: 1-1/2 Inch, Cable Range: 4 - 14 AWG, Malleable Iron

Category: Threaded Ground Bushings

3/4" COND BODY FORM7

Category: Type E Iron Conduit Bodies

OZ-Gedney Type LL Conduit Body, 1-1/4 IN Hub, Length: 7-7/8 IN, 2-5/8 IN Height, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 34 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2 Per NEC Section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LL Iron Conduit Bodies

Conduit Body, Type: C, Form 7, Size: 2-1/2 Inch, Material: Iron Alloy

Category: Type C Iron Conduit Bodies

Conduit Body Cover With Gasket, Size: 1-1/2 Inch, Form 7, Material: Iron Alloy

Category: Iron Conduit Body Covers With Gaskets

Conduit Body, Type: LB, Size: 1-1/4 Inch, Spec 5, Material: Malleable Iron, Included with Covers and Gaskets, For Use With Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies

Conduit Body, Type: LB, Size: 1-1/2 Inch, Spec 5, Material: Malleable Iron, Included with Covers and Gaskets, For Use With Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies

4 IN IRON UNION

Category: Explosion-Proof Type UNY Unions