Search results

OZ-Gedney Type LR Conduit Body, 1-1/4 IN Hub, Length: 8-1/4 IN, 2-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 32 CU-IN Volume, Third Party Certification: UL File Nu

Category: Type LR Iron Conduit Bodies

Grounding Bushing, 1-1/2 Inch, Threaded, Insulated, 14 to 4 AWG, Material: Malleable Iron, Lug: Bronze, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

EMT Compression Connector, 1 inch, 90°, Material: Malleable Iron

Category: Malleable Iron EMT Compression Connectors

Conduit Hub, Type: Space-Maker, Size: 1-1/4 Inch, Insulated, Malleable Iron/Zinc

Category: Malleable Iron Conduit Hubs With Grounding

OZ-Gedney Type EYAM Vertical/Horizontal Sealing Fitting, Size: 3 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 3-1/8 IN Body Diameter X 9-3/4 IN Overall Length, 3-7/8 IN Turning Radius, 1 LB

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Grounding Bushing, 3 Inch, Threaded, Insulated, 6 AWG - 250 MCM AWG, Material: Malleable Iron, Lug: Bronze, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZG S-4000-BO TYPE S 4" CBL S

Category: Iron Rigid Conduit Cable Supports

O-Z/Gedney B-150 Type B Conduit Bushing, 1-1/2 in Trade, Malleable Iron, Zinc Plated

Category: Rigid & IMC Bushings

Conduit Locknut, Trade Size 2-1/2 Inch, Diameter 3.54 Inch, Thickness 0.39 Inch, Material Aluminum, Installation 8 TPI Threaded, Approval UL 514B, CSA C22.2, Applicable Standard W-F-408E, NEMA FB-1, Application Used Where there is a Concern with Fasteners Becoming Loose, Used On IMC/Rigid Conduit

Category: Aluminum Conduit Locknuts

OZ-Gedney Type C Conduit Body, 1/2 IN Hub, Length: 5 IN, 1-1/4 IN Width, 1-3/8 IN Height, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 4.2 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 00979

Category: Type C Aluminum Conduit Bodies

Ozg T50a 1/2 Alum T Cond Body

Category: Type T Aluminum Conduit Bodies

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-1/4 IN Body Diameter X 5-1/2 IN Overall Length, 3 IN Turning Radius, 9 OZ Sealing Compound Required, 1/2 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 3/4 IN, 1-1/4 IN Outside Diameter, Connection: MNPS, 5/8 IN Thread Length, Flange Thickness: 3/16 IN, Third Party Certification: UL File Number E-11853, C

Category: Iron Chase Nipples

OZ-Gedney Type CH Space-Maker Conduit Hub, Size: 3 IN, Malleable Iron, Finish: Zinc Plated, Connection: 3-8 Female Tapered NPSM, Dimensions: 4-3/8 IN Diameter X 3-5/8 IN Length, Box Wall Thickness: 23/32 IN, Third Party Certification: UL File Numbe

Category: Malleable Iron Conduit Hubs

Conduit Offset Nipple, Type Offset, Threaded Male, Trade Size 3/4 Inch, Length 1-5/8 Inch, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard NEMA FB-1

Category: Zinc Die Cast Offset Nipples

Grounding Bushing, 3-1/2 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 2/0 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Body, Type: LB, Size: 1/2 Inch, Form 85, Includes Cover and Gasket, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Type LB Aluminum Conduit Bodies

1-1/2 IN 45 DEG CONN LFMC

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Liquidtight Grounding Connector, 90 Degree, Insulated, Size: 2 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Conduit Body Cover, Size: 1-1/4 & 1-1/2 Inch, Spec 5, Material/Finish: Iron/Hot Dipped Galvanized

Category: Iron Conduit Body Covers

OZ-Gedney Type C Conduit Body, 4 IN Hub, Length: 18-1/8 IN, 5-1/2 IN Width, 5-5/8 IN Height, Sand-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (350 MCM) Conductors, 320 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2, Per NEC section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type C Aluminum Conduit Bodies

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/8 IN Height, 4-1/4 IN Width, Size: 3 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party Standards

Category: Aluminum Conduit Locknuts

Ozg Lr87 3 Mall Lr Condbdy

Category: Type LR Iron Conduit Bodies

OZ-Gedney Spec 5 Type C Conduit Body, 2-1/2 IN Hub, Length: 15-1/8 IN, 4-3/8 IN Width, 4 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4/0 AWG) Conductors, 153 CU-IN Volume, Third Party Certi

Category: Type C Iron Conduit Bodies