Search results

Slotted grommet edging, .062" thickness, weather resistant polyethylene, black.

Category: Grommet Edging

Braided Expandable Sleeving, 1.75" diameter (44.5mm), provides continuous abrasion resistance for wires, cables and tubing. The highly flexible open weave will not trap heat or humidity, black, Polyethylene Terephthalate, 200 ft. per reel.

Category: Braided Expandable Sleeving

StrongHold™ Cable Tie, 9.84L (250mm), Standard, Nylon, Weather Resistant, Black, Package 100

Category: Non-Releasable Cable Ties

Dome-Top® barb ty clamp tie, light-heavy cross section, 1/4 (M6) screw, 15.5 (394mm) length, weather resistant nylon 6.6, black, bulk package.

Category: Screw Mount Cable Ties

Fir Tree Push Mount with Umbrella, UV Nylon, Black

Category: Cable Tie Bases

White, thermal transfer marker plate, 2.00" x 0.5".

Category: Cable Tie Marker Plates

Pan-Steel® Polyester Fully Coated Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, 316 stainless steel is wrapped in UV-resistant, halogen-free, low-smoke Polyester to promote worker safety

Category: Non-Releasable Cable Ties

Polyester Fully Coated 316 Stainless Steel Cable Tie, Black, Heavy Cross Section, 7.9" Long, .310" Wide, .010" Thick, 2" Max Bundle, 250lb Rated, 50/PK

Category: Non-Releasable Cable Ties

Pan-Wrap™ Braided Expandable Sleeving, 1" diameter, black, polyethylene terephthalate, 100 ft. per reel.

Category: Braided Expandable Sleeving

Pan-Ty® locking tie, miniature cross section, 3.9 (99mm) length, flame retardant nylon 6.6, ivory.

Category: Miniature Cable Ties

The super grip adhesive backed cable tie mount in black is mounted with very high-bond adhesive and measures 0.75" x 0.75" (19.1 mm x 19.1 mm). It is made of heat-stabilized weather-resistant nylon 6.6, which increases mechanical strength, heat and wear r

Category: Cable Tie Bases

Pan-Ty® locking tie, miniature cross section, 8.0 (203mm) length, nylon 6.6, red.

Category: Miniature Cable Ties

PDT MMP350W38-CQ MARKER PLATE

Category: Cable Tie Marker Plates

Marker plate, four holes, 316 Stainless Steel, heavy cross section, 3.50" x .75", bulk package.

Category: Cable Tie Marker Plates

Pan-Ty® locking tie, standard cross section, 11.5 (292mm) length, nylon 6.6, black, standard package.

Category: Non-Releasable Cable Ties

Pan-Ty® locking tie, standard cross section, 14.5 (368mm) length, military spec weather resistant nylon 6.6, black, standard package.

Category: Non-Releasable Cable Ties

Tak-Ty® hook & loop strip roll cable tie, 75' (22.9m) length, .75 (19.1mm) width, nylon loop, polyethylene hook, white.

Category: Releasable Cable Ties

Slotted grommet edging, .055" thickness, nylon 6, natural.

Category: Grommet Edging

Corrugated loom tubing slit wall, 1.50" (38.1mm) x 500' (152.4m), heat stabilized black nylon 6.

Category: Split Wall Loom Tubing

Clincher™ adjustable releasable clamp, #6 Screw (M3), .19" - .69" (4.8mm - 17.5mm) bundle, gray, standard package.

Category: Cable Clamps & Clips

The cable tie mount in white uses #6 (M3) screws or user supplied adhesive. It measures 1.12" long x 1.12" wide (28.5 x 28.5 mm). It is used with miniature, intermediate, and standard cable ties. It is made of nylon 6.6, which increases mechanical strengt

Category: Cable Tie Bases

Fixed Diameter Cable Clamp, Nylon, White, .62" Max Bundle, Pack of 1000

Category: Cable Clamps & Clips

Cable Tie Fir Tree Push Mounts, Length 8", Maximum Bundle Diameter of 2.0" (50.8 mm) / Panel Hole Diameter Range of 0.25 to 0.28" (6.3 to 7.1 mm), Heat Stabilized Nylon 6.6 (Indoor Heat Resistant), Black, Package of 500

Category: Cable Tie Bases

The cable tie mount in aqua is applied with a #10 (M5) screw and is 0.61" (15.5 mm) wide. It is made of Tefzel for outdoor environments. It comes in packages of 100.

Category: Cable Tie Bases