Search results

Available in die cast aluminum with a painted black (BK), brass (BS), nickel (NK), bronze (BZ) or gray (GY) finish. Insert areas allow for tile or carpet cutouts to match finished floor. NOTE: Add suffix “TR" to the end of the part number to indicate tamper-resistant cover assembly.

Category: Round Recessed Box Covers

DBL GANG PLATE W/ACT KO

Category: Poke-Through Mounting Plates

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. NOTE: Add suffix “TR" to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw.

Category: Square / Rectangle Recessed Box Covers

Combination Carpet and Tile Flange, 1-Gang, Powder-Coated Aluminum, Brass

Category: Square / Rectangle Recessed Box Flanges

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Cover has two 1/2" trade size conduits and one 3/4" trade size threaded conduit opening for feeding cables and wires through the floor. Flush flanges available in a variety of colors/finishes. Slide covers match painted flange colors. Aluminum and brass covers shipped with black slide covers. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. [295 cu.cm] cap

Category: Assembled Recessed Round Boxes

Complete with one 3/4" [19.1mm] conduit and two 1/2" trade size adapters and closure plugs. Colors available in painted gray (GY), black (BK), forged brushed aluminum (AL), and plated brass (BS). Use with the RC7STC Insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC7AFFTC Series Poke-Thru Devices require a 3 1/16" [78mm] diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimu

Category: Poke-Through Cover Assemblies

Surface Style Cover Assembly with Floor Insert, Material/Finish: Die Cast Aluminum/Gray

Category: Square / Rectangle Recessed Box Covers

WMD RC9CM2TCGY 2IN FURNITURE

Category: Poke-Through Cover Assemblies

Wmd 428bl Blank Plate Blk

Category: Square / Rectangle Recessed Box Covers

WMD PSRC9TCBS

Category: Assembled Poke-Through Units

Single receptacle faceplate. Hole diameter: 1.39" (35mm). NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Blank plate. Used to blank off the entire center compartment when no devices or cabling are to be used.

Category: Recessed Compartment Box Covers

WMD EFBCMG EVOLUTION FLR BOX

Category: Recessed Floor Box Tools

For use with 10" [254mm] diameter hole. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two 10ATCPB plated finishes: brass (PB) and satin chrome (SC).

Category: Recessed Floor Box Service Fittings

All communication device accepts up to four UTP connectors. Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Unit includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

2" IPS to 1/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

6IN TILE SHIMS

Category: Poke-Through Mounting Plates

2-Gang, Cover Plate Flange, Metallic, Color: Bronze. WxL: 7.624" x 4.524". For use on: 880S2, 880M2, 880CS2-1, 880CM2-1 Floor Boxes in Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

WMD EFS-MB FLAT SCREEN MOUNTI

Category: Recessed Home Entertainment Boxes

WMD FPCTCBZTR-NA FLANGE INSRT

Category: Square / Rectangle Recessed Box Covers

WMD RC9 CONTROLLE

Category: Poke-Through Cover Assemblies

W-mold 431br Plate Dbl Blanki ng Walker Floor Systems

Category: Square / Rectangle Recessed Box Covers

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. NOTE: Add suffix “TR" to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. "NA" indicates North American made and complies with the Buy American Act, NAFTA, and ARRA requirements.

Category: Square / Rectangle Recessed Box Covers