Search results

Cable Tie Mount, Applied with #6 (M3) Screws, 0.32" Wide, Heat-Resistant Nylon 6.6, Ivory, Package of 1000

Category: Cable Tie Bases

Winged Push Barb Cable Tie Mount, black, standard package.

Category: Cable Tie Bases

Masonry Push Barb Cable Tie Mount, Nylon 6.6, Requires a Hole Diameter of 0.38" (9.7 mm), Indoor/Outdoor, Used With Miniature, Intermediate, Standard Cables Ties, Black, Package of 1000

Category: Cable Tie Bases

The low profile flat cable tie mount in gray is applied with rubber adhesive tape. It is 0.13" (3.4 mm) high and can support a maximum flat cable width of 3.44" (87.4 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resista

Category: Cable Tie Bases

Lightening Hole Cable Tie Mounts, Secure Cable Bundles That Run Through Bulkhead Lightening Holes and Protect Them From Sharp Edges, Indoor Environments and With #10 (M5) Screws or 3/16 (4.7) Rivets, Nylon 6.6, Natural, Package of 500

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts Panel Hole Diameter of 0.35 to 0.40" (9.0 to 10.0mm), Made of Heat-Stabilized Nylon 6.6, For Use In Indoor Environments and With Miniature, Intermediate and Standard Cable Ties, Package of 500

Category: Cable Tie Bases

Masonry Push Barb Cable Tie Mount, Nylon 6.6, 01.41” x 0.28” (35.8mm x 7.1mm), Requires a Hole Diameter of 0.31” (8.0mm), Indoor/Outdoor, Used With Miniature, Intermediate, Standard, Light-Heavy, Heavy, and Hook and Loop Mount Cables Ties, Black, Package of 500

Category: Cable Tie Bases

The masonry push barb cable tie mount in black, made of impact modified, weather-resistant nylon 6.6 uses a fir tree hole mounting method. It requires a hole diameter of 0.19" (4.8 mm) and is designed for use in indoor and outdoor environments. It is used

Category: Cable Tie Bases

The cable tie mount in natural color is applied with a #10 (M5) screw and is 0.61" (15.5 mm) wide. It is made of flame-retardant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness in indoor environments. It comes in pa

Category: Cable Tie Bases

Harness elastic Retainer, .75" (19.1mm) Bundle, #6 Screw (M3).

Category: Cable Tie Bases

The push rivet applied low profile cable tie mount in blue with 0.169" (4.3 mm) hole keeps bundle close to mounting surface and installs with an integral rivet for a strong, secure installation. It is for indoor use only made of Nylon 6.6 and comes in pac

Category: Cable Tie Bases

The 4-way mount in white is applied with user-supplied adhesive or a #6 (M3) screw and measures 1" x 1" (25.4 mm x 25.4 mm). It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for indoor e

Category: Cable Tie Bases

Latching flat cable holders, #6 screw (M3), 2" (50.8mm) cable width, gray.

Category: Cable Tie Bases

The screw applied mount for Tak-Ty hook and loop cable ties in natural uses #6 (M3) screw. It is 1.12" long x 1.12" wide (28.5 x 28.5 mm) and made of flame-retardant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness.

Category: Cable Tie Bases

Epoxy Applied Cable Tie Mount, 0.26" x 0.98", Weather Resistant Nylon 6.6, Outdoor, Used with Miniature, Intermediate, and Standard Cable Ties, Black, Package of 500

Category: Cable Tie Bases

The epoxy applied cable tie swivel mount in natural is affixed with user supplied EMA epoxy. It is 1.13" long x 1.13" wide (28.7 x 28.7 mm) and has an aluminum base and a nylon mount. It is used with miniature, intermediate, and standard cable ties. It is

Category: Cable Tie Bases

Latching flat cable mount, #6 screw (M3), 2" (50.8mm) cable width, gray, standard package.

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts, Length 14.4", Maximum Bundle Diameter of 4.0" (101.6 mm) / Panel Hole Diameter Range of 0.25 to 0.28" (6.3 to 7.1 mm), Heat Stabilized Nylon 6.6 (Indoor Heat Resistant), Black, Package of 500

Category: Cable Tie Bases

Cable Spacer Cross, Natural.

Category: Cable Tie Bases

The Pan-Ty® cable tie mount in light blue is used with miniature, intermediate, and standard cross section cable ties and applied with a #8 (M4) screw. It is 0.43" (10.8 mm) wide and made of metal-detectable nylon 6.6 for indoor environments. It comes in

Category: Cable Tie Bases

Cable Tie Fir Tree Push Mounts, Length 7.4", Maximum Bundle Diameter of 1.88” (48mm) / Panel Hole Diameter Range of 0.18”–0.19” (4.6mm–4.9mm), Heat Stabilized Nylon 6.6 (Indoor Heat Resistant), Black, Package of 500

Category: Cable Tie Bases

The pan-post standoff is natural color and requires a #10 (M5) screw. It measures 1.06"L x .72"W x 4.60"H (26.9 x 18.3x 116.9 mm). It is used with miniature, intermediate, and standard cable ties. It comes in packages of 100.

Category: Cable Tie Bases

The epoxy applied cable tie mount in natural color is affixed with EMA epoxy adhesive. It is made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, and standard cable ties.

Category: Cable Tie Bases

The super grip adhesive backed cable tie mount in black is mounted with very high-bond adhesive and measures 1.12" x 1.12" (28.6 mm x 28.6 mm). It is made of heat-stabilized weather-resistant nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is designed for outdoor and high-temperature environments and comes in packages of 100.

Category: Cable Tie Bases