"48-89-4606"

17T8/LED/48-835/BP 120-277V

Category: T8 Tubular LED Lamps

4 Ft. LED T8 Lamp, 8.5 Watt, 120-277V, 82 CRI, 1650 Lumens, 5000K, Type-B (Single & Double Ended Bypass)

Category: T8 Tubular LED Lamps

12W 1800LM T8 4 Ft. Type A+B+Single+Double End Glass 80CRI 5000K 120-277. Length is 48 Inches. (EiKO ordering code - 12502), (DLC Code - PL5F0QSFTYX1)

Category: T8 Tubular LED Lamps

LED Lamp, 16 Watt, 120-277 Volt, Bulb: T8, Length: 48 Inch, Base: Medium Bi-Pin (G13), Lumens: 1750, Beam Angle: 190°, Field Angle: 300°, CRI: 80, Color Temperature: 3000K, Rated Life: L70 50,000+ Hours, NOTE: Double-Ended Ballast BYPass Installation, Wired at Both Ends, Utilizes Existing Lampholders, Shunted or Non-Shunted (see wiring diagram on Catalog page .pdf). UL rated for enclosed fixtures. TCP LED Type AB™ Tube.

Category: T8 Tubular LED Lamps

4' T8 Type A (Double Ended) or Type B (Single/Double ended) 5CCT Selectable PET Coated LED Lamp: 15W, 1800 Lumens, Voltage: 120-277, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), CRI: 80, Color Temperature: 30K/35K/41K/50K/65K. Rated for open or enclosed fixtures and damp locations.

Category: T8 Tubular LED Lamps

LED Lamp, 12W, Voltage: 120-277, 347 VAC (Ballast Dependent), Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1300 (LBF), 1750 (NBF), 2340 (HPF), CRI: 80, Color Temperature: 3500K, Rated Average Lifr: 50,000 Hrs. Approved for open and enclosed fixtures ***Warning: Works on Compatible Instant Start Electronic Ballasts *** See Catalog page for compatibility chart. NOTE: Use shunted sockets for Instant Start ballasts. Use non-shunted sockets for Rapid, Programmed, and Dimmable ballasts.

Category: T8 Tubular LED Lamps

10.5 Watt T8 LED; 4Ft; 5000K; Medium Bi Pin Base; 50000 Average rated hours; 1700 Lumens; Type B; Ballast Bypass; Single or Double Ended Wiring

Category: T8 Tubular LED Lamps

LED Lamp, 14.5W, 120-277V, Bulb: T8, 48", Base: Medium Bi-Pin (G13), Lumens: 2100, CRI: 80, Color Temperature: 4000K, Rated Life: Up to 50,000 Hrs. NOTE: Double-ended BYPass installation – wired at both ends. Utilizes existing lampholders – non-shunted or shunted.

Category: T8 Tubular LED Lamps

LED Linear, Single Ended, Type B, Bypass T8, 120-277V, 13 Watt, 1750 Lumens, 4000K, 82 CRI. NOTE: This lamp is compatible with non-shunted lamp holder ONLY. Meets NSF requirements (use of a shatter guard required).

Category: T8 Tubular LED Lamps

LED Lamp, 16W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 2050, CRI: 80, Color Temperature: 4000K, Rated Life: 50,000 Hrs., NOTE: Direct Wire Live / Bypass Ballast / Use Non-Shunted Lamp Holders.

Category: T8 Tubular LED Lamps

LEDlescent LED Ballast-Free Lamp, 17 Watt, 120-277 Volt, Bulb: T8 (Tubular), Base: 2-Pin (G13), Lumens: 2100, CRI: 82, Color Temperature: 3500K, Length: 48 inch, Designed to Replace Traditional Fluorescent T8/T12 Lamps by Bypassing the Existing Ballast, Standard Case Qty: 25 *Sylvania Part # 75025*

Category: T8 Tubular LED Lamps

LED Lamp, 14.5W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1650, CRI: 80, Color Temperature: 3500K, Rated Life: Up to 50,000 Hrs. NOTE: Must remove or bypass ballast.

Category: T8 Tubular LED Lamps

4 Ft. LED (UL Type B) T8 Lamp, 12W, 120-277V, Base: G13, CRI: 80, Lumens: 1700, Color Temperature: 3500K, Double-Ended Ballast Bypass, Rated Life: 50,000 Hrs. p/n 532689, 12NC 929001876934. DLC Product ID: PHSBLUQN

Category: T8 Tubular LED Lamps

SubstiTUBE LED, 12 Watt, 120-277 Volt, Bulb: T8 (Tubular), Base: 2-Pin (G13), Lumens: 2100, CRI: 82, Color Temperature: 4100K, Length: 48 inch, 1 per SKU, Standard Case Qty: 25 *Sylvania Part # 41276*

Category: T8 Tubular LED Lamps

LED Lamp, 13W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1650, CRI: 82, Color Temperature: 3500K (Warm White), Rated Life: Up to 50,000 Hrs. NOTE: Must remove or bypass ballast. Replace shunted lamp holder with non-shunted one if applicable (Instant Start)

Category: T8 Tubular LED Lamps

LED Lamp, 13W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1700, CRI: 82, Color Temperature: 4000K (Cool White), Rated Life: Up to 50,000 Hrs. NOTE: Must remove or bypass ballast. Replace shunted lamp holder with non-shunted one if applicable (Instant Start)

Category: T8 Tubular LED Lamps

10.5 watt - 48" - T8 - Medium Bi-Pin (G13) Base - 4,000K - Cool White

Category: T8 Tubular LED Lamps

LED Lamp, 11.5W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1700, CRI: 82, Color Temperature: 4000K, Rated Life: Up to 50,000 Hrs

Category: T8 Tubular LED Lamps

LED Lamp, 10.5W, 120-277V, Bulb: T8, 48", Base: Medium Bi-Pin (G13), Lumens: 1650, CRI: 82, Color Temperature: 3000K, Rated Life: 50,000 Hrs., Bypass Ballast

Category: T8 Tubular LED Lamps

SubstiTUBE LED, 12 Watt, 120-277 Volt, Bulb: T8 (Tubular), Base: 2-Pin (G13), Lumens: 2100, CRI: 82, Color Temperature: 5000K, Length: 48 inch, 1 per SKU, Standard Case Qty: 25 *Sylvania Part # 41277*

Category: T8 Tubular LED Lamps

LED Lamp, 11.5W, 120-277V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1700, CRI: 82, Color Temperature: 4000K, Rated Life: 50,000 Hrs. NOTE: Double-ended BYPass installation – wired at both ends. Utilizes existing lampholders – non-shunted or shunted.

Category: T8 Tubular LED Lamps

Dimmable Type B (Ballast ByPass) LED Lamp, 13W, 120V, Bulb: T8, Length: 48", Base: Medium Bi-Pin (G13), Lumens: 1700, CRI: 82, Color Temperature: 3000K (Warm White), Rated Life (L70): Up to 50,000 Hrs. NOTE: Must remove or bypass ballast. Replace shunted lamp holder with non-shunted one if applicable. P/N 98372, Mdl.# 13T8/4F/DIM/830/BYP

Category: T8 Tubular LED Lamps

PHI 14.5T8/COR/48-830/MF20/G/

Category: T8 Tubular LED Lamps