"18375 morris - gwg products inc."

Service Entrance Cap, Reducer Type, Conduit Size: 1". Weather Resistant, PVC. Includes: Female Slip Ends.

Category: Service Entrance Caps - Non-Metallic

National Electric Code requires electrical distribution equipment to be rated as ôService Entranceö, wherever electrical power enters a building or other structure. Service entrance products are typically utilized on single-family residences and mobile homes. Midwest Electric offers a broad range of surface mount and pedestal units, factory assembled and wired. Pedestal units come standard with loop feed lugs to reduce installation time and labor expense. Service Entrance equipment is made of heavy, galvanized G-90 steel, preventing corrosion and fading., ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Type G Budget Line Grounding Rod Clamp, 1/2 IN, 5/8 IN Rod, 10-2 AWG Conductor, Copper

Category: Ground Rod Ground Clamps

Eaton Crouse-Hinds series NCGS solar cord grip, Hole cable diameter: 7 mm, Nylon, 3 holes, 3/4", #12 AWG, #10 AWG, 1000V PV cable

Category: Solar Cord Grips

*Not Available* Disposable Paint Project Respirator, 5000 Series, Size: Medium.

Category: Respirators

Low Profile Parking Garage Light, 80 Watt, 9830 Lumens, 82 CRI, 4500K, 200,000 Hrs

Category: Garage LED Lighting

Service Entrance Cap, Size 3/4 Inches, Width 1.76 Inches, Material Pvc, Color Gray, For Use With Schedule 40 And 80 Conduit

Category: Service Entrance Caps - Non-Metallic

CRO BJ74

Category: Bonding Jumpers

TELECOMMUNICATION

Category: Bus Bars

CRO BJ58 1 1/2 BONDING JUMPER

Category: Bonding Jumpers

Our Versatile, Economical Lockout Adjusts To Fit 1 To 6 1/2 Diameter Valve Handles, Replacing 3 Conventional Gate Valve Lockouts. Durable Polypropylene Is Resistant To Extreme Temperature Changes From -13?f To 194?f. Device Is Compact Foreasy Carrying

Category: Valve Lockouts

Entry Thread Sealing Washer, Material: Nylon, Finish: White, Thickness: 2 MM, Inside Diameter: 1/2 IN, Thread Type: NPT, Protection Rating: IP54, Standard: BS EN 60529:1992, For Use In Cable Glands

Category: Cable Gland Entry Thread Seals

Solid Brass, compression connector for termination grounding electrode to load centers using a #6 ground wire. Provides strain relief for grounding electrode conductor

Category: Bonding Connectors

4-1/2" To 6" Armored Ground Clamp Bronze

Category: Armored Cable Ground Clamps

EHC Service Entrance Cap, Aluminum Die Cast, 3/4 Inch, Clamp type

Category: Service Entrance Caps - Metallic

Tray Cable Connector, Explosion-Proof, Size: 2 Inch, Diameter: 1.40 - 1.74 Inch, Material: Aluminum, Type TC Cable Connectors are Suitable for Use With Type (TC) Tray Cable and Flex Cord in Ordinary, Wet, and Hazardous Locations.

Category: Aluminum Cable Glands

Sealing IP Washer, M25, Nylon, For Use With Cable Glands

Category: Cable Gland Earth Tags

Replacement Gland, Cable Range: 0.625 Inch - 0.750 Inch, Material: Neoprene Grommet. For Use w/ 3/4 Inch Connector Hubs.

Category: Replacement Cable Glands

4 BONDING JUMPER FOR XJG

Category: Bonding Jumpers

Waterpipe Mallable Iron Ground Clamp for Wire Range 6 - 2, Water Pipe Size 1/2, 3/4, 1, or rebar 4 - 10

Category: U-Bolt Ground Clamps

Flat Tinned Copper Grounding Braid. MBJ16-200-6, 120 A Ampacity, 31.57 kcmil (16 mm²), 7.874" (200 mm), 0.256" (6.5 mm) Hole.

Category: Metallic Grounding Braids

PVC21 PVC SHROUD - Push on shrouds are used to minimize the risk of dirt or foreign substances gathering on the cable gland body, and/or point of cable to gland interface. Standard shrouds are produced in black PVC. Refer to the specific cable gland page for the PVC Shroud catalog number that is appropriate for use with that specific style cable gland.

Category: Cable Gland - PVC Shrouds

Serrated Washer, M32 Metric, Stainless Steel

Category: Cable Gland Serrated Washers

OZ-Gedney Type CT Service Entrance Head, 1-1/2 IN Hub, Length: 3-25/32 IN, 5-3/8 IN Width, 4-3/4 IN Height, Malleable Iron, Brass Screws In Hood, Phenolic Insulator, Finish: Hot Dip Or Mechanically Galvanized, Connection: Threaded, 3 X 3/4 IN, 2 X 19/32 IN, 1 X 7/16 IN Insulator Holes, Third Party Certification: UL File Number E-11857, Applicable Third Party Standards: UL 514B, For Rigid Conduit, IMC And EMT Conduit

Category: Service Entrance Caps - Metallic