"ab-1010epg the austin co."

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, CO/ALR Duplex Receptacle, Straight Blade, Residential Grade, Grounding, Side Wired, Steel Strap, - White

Category: 15 Amp Residential Grade Duplex Receptacles

Diva Smart Dimmer Switch for the Caséta System, Works With 150W LED Bulbs or 600W Incandescent Bulbs, Does Not Require Neutral Wire, Tap Buttons For Full On/Off; Adjust Slider To Dim Or Brighten Light Level, Preset Allows You To Turn Your Lights On To Your Preferred Predetermined Level, Soft-Glow Light Bar Provides Easy And Precise Dimming Control, Add A 2nd Switch Anywhere By Pairing With A Mountable Pico Remote (Sold Separately), Use With A Mechanical Switch To Create A 3-Way Application, Add A Smart Hub To Connect With Alexa, Apple Home, The Google Assistant, Ring, Serena Shades, SONOS, And More Control At The Wall, With A Pico Smart Remote, With A Phone, Or Voice Assistant (Smart Hub Required For Phone And Voice Assistant Control)

Category: Wired Smart Devices

(3) 10 AWG Conductors and (1) 10 AWG Ground, NM-B, Pink (Some Remaining Orange Inventory), Solid Copper Conductor, 90°C Insulation, 600V, 250 ft. Package, Non-Metallic Sheathed Cable *** There is a current initiative among manufacturers for Purple to be the default color for 10/3 NM-B instead of the traditional Yellow. As inventories adjust, customers could receive either color. ***

Category: 10 AWG NM-B

1-Gang, (1) 1.406 Inch Hole Single Device Receptacle Wallplate, Standard Size, Material: 302 Stainless Steel, Device Mount - Color/Finish: Stainless Steel.

Category: 1-Gang Single Receptacle Wallplates

2-Gang, 1-Duplex 1-Decora/GFCI Device Combination Wallplate, Standard Size, Thermoplastic Nylon, Device Mount - White.

Category: Duplex Receptacle / Decorator-GFCI Combination Wallplates

15 Amp, 120/277 Volt, Duplex Style Single-Pole / Single-Pole AC Combination Switch, Commercial Grade, Grounding, Side Wired - White.

Category: 15 Amp Combination Toggle Switches

Combo Drill/Tap Bit, Size: 1/4-20NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

OCC's Category 6A field terminable plug is designed to support 10 Gigabit networks and can be easily terminated using parallel jaw pliers. Termination is accomplished by simply inserting the conductors into the wire manager, squeezing the wire manager to terminate the conductors and inserting wire manager into the plug housing. All eight conductors are simultaneously terminated when the wire manager is squeezed. This process ensures consistent, reliable terminations.

Category: Snap-In Cat 6 Jack Inserts

Conduit Strap, 1-Hole, 3/4 Inch Diameter, Malleable Iron With Hot Dipped Galvanized Finish, For Use With Rigid/IMC/EMT Conduit

Category: Malleable Iron 1-Hole Conduit Straps

Replacement Blades And Bit For The Adjustable Hole Saw With Auto-Set Arms (Cat. No. 53710), The Adjustable Hole Saw With Auto-Set Arms Provides Smooth Cuts From 2 To 7-Inches (5.1 To 17.8 Cm) In Drywall And Ceiling Tile, Features Integrated Gears For Easy Blade Adjustment And Centered Pilot Bit, Replacement Kit Comes With 2 Blades, 1 Pilot Bit, 2 Hex Keys, 4 Washers, 2 End Screws And 1 Set Screw, Using The Large Hex Key, Remove And Replace End Screw, Washers, And Blade, Using The Small Hex Key, Remove And Replace Pilot Bit Set Screw And Pilot Bit, After Replacing, Ensure All Screws Are Fully Seated And Snug-Tight Before Using The Adjustable Hole Saw With Auto-Set Arms To Cut Drywall Or Ceiling Tile

Category: Hole Saw Adapters

Fluorescent Lampholder, Non-Shunted, Medium Base, Bi-Pin, Slide-On, Turn-Type, Low Profile, Quickwire 18AWG Solid/Str Tinned, White, Includes Captive Nut Screws

Category: Medium Base Bi-Pin Fluorescent Lampholders

1-Gang, No Device Blank Wallplate, Standard Size, Thermoplastic Nylon, Box Mount - Ivory.

Category: 1-Gang Blank Wallplates

Combo Drill/Tap Bit, Size: 10-32NF, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Multi-Purpose Adapter Makes The Sockets Compatible With The Klein Knect™ System For Unlimited Driving Potential, Five Deep Well, Color-Coded, Impact Flip Sockets, Eight Color-Coded Low Profile Sockets, And Six Adapters For Maximum Flexibility, Set Includes A Pass Through Ratchet, 1/4 X 5/16, 3/8 X 7/16, 1/2 X 9/16, 5/8 X 3/4, And 11/16 X 13/16 Inch Deep Well Sockets, And 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16-Inch Low-Profile Sockets, Three Smallest Sockets (1/4-Inch To 9/16-Inch) Are Stackable On 650Qsal Shaft To Quickly Change Socket Sizes And Reduce The Number Of Tools Needed, Klein Knect™ Specialized Square Drive Adapters Compatible With Klein Tools Pass Through Socket Wrench (Cat. No. 65400) And Any 3/8-Inch Square Drive Ratchet, Small Parts Storage Tray Inside The Case To Secure Loose Fasteners, Washers And Extra Bits, Compact, Modular Storage System With A Clear Lid Is Compatible With Modbox™ And Stackable With Other Cases Of Its Similar Design, All Components Are Compatible With The 90-Tooth Pass Through Ratchet With Minimal Arc Swing For Ratcheting In Tight Spaces

Category: Sockets & Socket Sets

Padlockable Handle with 3 Padlocks in the OFF-position, Door Interlock in the ON-position. Units/type = 1 pcs. Screw Fixing from the Back Side of the Handle, No Screws on the Front, Ensures Double Insulation, Black

Category: Molded Case Circuit Breaker Operating Handles

Padlockable Handle with 3 Padlocks in the OFF-position, Door Interlock in the ON-position. Units/type = 1 pcs. Screw Fixing from the Back Side of the Handle, No Screws on the Front, Ensures Double Insulation, Black.

Category: Padlockable Circuit Breaker Handle Locks

20 Amp, 120/277 Volt, Toggle 3-Way AC Quiet Switch, Commercial Grade, Grounding, Side Wired - White.

Category: 20 Amp Commercial Grade Toggle Switches

50 Amp, 125/250 Volt, NEMA 14-50P, 3P, 4W, Plug, Straight Blade, Industrial Grade, Grounding, Angle - Black

Category: 50 Amp Straight Blade Plugs

BEHIND-THE-HEAD EARMUFFS

Category: Safety Earmuffs

Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Voltage, Ac/Dc Current, Resistance, Dc Micro Amps, Temperature, Diode Test, Continuity, Capacitance, Frequency/Duty Cycle, And Inrush, Transflective Reverse-Contrast Display Provides Excellent Visibility In Both Sunlight And Dark Environments, Illuminated Dial Ensures Clear Visibility And Easy Reading, Even In Low-Light Environments, Features A Low Impedance (Loz) Mode To Identify And Eliminate Ghost Voltages, Preventing False Readings And Ensuring More Accurate Measurements, Integrated Worklight Illuminates The Work Area For Improved Visibility In Dark Or Confined Spaces, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Rated Ip40 For Ingress Protection, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 3 X Aaa Batteries, Ergonomic Design And Overmold Provide A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters

Combo Drill/Tap Bit, Size: 8-32NC, Hex Shank Size: 1/4", Material Thickness: 10GA

Category: Combination Drill / Tap Bits

Incandescent Lampholder, Medium Base, One-Piece, Glazed Porcelain Outlet Box Mount Lampholder, Pull Chain, Single Circuit, Top Wired, White

Category: Pull Chain Incandescent & HID Lampholders

Strain-Relief Boot, Snag-Proof, RJ45, Color: Blue, Includes: (100) Boots. The boots protect against damage to the connector latch and help maintain the proper bend radius of the cable to ensure performance

Category: Modular Plug Boots