Poke-Through Systems

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish with a brushed aluminum and a black device plate. Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Anodized Aluminum

Category: Assembled Poke-Through Units

Flush Furniture Feed Poke-Through Unit, Hole Size: 4", Brass

Category: Assembled Poke-Through Units

STL FFPT4-CVR-BRN FFPT4 COVER

Category: Assembled Poke-Through Units

STL FPT3-CVR-BGE 2X2 POKE-THR

Category: Assembled Poke-Through Units

STL FPT4-CCH-2P FPT4-1TL-2C 1

Category: Poke-Through Cover Assemblies

STC FPT4-CVR-TBLK 4X4 POKE-THRU

Category: Poke-Through Cover Assemblies

STL FPT4-CVR-TBRS 4X4 POKE-TH

Category: Poke-Through Cover Assemblies

STL FPT4-CPB-2SYS 4X4 COM B P

Category: Poke-Through Cover Assemblies

Optional Threaded Conduit Hub for Communications Wiring, Size 1-1/4 Inch, Cast Iron

Category: Poke-Through Cover Assemblies

STL FPT4-CPA-3PAN 4X4 COM A P

Category: Poke-Through Cover Assemblies

Stl P90-3/4-al Flrplt W/plug

Category: Poke-Through Cover Assemblies

Poke-Thru, Tamper-Resistant, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

WLK RC3SHTCGY SLIDE HOLDER AS

Category: Poke-Through Cover Assemblies

WMD RC7AM2TCGY 2IN. FURNITURE

Category: Assembled Poke-Through Units

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

WMD 2150CHA 1-1/2IN TRADE SIZ

Category: Assembled Poke-Through Units

Wiremold audio/video interface plates (AVIP) allow for A/V connectivity in all Wiremold A/V compatible pathways. AVIP Series Device Plates are metal and have screwed-down connectors, which ensure a secure connection that cannot be easily pulled-out or disconnected while in use. Available in data, audio, and video versions, AVIP Series Device Plates help you stay connected in meeting and training rooms, collaboration spaces, or work areas.Microphone connections are now available with Switchcraft

Category: Poke-Through Mounting Plates

Used to upgrade existing installations of RC4 Poke-Thru Devices on carpet floors to meet scrub water requirements. Includes two 20A duplex receptacles that can be wired as a standard duplex or isolated ground. Also includes scrub water finish flange and slide holder assembly. Flange available in painted black (BK), gray (GY), ivory (VY), and brushed metal finishes in aluminum (AL), and brass (BS). See installation instructions with retrofit kit for complete installation details. NOTE: Existing i

Category: Assembled Poke-Through Units

Single-gang with one duplex receptacle opening.

Category: Poke-Through Mounting Plates

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Power Receptacles installed. For Center Compartment: One (1) 6ACT8A Mounting Plate, One (1) 6TRAC Mounting Plate, One (1) 6SER Mounting Plate. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Pass-Through Blank Housing Assembly (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) , One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device.

Category: Assembled Poke-Through Units

WMD 8ATC2PBZ-50 8IN PREWIRED

Category: Assembled Poke-Through Units

SC FFPT3-ALM 3IN FURN FEED PT

Category: Assembled Poke-Through Units

Available in gray (GY), and black (BK). NOTE: AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Poke-Through Cover Assemblies