Search results

Flange available in painted gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Includes two (2) Ortronics TracJack adapters, two (2) Ortronics Series II adapters, and two (2) Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AMD Series Poke-Thru Devices require a 3 1/16" (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Poke-Through Cover Assemblies

Poke-Thru Device, Flush, Finish Flange and Slide Holder Assembly, Non-Metallic Cover, Color: Aluminum. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Brass

Category: Square / Rectangle Recessed Box Covers

Flanged Cover Assembly For FloorPort Series Service Fittings, Color: Gray, Material: Die Cast Aluminum, Origin: USA

Category: Square / Rectangle Recessed Box Covers

6IN TILE SHIMS

Category: Poke-Through Mounting Plates

2-Gang, Cover Plate Flange, Metallic, Color: Black. WxL: 7.624" x 4.524". For use on: 880S2, 880M2, 880CS2-1, 880CM2-1 Floor Boxes in Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Blank Flanged Cover Assembly. Die-Cast Aluminum. Color: Nickel. For use with: Tile, Carpet. Origin: USA

Category: Square / Rectangle Recessed Box Covers

Two-gang device plate that will accept up to four (4) Extron Electronics AAP style plates. This device plate takes up two of the three gangs in the center compartment. Devices supplied by others.

Category: Poke-Through Mounting Plates

All communication device accepts up to eight UTP, fiber optic, audio, or video connectors. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes adapters to accept eight (8) Ortronics TracJack modular jacks, four (4) Ortronics Series II modular jacks, or Wiremold Open System adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

Includes one (1) adapter to accept two (2) Extron Electronics MAAP Series devices. (Sold separately.) NOTE: For RFB2 Series Floor Boxes only.

Category: Recessed Floor Box Service Fittings

Includes one (1) adapter to accept Ortronics TracJack devices, and one (1) adapter to accept Ortronics Series II devices (sold separately). NOTE: For use with RFB4E, RFB6, RFB6E Series Floor Boxes.

Category: Recessed Floor Box Service Fittings

Includes 862 Series Floor Box, One 15a, 125v Tamper-resistant Brown Duplex Receptacle, And One 895t Brass Duplex Receptacle Cover For Tile. Order 862kit When Using In Concrete Floor.

Category: Assembled Recessed Round Boxes

Single-gang device plate that will accept up six (6) Ortronics TracJack devices. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

WMD EFB-MAAP

Category: Recessed Compartment Box Device Plates

1-GANG CARPET & TILE FLANGELESS BK

Category: Square / Rectangle Recessed Box Flanges

WMD EFB6-3/4-11/4 6-GANG KNOC

Category: Square / Rectangle Recessed Box Covers

10IN PREWIRED RECESSED PT BK

Category: Assembled Recessed Round Boxes

Surface Style Cover with Floor Insert, Flange, Material/Finish: Die Cast Aluminum/Bronze

Category: Square / Rectangle Recessed Box Covers

WMD 6CFFTCBZ 6IN FURNITURE FE

Category: Poke-Through Cover Assemblies

WMD SGB-MAAP SGB PLATE W/ EXT

Category: Recessed Floor Box Service Fittings

WIREMOLD 897CTCAB FLOOR BOX TOP WITH DIVIDER/ADAPTER RING DUPLEX W/4 DATA PORTS ALL BRASS

Category: Round Recessed Box Covers

RFBA 4G 2.5 IN CIRC CVR FLOOR BOX

Category: Recessed Compartment Boxes

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Gray Powder Coat Finish

Category: Poke-Through Cover Assemblies