Search results

2-Gang, Cover Plate Flange, Metallic, Color: Gray. WxL: 7.624" x 4.524". For use on: 880S2, 880M2, 880CS2-1, 880CM2-1 Floor Boxes in Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

Aluminum housing and base 9 1/4'' x 4 1/2'' x 2 1/2'' (235mm x 114mm x 64mm) are provided with four (4) 1'' trade size knockouts in base for hardwiring unit and two dividers which allow units to be divided on either the ''X'' or ''Y'' axis/plane. Accommodates a variety of power (NEMA or decorator), and supports Ortronics and Wiremold Open Systems connectivity. Portals are field configurable by ordering the corresponding faceplates

Category: Recessed Compartment Box Covers

WMD RC9CFFTCGY P-THRU FURNITU

Category: Poke-Through Cover Assemblies

Flange available painted in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS). Aluminum and brass flanges shipped with black cover. Brass flange also available with brass colored cover assembly (AB). Aluminum flange also available with aluminum colored cover assembly (AA). Cover assembly also includes two openings for pass-through capability for one 4-pair Category 5e or Category 6 cable per opening. NOTE: Assembled with scrub water gasket. For use on

Category: Poke-Through Cover Assemblies

W-mold 430 Br Sgl Brass Plate

Category: Square / Rectangle Recessed Box Covers

DATA BRKT - EXTRON AAP

Category: Recessed Floor Box Service Fittings

WMD DQFP20UBK-2A DUAL BLACK 2

Category: Assembled Recessed Countertop Boxes

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Black Powder-Coat.

Category: Poke-Through Cover Assemblies

Poke-Thru Device Assembly, 1-1/4" and 2" Conduit Openings and Closure Plugs, Color/Finish: Brass

Category: Assembled Poke-Through Units

WMD FPBTCBKTR-NA FLANGE SOLID

Category: Square / Rectangle Recessed Box Covers

3-GANG AL TILE FLANGE / 880M3 BOX

Category: Square / Rectangle Recessed Box Flanges

Accepts up to three (3) Ortronics Series II devices. Ortronics devices sold separately. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Single-gang device plate that accepts standard 20A duplex receptacle or a duplex Turnlok receptacle. Fits in any one (1) of the shaded locations shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Poke-Thru, Tamper-Resistant, Surface Style Cover Assembly, Diameter: 7-1/4 Inch Round, Gray

Category: Poke-Through Cover Assemblies

PDSTL FITTING 11/4IN OPNG BOTH SIDE

Category: Recessed Floor Box Service Fittings

Floor Box Assembly, Furniture Feed, Diameter: 4 Inch, (2) 1/2 Inch and (1) 3/4 Inch Conduit Openings, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Brass, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

<p>1/2"" (12mm) high extension. Used to increase height of preset or afterset. Die cast construction. Attach to preset or afterset with push on metal sleeves (included). Cannot be stacked.</p>

Category: Recessed Floor Box Service Fittings

Single-gang with one 1.562" (39.7mm) receptacle opening.

Category: Recessed Floor Box Service Fittings

FLRPORT FLANGE W/INSERT BRONZE

Category: Square / Rectangle Recessed Box Covers

Holds up to three (3) devices of power, communications or audio/video devices. Bracket accepts standard size (2 3/4" x 4 1/2" (70mm x 114mm)) device plates sold separately by others.

Category: Recessed Floor Box Service Fittings

All communication floor boxes accept up to four UTP connectors. Flush poke-thru-style flanges available. Slide covers match painted flange colors. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu. cm.) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Includes two (2) Ortronics TracJack inserts, two (2) Ortronics Series II adapters and two Wiremold Open System adapters. Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Modular jacks sold separately. Black

Category: Assembled Recessed Round Boxes

For use with 10" [254mm] diameter hole. Cover and stem are pre-assembled together. All devices are recessed 4 1/2" [114mm} below the finished floor level. Unit ships complete with an all aluminum cover (assembled) designed to sit on top of finished floor surface (carpet, tile, wood, concrete or terrazzo). Covers are available in the following powder coated finishes: black (BK), gray (GY), nickel (NK), brass (BS) and aluminum (AL). The covers are also available in two plated finishes: brass (PB)

Category: Recessed Floor Box Service Fittings

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY), brushed aluminum (AL) and brass finish (BS). Aluminum and brass flanges standard with black cover. Aluminum flange also available with an aluminum colored nonmetallic cover (AA). Brass flange also available with brass colored nonmetallic cover (AB). Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Accepts single device 1.39" (35mm). NOTE: Standard size for device plates for Plate Location 3 is 5 7/32" (132mm) x 2 3/4" (62mm).

Category: Recessed Compartment Box Device Plates