Search results

ROB PR5338GR 2-1/2 STRAIGHT LT CONN W/GRND

Category: Straight PVC Coated Type LT Connectors

ROB PRUNF905SA 3-1/2 FEM-FEM UNION AL

Category: PVC Coated Female-Female Unions

ROB PRLR69 2 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

RRY PREYD5SA 1-1/2 AL EYD SEA

Category: PVC Coated Type EYD Sealing Fittings

PVC coated Form 8 conduit bodies with covers are offered in numerous configurations to provide a complete coated conduit system.Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

ROB PRNIP-AL-3X3-1/2 3X3-1/2 AL NIPPLE

Category: PVC Coated Nipples

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

Plasti-Bond PVC coated pipe straps are used to securely mount conduit to a wall or other structure for support. They are available in two styles: a one-hole malleable iron strap or a two-hole stamped steel strap. Mounting hardware not provided.

Category: PVC Coated Conduit Support Straps

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: Straight PVC Coated Type LT Connectors

ROB PBRA-3-1/2 3-1/2 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Conduit Body, Type: LR, FM8, Size: 2-1/2 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type LR Conduit Bodies

Rob-r Prlbd10900 4 Pulling El

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Rob-r Pr5339gr 3 Straight Lt

Category: Straight PVC Coated Type LT Connectors

Rob-r Prlr47 1-1/4 Form 7 Lr

Category: PVC Coated Type LR Conduit Bodies

Rob-r Pbc149-1-1/4 1-1/4 Pipe

Category: PVC Coated Conduit Support Straps

Rob-r Prc1089 4 Al Mark 9 C F

Category: PVC Coated Type C Conduit Bodies

Rob-r Pbc149-1 1 Pipe Strap

Category: PVC Coated Conduit Support Straps

RRYPBC1055 5" PIPE STRAP

Category: PVC Coated Conduit Support Straps

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRBUB4 1-1/4 BUB FITTING MOGUL

Category: PVC Coated Conduit Body Covers

ROB-R PRHNIP3X10 PVC NIP

Category: PVC Coated Nipples

Rob-r Preyd5 1-1/2 F/f Sealin

Category: PVC Coated Type EYD Sealing Fittings