"ab-10106rbg the austin co."

C-H XTCR007B21B XT IEC FVR CO

C-H XTCR050D11T XT IEC FVR CO

C-H XTCR025C21Y XT IEC FVR CO

KIL K12591-MG 1 1/4 90° LT CO

KIL GO25-3C3G SWT 3 POS SEL M

CRO X1677 MOUNTING SHELL W/CO

KIL GO-8673-BJE N.C. LATE BRE

C-H RPLPBCF NRX PADLOCK PB CO

KIL LR77 DURALOY7 2 1/2 LR CO

CRO CM3 CHAMP COVER CEIL 1 CO

Eaton toggle switch, #14-10 AWG, 15A, Commercial, Flush, 120V, Side wire, Screw, Ivory, Load type: Motor Control, Fan, LED, Incandescent, ELV, MLV, CFL, Flourescent, Halogen, Single-Pole, Single-Pole, Brass, Polycarbonate

Eaton residential grade duplex receptacle, #10 AWG, 15A, Residential, Flush, 125V, Side wire, Ivory, Brass, Thermoplastic, 5-15R, Duplex, Screw, Thermoplastic

BLI B2026DCU(1/2CT) 1/2-IN -

Provides remote signaling of breaker open/closed status. The aux switch mounts in right pole only on two-pole TEB breakers and is not available with ?B? suffix?leads out back.

Category: Molded Case Circuit Breaker Auxiliary Switches

APP STB4538SR 3/8" 45D INSUL

Category: Liquidtight Strain-Relief Grips with Mesh

APP ST-4538L 3/8 IN 45DEG LFMC CONN W/LUG

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Mtr/bkr 240v W/tb 200a 4 Pt, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - without Distribution

Trifurcating Kit, O.D.: 0.62 - 1.13". Used to Break Out and Seal a Transition From 3/C the three 1/C. To be used with 5700A-MT Series.

Category: Medium Voltage Cold Shrink Splice Kits

Pre-Insulated Service Entry Sleeves 3/0 - 1/0 AWG Pre-insulated service entry sleeves are used for fast and easy installation with standard tools. For combinations of aluminum-aluminum and aluminum-copper conductors. Meets the requirements of ANSI C119.4. Rated 600 Volts.

Category: Standard Barrel Aluminum Compression Sleeves

C-H MBX2040PV200BTS 1 IN TYPE, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - Solar Ready

The cable tie mount in white uses #6 (M3) screws or user supplied adhesive. It measures 1.12" long x 1.12" wide (28.5 x 28.5 mm). It is used with miniature, intermediate, and standard cable ties. It is made of nylon 6.6, which increases mechanical strengt

Category: Cable Tie Bases

C-H 35MM140R1240250 35MM-SING, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Commercial Meter Stacks

C-H 3MM412R12C 3MM-THREE-PHAS, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Residential Meter Stacks

Vinyl Terminal Kit in Steel BoxIncludes the following: (100) PV18-6LF; PV18-8LF; PV14-8LF; PV14-10LF; BSV18X; BSV14X; (50) PV10-10LF; BSV10X; (1) CT-100A tool; K-1000 box.

Category: Small Wire Terminal Kits