"ab-8824sw the austin co."

Power Line Communication Bridge for the Enphase Envoy ENV-120M.

Category: Solar Monitoring Accessories

APP STB-90150SR 1-1/2 IN 90D 90D LT INSULATED WIRE MESH STRAIN RELIEF

Category: Liquidtight Strain-Relief Grips with Mesh

Support Channel Kit (Rod Not Supplied), For Use to Prevent Bending of the Operating Handle Mounting Surface

Category: Circuit Breaker Mounting Kits

Peltor Optime 105 Dielectric Ear Muff, 30 dB Noise Reduction, Black/Red, Over-the-Head Band Position, ABS

Category: Safety Earmuffs

Deburring Tool, Diameter: 13/16", Chuck Size: 3/8", Maximum Deburring Depth: 10 GA

Category: Deburring Tools

Snap-In Blank, QuickPort, Color: White. Has Been Replaced By Leviton 41084-BW - Item #174584

Category: Snap-In Blank Inserts

Has Been Replaced By Leviton GFTR2-I20 Amp, 125 Volt Receptacle, Feed-Through, Tamper Resistant, SmartLock Pro Slim GFCI, Monochromatic, Back & Side Wired, Nylon Wallplate & Self Grounding Clip Included - Ivory. Has Been Replaced By Leviton GFTR2-I - Item #140604

Category: Tamper Resistant GFCI Receptacles

30 Amp, 2-Pole, Compact Definite Purpose Contactor, 600V Rated, Binding Head Screw Terminals, 277V AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 2-Pole Definite Purpose Contactors

Eaton 55 Series Photoelectric Sensor, Photoelectric, Right Angle, Sensor distance: Depends on the detector used, Body: Noryl, Lens: Nylon enclosure, 6.6 Ft. ( 2m ) Cable, 90-132 Vac input, Thu-Beam, 6 Ft. ( 1.8m )

Category: High Performance Photoelectric Thru-Beam Sources

A new blade design that delivers up to 100% longer blade life versus the prior generation of LENOX hacksaw blades. Bi-metal construction allows blades to bend and flex without breaking.

Category: Hacksaw Blades

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 4.000 Inches, Nominal Conduit Size 3-1/2 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

Made Of B-500 Repositionable Vinyl Cloth Material, Our Wm Series Wire Markers Are Able To Withstand Moderate Heat, Oil And Dirt. Labels Hold Tightly To The Wire Due To Their High Adhesion Properties And Can Be Re-used With Ease If Repositioning Is Requir

Category: Wire Marker Cards

16-14 AWG Vinyl Insulated Ring Terminal #10 Stud Vinyl ring terminals are basic tongue ring terminals. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. Vinyl insulated ring terminals are made of tin-plated copper with brazed seam, vinyl (PVC). 300V, 75 degrees C. FEATURES: STYLE: Standard MATERIAL: Vinyl QUANTITY: 25 Count WIRE SIZE: 16-14 AWG STUD SIZE: 10 LENGTH: 0.866 WIDTH: 0.334 BRAND EQUIVALENT: Burndy TP1410 Morris Products 01036 Ilsco 44213-B10 Penn Union R4B10

Category: Vinyl Insulated Ring Tongues

Replace The Numbers, Letters And Characters You Need In Your Porta-pack Books With Our Convenient Ten Pack Refills. Made Of Durable B-500 Vinyl Cloth Materialand Available In Over 250 Different Refill Packs. Each Refill Pack Contains 10pages.

Category: Wire Marker Cards

LevNet RF Wireless Decora Remote Switch, Dual Rocker, Self Powered, EnOcean 902MHz, Compatible With LevNet RF Receivers, (GSA Unique Part). Made In The USA, Title 24 Compliant, ASHRAE 90.1 Compliant, Gray

Category: Wireless Dimmers & Switches

30 Amp, 2-Pole, Compact Definite Purpose Contactor, 600V Rated, Binding Head Screw Terminals, 380 - 415 (50 Hz),440 - 80 (60 Hz) AC Coil. ***No Replacement Coils Available for the Compact Series***

Category: 2-Pole Definite Purpose Contactors

Converts VFD from Nema 1 to Nema 12. This kits is for Frame: FR1 480V. The kit includes New Nema 12 Cover, Fan, Base Plate, seal Plugs and Hardware.

Category: VFD Enclosure Kits

Quickmount EFM40mm Enphase Micro Inverter Bracket for LG 40mm Modules

Category: Solar Micro Inverter Components

Semiconductor & Chemical Pipe Markers Are Intended For Use On Small Diameter Piping Or Tubing In The Semiconductor & Chemical Industries. Made From B-946 Self-sticking Vinyl Wtih Permanent Adhesive, 28 Markers Per Card. Use With 1 Arrow Tape

Category: Detectable Underground Tape

The PW-200 passive infrared (PIR ) wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features. (grey)

Category: Dual Relay Occupancy Sensors

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

Brady 22965 Danger Sign danger "do Not Watch The Arc"

Category: Danger Signs

Labels are designed for permanent applications in severe indoor or outdoor environments. Special acrylic adhesive adheres strongly, making marker removal difficult. B-946 premium outdoor grade vinyl has superior abrasion resistance and strongly adhering ink system minimizes the effect of accidental scratches and scrapes. Labels are resistant to chemicals, oil, grease, water and mild solvents. Fade resistant ink offers UV protection for your outdoor applications. Black Helvetica Medium characters

Category: Facility Signs

Complete with one 3/4" and one 1 1/2" trade size conduit adapters and closure plugs. Covevrs available in painted black (BK), gray (GY), brass(BS), nickel (NK), bronze (BZ), and forged brushed aluminum (AL). Use with the 4FFSTC15 insert to form a complete poke-thru assembly. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 4FFATC Series Poke-Thru Devices require a 4" [102mm] diameter hole.

Category: Assembled Poke-Through Units