"connector waterproof"

NSI APS04 10 SOL - 4 STR ALUM

Category: Aluminum Split Bolts

NSI N-1/0 1/0 AWG COPPER SPLI

Category: Copper Alloy Split Bolts

10 Sol - 3/0 Str 360 Degree Swing Type Hub for Ground Clamps Threaded hub cast of high-strength, highly conductive bronze. Used with ground clamp with serrated hub to ground conductor to water pipe. Allows entry from any direction. Zinc plated steel screws.

Category: Ground Clamps With Hub

GROUND CLAMP HD 1/2-1IN

Category: Bare Wire Ground Clamps

NSI G-2-S "BRONZE GROUND CLAM

Category: Bare Wire Ground Clamps

Copper Isolated Ground Bar with 14 Circuits 2-14 AWG Isolated Ground Bars are made from either high-strength aluminum alloy 6061-T6 or high-conductivity copper as indicated below. The base is made from high-strength glass-filled polyester. Aluminum connectors are dual-rated for use with aluminum or copper cables.

NSI C-300 "TINNED COPPER SPLI

Category: Long Barrel Copper Compression Sleeves

Extra Heavy Duty Direct Burial Ground Clamp for up to 1in Pipe This incredible ground clamp can handle just about any size ground wire and just about any application. UL Listed for direct burial in earth and concrete, it can be used with rebar, water pipe, copper tubing and ground rods up to 1 inch in diameter. Assembled with tough, 304 stainless steel screws. Will accommodate ground wires from 8 AWG to 4/0 AWG. cULus Listed Grounding and Bonding.

Category: Bare Wire Ground Clamps

NSI G-2-S-DB DIRECT BURIAL BRONZE

Category: Bare Wire Ground Clamps

4 Port Panelboard Lug 350 MCM - 6 AWG Large size set screw connectors with multiple mounting holes for a secure, turn-prevent connection. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. For use with copper or aluminum conductors. 600V (2000V max, per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.75".

1/2IN REBAR CLAMP

Category: Rebar Ground Clamps

1 Port Aluminum Lug 300 MCM - 6 AWG Aluminum Single Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy. Electro-tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Temperature Rating 90 degrees C. Rated 600 volts (2000V max. per UL486B). UL 486A/B Listed. .

Large Nickel Screw Connect SPST Pushbutton Switch

Category: Appliance Pushbutton Switches

ON OFF - SPST - Medium Nickel Wire Connect Bat Toggle Switch

Category: 1-Pole Toggle Switches

2 Port Aluminum Dual Rated Transformer Lug 600 MCM - 2 AWG Aluminum Dual Rated Transformer Lugs are versatile and reuseable set screw connectors made of 6061T-6 aluminum alloy for superior electrical and mechanical performance. Two set screws per wire hole ensure an exceptional connection. Electro-tin plated for low resistance. For use with copper or aluminum conductors. Mounting hole spacing is NEMA 1-3/4". Meets or exceeds ANSI C119.4 Class A. Rated 600 Volts. Temperature Rating 90 degrees C.

Mechanical Crimp Tool with 5/8 Inch Nose Die APPLICATIONS: Designed for use with wide range and H-Tap connectors. It has fiberglass handles and comes with "O" and "D" Nose Dies. It has an output of 4.5 tons.

Small Nickel Screw Connect SPST Pushbutton Switch

Category: Appliance Pushbutton Switches

NSI UC-343 GRD CONN. 3" 250-2

Marker Plate, Nylon, Natural

Category: Male Non-Insulated Wire Disconnects

NSI UC-238 GRD CONN. 2.5" 250

NSI GP-250-0 250 MCM - 1/0 AW

Category: Aluminum Tap Lugs

Nsi Gp-350wc 350-4/0 Main tap 350-6

Category: Aluminum Tap Lugs

NSI GP-350 350 MCM PARALLEL T

Category: Aluminum Tap Lugs

NSI SOTZ350-8 350-6 8 CONDUCT