"qo240-1021 square d co"

TYPE C BTN EXTD BLACK SLOW

Category: Multi-Function Operator Buttons

Three Compartment Raised Access Floor Module, 150 Cubic Inches, Floor Cut Out Length 7-15/16 Inches, Width 7-15/16 Inches, Cover Size Length 7-5/8 Inches, Width 7-5/8 Inches, Depth 4 Inches, Galvanized Steel with Balck Cover

Category: Assembled Recessed Gang Boxes

Easy-Twist Standard Twist-On Wire Connectors - Standard Red Fiber Drum 22-10 AWG- 25000 Count APPLICATIONS: Easy-Twist Standard Twist-On Wire Connectors have a flame retardant UL 94V-2 thermoplastic shell that provides excellent electrical insulation. They have a temperature rating of 221 degrees F (105 degrees C). Their fixed, precise square wire spring provides secure gripping of conductors. Their deep skirt entry provides protection from flashover and shorts. Sure-grip ribs improve gripping comfort. Compact design ensures proper installation - especially in tight spaces. Threaded funnel entry guides the wires into the connector easily. Pre-twisting of wires is not necessary. 1,000 volt maximum in fixtures and signs. UL 486C Listed Wire Connector. For Copper Wire Only.

Category: Color Coded Wire Connectors

Floor Plate Assembly, Recessed, Single Receptacle with Box, 15 Amp Temper-Resistant Receptacle, Brass Plated

Category: Assembled Recessed Gang Boxes

CUT HT8SP31 STANDARD LEGEND, MARKED "RUN"

Category: 30mm Pushbutton Legend Plates

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. NOTE: Add suffix “TR" to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. "NA" indicates North American made and complies with the Buy American Act, NAFTA, and ARRA requirements.

Category: Square / Rectangle Recessed Box Covers

Recessed Floor Box, 2 outlets, Brass material, 8-5/8 x 5-1/16 x 4 in. Size, Silver/Gold, Water Tight construction, Bottom, Side cable entry, Floor Mount, 72 cu.in cubic capacity

Category: Assembled Recessed Gang Boxes

WMD WMFB1SRKS1B 1-GANG SINGLE

Category: Assembled Recessed Gang Boxes

Double Arming Bolt. Size: 3/4" Diameter, 22" Bolt Length. Hot Dip Galvanized, Rolled Thread Type. Each Furnished w/ 4 Square Bolts.

Category: Double Arming Bolts

30.5 Mm, Square Multifunction Pushbutton, Non-illuminated, Green Momentary Jumbo Mushroom Button Operator, No Light Unit

Category: 30mm Corrosion Resistant Pushbutton Operators

Eaton Crouse-Hinds series EFD circuit breaker, 20A, Bolted/ground joint cover construction, Feraloy iron alloy, Square D breaker, Single-gang, Single-pole, Dead end, 3/4", 120/240 Vac

Category: Explosion-Proof Assembled Switches

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Snap-In Receptacle, Straight Blade, Grounding, Square with Leads, Pkd/ 250/Leviton, Carton Bulk with Quick-Connect Tabs, Mounting Clip, One 6 Inch Green Ground Lead, 16AWG, Free End Stripped 1/2 Inch, Black

Category: 15 Amp Straight Blade Receptacles

Three-Gang, Brass

Category: Square / Rectangle Recessed Box Flanges

M12™ ¼” Impact Wrench, Anvil Size and Type: 1/4" Inch Square - Friction Ring, No Load IPM: 0-3,800, Torque: 450 in-lbs ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Impact Drivers

Double Arming Bolt. Size: 3/4" Diameter, 12" Bolt Length. Hot Dip Galvanized, Rolled Thread Type. Each Furnished w/ 4 Square Bolts.

Category: Double Arming Bolts

Includes single-gang box, one 15A, 125V tamper-resistant receptacle, and brass cover with two screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 2 1/8" W x 3 3/4" L x 3 7/8" D (54mm W x 95mm L x 98mm D) Device Plate: 3 1/8" W x 4 15/16" L

Category: Assembled Recessed Gang Boxes

Powder-coated aluminum power or communication plate, with 2" [51mm] and 3/4" [19.1mm] plugs. NOTE: Acceptable for use with threaded conduit when passing through power cables.

Category: Square / Rectangle Recessed Box Covers

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Bronze

Category: Square / Rectangle Recessed Box Covers

P & S FB1TRDRN

Category: Assembled Recessed Gang Boxes

Blanking Panel, Square Hole 19" Width for 3/8" Cage Nut Holes (May Be Used With or Without Cage Nuts Installed)

Category: Enclosure Back Panels

Eaton E34 pushbutton legend plate, E34 series, Square Legend Plate, Plastic, Black, Legend: RESET, 3/16 In high, Standard

Category: 30mm Pushbutton Legend Plates

Post Base, Double Column, Square, use With All 3 1/4" Channels, Material: Stainless Steel.

Category: Post Base Strut Channel Connectors

Eaton Crouse-Hinds series EFD circuit breaker, 20A, Bolted/ground joint cover construction, Feraloy iron alloy, Square D breaker, Single-gang, Single-pole, Through feed, 3/4", 120/240 Vac

Category: Explosion-Proof Assembled Switches

Floor Box Kit with Brass Cover, 2-Gang, (4) Flip Lids, Depth: 3.764 Inch, Includes: Steel Box, Brass Cover With (4) Flips Lids, Gasket, Receptacles and Mounting Screws

Category: Square Recessed Floor Boxes