"430-500"

HC Clamp Bundle Separator, Three Hole, PA66GFHIRHS, Black, 500/pkg

Screw Mount Cable Tie Base, 1.12" x 1.12", .18" Max Tie Width, .18" Hole Dia, PA66, White, 500/pkg

Dual Clamp Tie, 19.20" Long, .25" Stud Dia, 2.30" Max Bundle Dia, 150lb, PA66HIRHSUV, Black, 500/pkg

KIL ZN108CR-EX CONN 90DEG 1/2

IDE 84-9911 INSUL MALE DISC -

GRE F018627 SCREW 10-24X.50 F

36 PSIG, 5000 PSIG, Dual Sensor Pressure Calibrator. Pressure calibration and temperature measurement for custody transfer applications. The Fluke 721 Precision Pressure Calibrator with dual isolated pressure sensors is the ideal tool for gas custody transfer applications allowing you to take simultaneous static and differential pressure measurements with a single tool. The 721 can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).

CAD LPC128500 CABLE CU SMOOTH

PENN UNION IPC-500-350

KIL ZS209CR-EX CONN STR 3/4 .

KIL ZS208CR-EX CONN STR 3/4 .

Nylon Ring Wire Range 12-10 Bolt Hole #6, Package of 500

Nylon Insulated Ring Terminal, Length 1.00 Inches, Width .37 Inches, Maximum Insulation .210, Bolt Hole #10, Wire Range #12-#10 AWG, Color Yellow, Copper, Tin Plated, On Mylar Tape, 500 Pack

ABB KT7VD-S VARI-DEPTH SHAFT

Abb; Contactor; Mini-reversing, Compact; Coil Voltage: 24 Vdc; Contact Configuration: 3no (main) 1nc (auxiliary); Size: 96.5 Mm Width X 57.5 Mm Height X 46.5 Mmdepth; Operating Temperature: -25 To +55 Deg C; Operating Current: Ac-1: 20 Ampat 220/240/380/440 For 40 Deg C, 16 Amp At 220/240/380/440 For 55 Deg C, Ac-3: 9amp At 220/230/240/380/400 For 55 Deg C, 8 Amp At 440 V For 55 Deg C, 5.5 Amp At500 V For 55 Deg C, 3.5 Amp At 690 V For 55 Deg C; Tightening Torque: 7 In-lb; Wire Size: Stranded: (1 Or 2) 22 - 10 Awg; Voltage Rating: 12 - 690 Vac (main), 12 - 500 Vac/12 - 240 Vdc (auxiliary), 600 Vac (ul/csa); Endurance: Mechanical: 10 Million Cycles; Impulse Withstand Voltage: 6 Kv; Number Of Poles: 4; Enclosure: Ip20; Environmental Conditions: Maximum Operating Altitude Permissible: 2000 M, Storage Temperature: -40 To 80 Deg C, Resistance To Vibrations According To Iec 60068-2-6: 5 G / 5 - 150 Hz; Insulation Voltage: 690 V

Rigid Conduit Reducer Coupling, Large End Trade Size 2 Inch, Small End Trade Size 1 Inch, Material Zinc Electroplated Malleable Iron, Size 3 Inch Dia x 2 Inch L, Enclosure Class I Div 1 2 Group A B C D, Class II Div 1 2 Group E F G, Class III, Approval CSA C22.2, Applicable Standard NEC 500 to 503/505, Constructional Feature Dust Ignitionproof, Explosion-Proof, Used On Threaded IMC/Rigid Metal Conduit

ABB A1N050TW-2

Cord Grip Male 90-Degree, 3/4" NPT, 0.440"-0.500"

KIL ZS308 CONN STR 1 .375-.50

General Purpose Enclosed Control Transformer, 240x480 PV, 120x240 SV, 500 VA

Zee Support,use With Ps 200,ps 210 And Ps 500 2t3

Series G: Terminal Accessories (Line and Load End), Line and Load Terminals, Al Terminal, Cu/Al Wires, English Hardware, (4) 500-1000 AWG/kcmil Wire Range, 1600A, Used with R-Frame

Industrial Control Transformer,208/240/415 Volt Primary,24 Volt Secondary,50/60 Hz,277/480 Volt Primary, 24 Volt Secondary,60 Hz, 200/230/400 Volt Primary,24 Volt Secondary, 50/60 Hz,220/380 Volt Primary,23 Volt Secondary, 50/60 Hz,500 Continuous VA

SERVICE ENT SPLICES 5 1/2"