"tps clamp 10a/1a"

NSI TGE-250 6 SOL - 250 MCM T

Category: Transformer Ground Clamps

CDY MCS100B18 B-18-MCS100-Z B

Category: MC/AC Cable to Wire/Rod & Beam

Box Support,1/2&3/4 Conduit Plain Hole & B18co

Category: Snap Lock Pipe Hangers

Hanger,flange,clip 5/16 1/2 3/8 Thd

Category: Rod & Wire Hangers

Cable Snap Clip, Low Voltage, Data & MC/AC Cable To 5/16" Thru 1/2" Flange Thickness, 0.375"–0.437" OD

Category: Flange-Mount Cable/Conduit Clips

Adjustable screw gun box bracket for studs spaced between 17" - 26".

Category: Prefab Assemblies

Eaton Crouse-Hinds series NMC clamp type connector, Zinc die cast, 1-1/4"

Category: Zinc Die Cast NM Cable Connectors

BCSP Box/Conduit Securement Platform, 6"/8"/10"/12" Box Size, 3/8" Rod Size, Steel

Category: Enclosure Mounting Bracket Kits

MATS Conduit to T-Grid Clip, 1/2", 3/4" EMT, 0.709"û1.181" OD

Category: Acoustical T-Grid Ceiling Electrical Component Supports

Ground Clamp - Flat Face Iii-B-5 1.5" Jaw Opening

Category: Utility Pole Grounding Clamps

Parallel Groove Clamp, Copper, Conductor: 4 Sol. - 4/0 Str. (Either Groove)

Category: 2-Bolt Aluminum Tap Connectors

90° Junction Splice Clamp, Material: Steel, Finish: Black Zinc. Includes: (2) Clamps & Hardware.

Category: Cable Tray Splicer Kits

Cable Tray Ground Clamp, Copper Alloy, 2 to 2/0 AWG, Tin Plated, AL/CU Rated

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

BUR UCG25R2RS PARALLEL CLAMP

Category: Malleable Iron EMT Parallel Type K-Clamps

32625T62 STRUT MT VIBRATION CLAMP 1.25 INCH

Category: Rod & Wire Hangers

0200H1800W TS PLINTH ELEMENTS RAL7022T

Category: Enclosure Mounting Bracket Kits

M6 CAPTIVE NUTS W/O CONTACT PU=50

Category: Enclosure Mounting Bracket Kits

CP 60 BASE COUPLING HORIZONTAL OUTLET

Category: Enclosure Mounting Bracket Kits

Ridgid; Inductive Signal Clamp; Weight: 2 Lb

Category: Circuit Tracers

Abb; Machinery Drive; Wattage: 4 Kw; Voltage Rating: 380 - 480 Vac; Phase: 3; Frequency Rating: 48 - 63 Hz; Enclosure: Ul Open Type (ip20); Environmental Conditions: Ambient Temperature: -10 To 40 Deg C (14 To 104 Deg F), No Frost Allowed 50 Deg C (122 Deg F) With 10 Pct Derating; Altitude: Rated Current Available At 0to 1000 M (0 To 3281 Ft) Reduced By 1 Pct Per 100 M (328 Ft) Over 1000 To 2000 M(3281 To 6562 Ft); Relative Humidity: Lower Than 95 Pct (without Condensation);degree Of Protection: Ip20 / Optional NEMA 1/ Ul Type 1 Enclosure Ip66/ip67/ul Type 4x As An Option Up To 7.5 Kw, Ip69k Available For Ip66/ip67 Variant With Compatible Cable Glands; Enclosure Colour: Ncs 1502-y, Ral 9002, Pms 420 C; Contamination Levels: Iec721-3-3 No Conductive Dust Allowed; Transportation: Class 1c2(chemical Gases), Class 1s2 (solid Particles); Storage: Class 2c2 (chemical Gases), Class 2s2 (solid Particles); Operation: Class 3c2 (chemical Gases), Class 3s2 (solid Particles); Size: 169 Mm Height Without Fastenings And Clamping Plate X202 Mm Height With Fastenings But Without Clamping Plate X 239 Mm Height With Fastenings And Clamping Plate X 70 Mm Width X 161 Mm Depth; Base Drive Frame: R1;speed Control: Static Accuracy: 20 Pct Of Motor Nominal Slip; Dynamic Accuracy:< 1 Pct Sec With 100 Pct Torque Step; Weight: 1.200 Kg; Chokes: Ac Input Chokes:external Option For Reducing Thd In Partial Loads And To Comply With En/iec 61000-3-12, Ac Output Chokes: External Option To Achieve Longer Moto

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

3 Stud Clamp With Flange, Stainless Steel.

Category: Loadbreak / Deadbreak Bushings

S-5-B STANDARD CLAMP. This clamp is specifically designed for double-folded copper standing seam paneling.

Category: Solar Metal Roof Attachments

CDY 708GBSF

Category: Rod & Wire Hangers

Pressure Switch, Electromechanical, 10 Amp, 120/240 Volt AC, 250 Volt DC, 1000 PSI, 20 - 1000 PSI Range, 59 - 200 PSI Differential, NEMA 4/4X/13, 1-Pole Double Throw

Category: Pressure Limit Switch Pressure Sensors