"artpc-100"

100 Amp, 277/480 Volt 3py, Iec 309-1 & 309-2, 4p, 5w, North American-rated Pin & Sleeve Plug, Industrial Grade, Ip67, Watertight, - Red

Category: 100 Amp Pin & Sleeve Plugs

PEEBRM9LQST HI 0/100 SSH 8FT PEEBRM9LQST HI 0/100 SSH 8FT R8 120 EXB SCT LP835 F2/48 C210 ACG

RCMSMPG120824* SMPG1-208-2-4/2P(20A)2/2P(30 A)-1-100-100

AC Current Clamp 24 in, Model: i3000, Amperage Rating: 30/300/3000 AMP, Voltage Rating: 600 VRMS/VDC, Frequency Rating: 10 HZ - 50 KHZ (-3 DB), Measuring Range: 30 - 3000 AMP, 1/10/100 MILV/AMP Output, Operating Temperature: -20 To 90 DEG C (Head), -20 To 85 DEG C (Electronics), Impedance: 100 KOHM Minimum, Battery: (2) AA/MN 1500/LR6 Alkaline, Accuracy: 25 DEG C, Plus/Minus 1 PCT Of Range 45 - 65 HZ, Storage Temperature: -40 To 105 DEG C (Head), -20 To 85 DEG C (Electronics), CAT III 600 V, BS EN 61010-1: 2001, BS EN 61010-2-032: 2002, BS EN 61010-031: 2002, EN 61326: 1998 And A1, A2 And A3, For Use With Multimeters, Recorders Or Data Loggers

FXT # FIN0.50BK X 100

CTL-100 AMCI

AUXILIARY CIRCUIT BREAKER KIT 15A 100-200A

DWYER SFI-100-3/4

Abb 0231-212.23 Rc510 2x100 H or Standard 2 X 100

ABB 0232-208.11 RC65 100 X 7

PULS ML100.109 100W 100-120 /

PULS ML60.122 54W 100-240VAC

CPI 30013-100 BLOCK MOUNTING

DC Power Supply, 100 VA, 120 to 24 Vac and Switching 120 to 24 Vdc at 2.5 Amp, Metal Enclosure

Pilot Relay, 10 Amp SPDT, 10-30 Vac/dc/120 Vac Coil, NEMA 1 Housing, 100 pack

ABC 1.5A BUSS FA BK 100 BOX -R

LAPP U00100014 OLFLEX CLASSIC 100 3GO.5 21/3C

LAP 0028033 UNITRONIC 100 14X

LED 2FT LINEAR HI-BAY 165W 4000K 100-277V

Current Limiting Telecommunication Fuse, 30 A, 170 VDC, 100 kAIC Interrupt, Ferrule End Terminal

LEDI V5-SPEC-15-40-100

18/6 CL3R/CMR BC SHLD 300V

Dimmable 30W ELV Driver: Input Voltage: 100-130V AC, Output Voltage: 12V DC / 3-30W (non-dimming) 18-30W (dimming applications), Forward phase / Reverse phase / ELV / TRIAC, cETLus Listed (dry locations). Dimensions: 7-1/16”L x 2-3/8”W x 1-3/8”H.

Category: LED Driver Power Supplies

Flexible Grounding Strap 1/2in. - 100 Ft. Woven of high conductivity, annealed, tinned copper wire, this braided ground strap provides maximum flexibility and ease of handling when installing ground or shield continuity. This braid is used for shield and lead-sheath grounding and is easily soldered to lead, copper and tinned metals. It is also used for continuing the fault-carrying capacity of the cable shield as a jumper braid.