"pc-wpf-2ft etherwan systems, inc"

For mounting deeper devices such as TVSS receptacles, GFCI devices, and Pass and Seymour Activate inserts. Accepts 5507 Series Faceplates, 2A size Activate inserts, and Open System communication modules. Bezels included. For faceplate options, see 5507 Series Faceplates. Light Gray

Category: 2-Gang Raceway Device Brackets & Plates

For AC8850 and AC8105 Boxes. Includes three (3) 6A Wiremold CM Series Open System adapters. NOTE: AC8850 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

LevNet RF, 5-Wire 300W Relay Receiver, 24VAC, 315MHz, EnOcean, Title 24 compliant, ASHRAE 90.1 compliant *** Discontinued ***

Category: Radio Frequency Area Lighting Controllers

Plasti-Bond Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations. These fittings are available in several different configurations and with optional breathers and drains to accommodate installation in a variety of locations and positions. The EY, EYM, EYD and EYDEF styles of fittings are for installation in vertical conduit runs. The EYA, EYAM and EYSEF style fittings are for installation in either vertical or horizontal runs. The EZS and EZDM style fittings may be used in any angle of conduit run. These Plasti-Bond sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.

Category: PVC Coated Type EYD Sealing Fittings

Plasti-Bond Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations. These fittings are available in several different configurations and with optional breathers and drains to accommodate installation in a variety of locations and positions. The EY, EYM, EYD and EYDEF styles of fittings are for installation in vertical conduit runs. The EYA, EYAM and EYSEF style fittings are for installation in either vertical or horizontal runs. The EZS and EZDM style fittings may be used in any angle of conduit run. These Plasti-Bond sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.

Category: PVC Coated Type EYD Sealing Fittings

HOF AST483R SPLITTER TROUGH 4

Category: NEMA 1 Wire Trough

HOF AST5603R SPLITTER TROUGH

Category: NEMA 1 Wire Trough

Inserts to replace the standard double-bit 3 mm insert in the standard lock cover. This Inserts, LI, LI527 item measures 16x16x20mm with a material of Zamak, Triangle 8mm.

Category: Enclosure Key Inserts

HOF AST2124R SPLITTER TROUGH

Category: NEMA 1 Wire Trough

HOF AST484R SPLITTER TROUGH 4

Category: NEMA 1 Wire Trough

Protects against Knife Injuries on the Job, Cleanly Strips Cu RHW/RHH/USE Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

Wide Range Distribution Grip, EHS Wire, EHS Jaw Holds A Wide Range Of Cable From 0.162-Inch To 0.883-Inch (4.11 to 22.42 mm), 50-Percent Lighter Than The KT4600 Grip, One-Handed Design Makes For Easier Actuation, Alternating Sawtooth Jaw Geometry Provides Greater Grip Strength, Spring Closes Grip On Cable To Hold The Initial Position, Large Opening In The Handle Accommodates A Wide Variety Of Hooks On Hoists, Winches And Tackle Blocks, Max Safe Load Of 5000-Pounds (2268 kg)

Category: Power Cable Systems - Distribution Grips

LIQUID-TUFF™ UL Liquidtight Flexible Steel Conduit, 1-1/2 Inch Diameter, 50 Ft. Roll, White

Category: Liquidtight Flexible Metallic Conduit

Protects against Knife Injuries on the Job, Cleanly Strips Al THHN/XHHW Cable, Jacket Ejection Slot Enables Easy Material Removal, Prevents Jams

Category: Power Cable Strippers

Solar Label, FUEL CELL POWER SYSTEM LABEL, 4.12" X 2.0", VL, Orange, 10/pkg

Category: Solar Installation Labels

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

SLK15Y300L5 CABLE SUPPORT AIRCRAFT CABLE SUPPORT SYSTEM FOR LIGHT FIXTURES

Category: Speed Link

Modular TDX Panel Protector, 100 kA, 240 VAC Un, 3Ph? 3W+G Distribution System

Category: Panel Mount Surge Protection Devices

Eaton, Molded case circuit breaker accessory, Handle mechanism, Series C: Handle Mechanisms, Through-the-Door Handle Mechanism, Rotary Handle, 24 in. Shaft, NEMA 1/3R/12, Used with K-Frame

Category: Molded Case Circuit Breaker Operating Mechanisms

C-h Eop5t07 Nd Motor Opr W/pi

Category: Molded Case Circuit Breaker Operating Mechanisms

PVC coated device boxes and covers, available in several configurations, may be used in coated conduit systems to accommodate wiring devices, to serve as pull boxes for conductors, or to allow for splices and taps in conductors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated FD Device Boxes

LIFT HANDLE

Category: Enclosure Handle Kits

Liquidtight System, 90 Degree Male Liquid Tight Connector, 1 1/4", Non-Metallic, Black

Category: 90 Degree Non-Metallic Liquidtight Flex Connectors

Optional Folding Handle for Speed Systems Series 1542 Stripper

Category: Power Cable Stripper Accessories