"ab-242412sb the austin co."

Test + Map™ Remote #2 for Scout® Pro 3 Tester, Cable Tester Replacement Remote Identifies, Tests & Maps A Location In One Step When Used With The Scout® Pro & Commander® Series Of Testers (Sold Separately), Test voice (RJ11/12), data (RJ45) and video (coax F-connector) terminated cables

Category: Network Cable Testers

Replace The Numbers, Letters And Characters You Need In Your Porta-pack Books With Our Convenient Ten Pack Refills. Made Of Durable B-500 Vinyl Cloth Materialand Available In Over 250 Different Refill Packs. Each Refill Pack Contains 10pages.

Category: Wire Marker Cards

Test + Map™ Remote #5 for Scout® Pro 3 Tester, Cable Tester Replacement Remote Identifies, Tests & Maps A Location In One Step When Used With The Scout® Pro & Commander® Series Of Testers (Sold Separately), Test Voice (RJ11/12), Data (RJ45) & Video (Coax F-Connector) Terminated Cables

Category: Network Cable Testers

Side coupling used to connect a straight section or fitting to the side of a CleanTray Wireway run. This Side Coupling CleanTray, CT66SCSS item measures 6.00x6.00 inches with a material of SS304 finish Brushed.

Category: Cable Tray Reducers

With metric sizing, appealing design and a suit of accessories the MAS is a perfect global solution. This Single Door Enclosure Mild Steel, MAS with Plate, MAS1208040R5 item measures 1200x800x400mm with a material of Mild Steel color Light Gray.

Category: NEMA 4 Wall Mount Enclosures

To cover the upper front opening of ProLine Slope-Front HMI Enclosures. This Upper Front Cover for ProLine Sloped-Front HMI, PCS58F item fits 500x800mm with a material of Steel colored Lt Gray.

Category: Rack End Panels

With metric sizing, appealing design and a suit of accessories the MAS is a perfect global solution. This Single Door Enclosure Mild Steel, MAS with Plate, MAS0608030R5 item measures 600x800x300mm with a material of Mild Steel color Light Gray.

Category: NEMA 4 Wall Mount Enclosures

ABB LY16-4 Connecting Strip, Shrt.br, af09-16, 3 Pole

Category: Terminal Block Jumper Bars

For jointing two horizontal tubes together and creating a pivot for the arm to rotate 300-degree. This Syspend 180-Max Intermediate Joint, S1MIJG item measures 7.64x11.42x3.94 inches with a material of Aluminum colored Lt Gray.

Category: Industrial Consolet Mounting Accessories

A rigid steel pedestal with die-cast aluminum base and mounting holes for bolting to the floor. This Bolt-Down Pedestal, AP23B44LG item measures 23.00x4.00x4.00 inches with a material of Steel color Lt Gray.

Category: Industrial Consolet Pedestals

Single-gang device plate that accepts standard 20A duplex receptacle or a duplex Turnlok receptacle. Fits in any one (1) of the shaded locations shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

These bits work with all Klein Tools 2-in-1 (67100), 10-in-1 (32477), 11-in-1 (32500) and 10-Fold (32535-32539) Screwdrivers. Precision-machined tips for exact fit into the fastener. Includes two bits with T6 and T7 TORX® tips.

Category: Multi-Bit Screwdrivers

Gooseneck Camera, 6 mm X 1 m, IP67 Waterproof & Dustproof, Compatible With The ET500 & ET510 Borescopes, Includes Camera Attachments: Mirror, Magnet & Camera Guide ***Discontinued***

Category: Cordless Inspection Camera Accessories

2-1/2" Mast Set Screw Model Allows The Installer To Cut Their Rigid Conduit To Any Length

Category: Mast Guying Kits without Wire

This box has a 4" (102mm) depth design with an extra 2" (51mm) of width for additional wiring capacity. These boxes can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication adapters for up to 12 ports of activation. Lids can be rotated 180¦ for easy orientation. Gray lids are die-cast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP2535 item fits 250x350mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Back Panels

Install HMI components or add holes and cutouts to the Front Plate for Concept HMI Enclosure. This Replacement Front Plate for Concept HMI, CPFP3235 item fits 320x350mm with a material of Aluminum colored Lt Gray.

Category: Enclosure Back Panels

Front/Rear Plinths, PF allow cabling without any restrictions and creates extra space under the enclosure. This Front/Rear Plinths, PF, PF1060 item measures 100x598x63mm with a material of Zinc Plated, Mild Steel, color Umbra Gray.

Category: Enclosure Housing Bases

With metric sizing, appealing design and a suit of accessories the MAS is a perfect global solution. This Single Door Enclosure Mild Steel, MAS with Plate, MAS0606040R5 item measures 600x600x400mm with a material of Mild Steel color Light Gray.

Category: NEMA 12 Hinge Cover Junction Boxes

The epoxy applied cable tie mount kit in black is made of two-part epoxy and nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It includes 1 epoxy cup, 1 mixer stick, 3 EMS mounts, and 3 cable ties. It is used with m

Category: Cable Tie Bases

Panduit Contour-Ty® Cable Ties are designed to provide consistent strength in high-vibration environments. Plus, with a low-profile head and parallel entry design, the tip enters easy and stays snug and snag-free. And with Weather Resistant Nylon 6.6 mate

Category: Non-Releasable Cable Ties

The closed cable tie connector ring in black is made of heat-stabilized nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is 0.57" long x 0.36" wide (14.5 x 9.1 mm) and is used with miniature, intermediate, standa

Category: Cable Tie Bases

The Panduit Pan-Steel® Strap is designed to maintain a safe, secure connection. Built with 304 AISI stainless steel with a fold-over lock, it is ideal for indoor and outdoor conditions. Low-profile buckle, 37"L (940mm), 0.5" (13mm), Tensile Strength: 2979

Category: Non-Releasable Cable Ties

Super-Grip® Cable Ties are designed with high strength and flexibility to tightly grip bundles and resist lateral movement despite the rough conditions of MRO and construction environments. Plus, with weather-resistant Nylon 6.6 material, it's ideal for i

Category: Non-Releasable Cable Ties