"uld-300 electronics corporation"

P5510 PNEUMATIC CALIBRATOR, 2 MPA (300 PSI), 1 GAUGE

PRESSURE MODULE -14 TO 300 PSI

PRESSURE MODULE 0 TO 300 (0 TO 20 BAR) (0 TO 2000 KPA)

AMP UT-300 TRANSMITTER

The Fluke 717 Pressure Calibrators deliver outstanding performance, durability and reliability. These calibrators are compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 717's are easy to use. Calibrator -12 to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.4 kPa ). Includes protective yellow Holster with test lead storage, instruction sheet, single 9V alkaline battery, test leads and alligator clips, NIST-traceable calibration report and data.

FLU FLUKE-718EX-300 I.S. PRESSURE

The Fluke 3000 FC Wireless Test Tools are a team and the modules are team players. You connect any of the Fluke ConnectÖ Modules to your test point and then view the results on specific Fluke Connect enabled hardware or through Windows« software on your PCùup to 20 meters (65.6 feet) away. Save time and conduct more tests with less trips. Fluke t3000 FC Wireless K-Type Temperature Module. A versatile K-type thermocouple thermometer wirelessly relays measurements to other Fluke ConnectÖ enabled master units, listed below: Fluke 3000 FC DMM Fluke Ti200/300/400 Infrared Camera PC via optional pc3000 FC Adapter Fluke Connect Mobile app

METROLOGY WELL: Lightweight, portable, and fast Insert A, imperial misc. holes , 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics. Includes test leads, and 6-pin DIN connector for reference probe.

FLU FLUKE-750P27 PRESSURE MODULE 0 TO 300 (0 TO 20 BAR) (0 TO 2000 KPA)

METROLOGY WELL: Lightweight, portable, and fast Insert B, imperial comparison holes, 50 DEG C to 660 DEG C, w/ 9144-INSX, w/ process electronics.

Handheld Rotational Speed Tester, Flash Frequency Range: 30 to 300,000 FPM. Includes external trigger connector and protective case.

Category: Motor Rotation & Phase Sequence Indicator Kits

Fluke 754 Documenting Process Calibrator, 5.4" x 9.6" x 2.5"

Category: Process Meters

AC Current Clamp-On Probe, Model: i1000, Voltage Rating: 600 VAC Maximum, Amperage Rating: 1000 AMP, 2000 AMP (Maximum Non-Destructive), 0.1 AMP (Lowest Measureable Current), Measuring Range: 10/100/1000 AMP At Nominal Current, 0.1 - 10/0.1 - 100/1 - 1000 AMP At Continuous Current, Accuracy: 1 PCT Plus 1 AMP (48 - 65 HZ) ( percentage Reading Plus Floorspec), Enclosure: IP40 (IEC 529), Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output Cable, Operating Temperature: -10 To 50 DEG C, Storage Temperature: -40 To 71 DEG C, Dimensions: 4.37 IN Width X 8.5 IN Length X 1.77 IN Depth, CAT III 600 V, CAT IV 300 V, For Use With Multimeters With Optional PM9081/001 BNC/Banana Adapter And Oscilloscopes

FLU 2249-K-300 BNC (M) RG174/

36 PSIG, 5000 PSIG, Dual Sensor Pressure Calibrator. Pressure calibration and temperature measurement for custody transfer applications. The Fluke 721 Precision Pressure Calibrator with dual isolated pressure sensors is the ideal tool for gas custody transfer applications allowing you to take simultaneous static and differential pressure measurements with a single tool. The 721 can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).

Voltage Quality Recorder, Wattage: 2.5 WTT, Voltage Rating: 70 - 300 V, Frequency Rating: 50 HZ Plus/Minus 1 HZ and 60 HZ Plus/Minus 1 HZ, Logging Memory: Yes, Phase: Single, Enclosure: IP40, Dimensions: 1-1/2 IN Height X 3 IN Width X 5.2 IN Length, Communications: USB 1.1 And USB 2, Environmental Conditions: Operating Temperature: -10 To 50 DEG C, Storage Temperature: -20 To 60 DEG C Operating Humidity: (0 DEG C to 30 DEG C) Max 95 PCT RH 30 DEG C To 40 DEG C) Max 75 PCT RH 40 DEG C To 50 DEG C) Max 45 PCT RH, Class 2, MIL-PRF-28800F, IEC 61010-1, IEC 61326-1

FLU FLUKE-700GA27 PRESSURE GAUGE 300 PSIA

Lvd1 Is A Non-contact Ac Voltage Detector And Led Flashlight Combined In One Convenient, Compact Design. With Exclusive Dual-sensitivity - The Voltage Detectorglows Blue When It's Near Ac Voltage, And Glows Red When It's At The Source. Detects Voltages From 40 V Ac To 300 V Ac. Voltage Detector Glows Blue 50 Hz - 60 Hz Or 2.5 - 38 Cm (1 - 5 In) Away From Source. Operating Temperature 0 C To 50 C.ultra-bright White Led With 100,000 Hour Bulb Life. Aaa Battery Included.

Category: Voltage & Continuity Testers

Extended Fine Point Tip Adapter Set, Model: 8845a, Voltage Rating: 300 Vrms/vdc,amperage Rating: 3 Amp, Diameter: Tip: 0.08 In Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, Ul94 V-2 Fire Retardant, Color: One Red And One Black, Iec 1010-2-0331, Category Ii, P2 Compliant

Category: Electrical Tester Accessories