"3036avbb emerson professional tools llc"

Opt-X Light Fiber Tool Kit

Category: Fiber Optic Termination Consumables

Kle 5118c LiNEMAns Tool Pkt

Category: Tool Pouches

Large Range Jumper Clamp, Main Line Range: 954 ACSR (Maximum), 6 Sol / .162 Diameter (Minimum), Jumper Cable Range: 4/0 AWG @ 15 kV, 2/0 AWG @ 25 kV, 1/0 @ 35 kV (Maximum), 2 AWG @ 15 kV (Minimum), Weight: 2.7 lbs.

Category: Cutout Bypass Tools

15/25KV Elbow & Cap Pulling Tool. For Use In Removing Seized Elbows and Protective Caps.

Category: Loadbreak Probe Wrenches & Bushing Insert Tools

Socket Set Includes The 5-In-1 Impact Socket (Cat. No. Nrhd) And The 2-In-1 Slotted Impact Socket Set, 12-Point, 6-Piece (Cat. No. 66090), 5-In-1 Impact Socket Features Three Square Socket Sizes: 3/4-Inch, 1-Inch And 1-1/8-Inch (Cat. No. Nrhd), Alignment Slot To Tighten And Loosen Most Pole Hardware, 7/16-Inch Hex Quick-Change Adapter Included, Twelve Sizes Combined Into Six Sockets Including: 1-1/8 X 15/16-Inch, 1 X 13/16-Inch, 7/8 X 11/16-Inch, 3/4 X 9/16-Inch, 5/8 X 7/16-Inch, And 1/2 X 3/8-Inch (Cat. No. 66090), Single-Ended Impact Socket Wrenches With Hands Free Adjustment Between Socket Sizes, Two Coaxial Spring Loaded Sockets In One Tool

Category: Sockets & Socket Sets

Drop Point Blade Pocket Knife Is Made Of D2 Tool Steel For A Durable And Long Lasting Edge, Ambidextrous Crossbar Lock For Opening And Closing, Large Thumb Hole For Multiple Quick Action Opening Techniques, Reversible Deep Carry Pocket Clip For Ambidextrous Hold, Ergonomic Jimping On Top And Bottom For Excellent Grip, Choil On Blade For Easy Sharpening, Lanyard Hole For Drop Prevention

Category: Folding & Lockback Knives

Tool-less Shelf provides support surface for equipment mounted in a 19in rack. This Tool-less Shelf, D19FVT912G item fits 900-1200mm deep with a material of Steel colored Lt Gray.

Category: Rack Shelves

COAX PUSH-ON CONNECTOR INSTALLATION & TEST KIT

Category: Datacom Tool Kits

Termination Kit, Includes: Crimper, Stripper, Scissors, Connectors, Cat3/5/5e/6

Category: Datacom Tool Kits

Combinations Jumper, Extender/Holder, 16" Fiberglass Shaft, Solid Copper Contact Bar. Weight: 2.75 lbs.

Category: Cutout Bypass Tools

Long Reach Pliers With Extended 13-Inch Reach Allows Better Access In To Tight And Small Spaces, Double Rivet Design Results In Jaws Opening More Than The Handles, Angled Knurl Jaw Pattern Provides Superior Grip On Workpiece, Hardened Alloy Steel Brings Durability And Long Tool Life, Molded Grips Provide Comfort And Contour For Precise Control, Bent Jaw Design Allows Grabbing Of Workpieces Around Objects, Engineered By Klein Tools For Peak Performance

Category: Stork Beak Pliers

Hollow-Shaft Nut Driver With A Standard 1/4-Inch Hex Socket, Heavy-Duty Shaft And Handle To Withstand The Torque For Demanding Applications, Through-Handle, Full Hollow Shaft For Torquing Hex Nuts Onto Threaded Rod Of Any Length, Cold-Forged Steel Wrench-Assist Hex Shaft For Heavy-Duty Applications, Color-Coded And Dome-Stamped Handle For Easy Identification Of Different Sizes, Rare-Earth Magnet Protected By A Brass Inner Sleeve And Strike Plate To Prevent Damage To The Magnet, Cushion-Grip™ Handle For Greater Torque And Comfort, 6-Point Hex To Maximize Driving Contact Area On The Fastener

Category: Magnetic Tip Hollow Shaft Nut Drivers

Cable Splicer Knife Holder, Tunnel Connect, Stitched and Riveted Leather Construction for Extra Durability, Designed to Hold Klein's Cable-Splicer's Knife (Cat. No. 44200), Slotted to Fit Belts up to 2-1/4 Inches wide.

Category: Tool Holders

Turbo Fan Fits On Klein Tools Safety Helmets And Hard Hats With Secure Metal Clip Or Via Klein Tools' Front/Back Mount, Dual-Mount Strap (Cat. No. 60949) Is Sold Separately And Is Designed For Use On Hard Hats Or Safety Helmets Without Klein Tools' Front/Back Mount, Compact, Lightweight, Low Profile Design And Quiet Operation For Long-Term Comfort, Three Selectable Modes With Long Run Times: 12-Hour On Low; 8-Hour On High; 6-Hour On Turbo, Adjustable Vent Focuses Airflow Down On Neck Area Or Up Under Shell, Hinged Bracket Retracts Into Storage Position When Not In Use, Or Extends To Desired Cooling Position, Rechargeable Modular Battery (Cat. No. 29025) Can Be Swapped With Spare For Extended Runtime (Not Included)

Category: Hard Hats

For removing cover of 1500 and 2600 Series Overfloor Raceways.

Category: Raceway Tools

Gre K30gl Wire Ferrule Crimp tool 25-10 Awg

Category: Wire Crimping Tools

10" Saw Chain

Category: Cordless String Trimmers, Pole Saws, & Hedge Trimmers

30.5 Mm, Metallic Heavy-duty Accessory - Button And Lens Removal Tool, Used Withall Illuminated Operators (except E30b Operators)

Category: Pilot Device Tools

SIMPush 1-1/2" & 2" EMT, Push Connect Removal Tool

Category: EMT Push Connect Removal Tools

M4™ 1/4" Hex Screwdriver Kit, (1) M4™ 1/4" Hex Screwdriver (2101-20), (1) M4™ Charger(48-59-2001) & (1) M4™ 2.0 Battery (48-11-2001)

Category: 4 Volt Cordless Screwdrivers

20V Max XR® Brushless Deep Cut Band Saw, Max Capacity (Rectangular): 5 X 4-3/4 in, Max Capacity (Round): 4-3/4 in, ***Bare Tool Only, Battery & Charger Sold Separately***

Category: Cordless Heavy Duty Band Saws

PAR38 Professional Series 120W Replacement 17W 2700K 15° Spot LED Bulb

GRE PA1360 FERRULE CRIMPER

Category: Datacom Compression Tools

60V MAX* 17 Inches, Brushless Attachment Capable String Trimmer (Bare Tool), Includes: (1) DCST972 String Trimmer, (1) 0.080 Line Pre-wound in Spool & (1) Auxiliary Handle and Guard ***Battery & Charger Sold Separately***

Category: Cordless String Trimmers, Pole Saws, & Hedge Trimmers