"k90-12/2"

7/16-Inch Combination Wrench, 12-Point, 6.625-Inch Overall Length

Category: Combination Wrenches

Anchorage Connector 24" Cable Pigtail W/12" Adjustable Rope Lanyard, 7 to 12 Feet.

Category: Safety Lanyards

Canvas Bucket, Leather Bottom, Connection Points, 12-Inch

Category: Canvas Tool Bags

5/8-Inch Standard 12-Point Socket, 3/8-Inch Drive

Category: Sockets & Socket Sets

Zipper Portfolio Bag, White No. 10 Canvas, Dimensions H x L: 12" x 17"

Category: Small Parts Bags

Cold Chisel 1/2-Inch Blade, 6-Inch Length, Cuts, shapes and removes metal

Category: Chisels

Cable Length Meter Measures Length of Electrical, Data, Two-Wire and NM-B® Cables Up to 3000 Feet (914 m), TDR Technology Measures Distance-to-Fault, Open or Short, on Terminated or Unterminated Cable, Programmed With Velocity of Propagation (VoP) Values for Coax, Data, NM-B® and Other Multiwire Cables for Accurate Length Measurement Within +/-(2-Percent Plus 3-Foot/0.9 m) Accuracy, Stores Custom Cable VoP Values for Consistently Accurate Results and Time Savings, Simple Interface With Full Color, Interactive LCD, Tones Unenergized, Open-Ended Wires For Wire Tracing (Requires Analog Probe (Cat. No. VDV500-123, Sold Separately), Coax-BNC or High Quality Alligator Clips for Quick, Easy Connection to Test Most Cable Types, RJ45 Jack for Accurate Length Measurement of Terminated Data Cables, Measurements Can be Switched Between and Metric and Imperial Units, Includes (2) AA Batteries, Padded Carrying Case and Leads

Category: Cable Length Meters

Rechargeable 2-Color LED Flashlight With Holster, Rechargeable Flashlight Is 3 Lights In 1: A Focused, Long-Range White Spotlight, Wide, White Floodlight, And Low-Intensity Red LEDs, Includes: Rechargeable Flashlight, Carrying Holster, USB-C Charging Cable, Removable Pocket Clip & Instruction Manual

Category: Pocket / Key Chain Flashlights

Tin Snips, 12", Cutting Capacity: 24 Gauge Steel, 28 Gauge Stainless Steel, Cutting Length: 3.5"

Category: HVAC Sheet Metal Tools

18-Inch Cast Iron Pipe Wrench With Lightweight, Durable I-Beam Handle Design, Optimized Jaw Design For No-Slip Grip During High-Torque Application, Adjustable Jaw Extends To Fit 2-1/2-Inch (6 Cm) Pipes, Contoured Handle For Secure Hold, Twist-Knob With Knurling For Easy Size Extension, Easy-To-See Markings For Accurate Size Setting, Hang-Hole For Convenient Storage

Category: Pipe Wrenches

Metric Hex Bit Set Includes Essential Bit Socket Sizes 2 Mm Through 14 Mm Housed In A Modbox™ Case, Optimized Square Drives For The Application; 1/4-Inch Drive Sockets For Precise Work, 3/8-Inch Drive For All Around Work, And 1/2-Inch Drive For High Torque Applications, Knurling At Base Of Each Socket Provides Greater Grip When Starting Fasteners By Hand, Sping-Loaded Latch To Easily Open And Close The Case With One Hand, Bold Stamped Size Markings For Quick And Easy Size Identification, Case Has Clear Lid For Quick And Easy Tool Identification, Along With Embedded Small Parts Storage Tray, Compact, Modular Storage System Is Designed To Nest Neatly Within The Klein Modbox™ System

Category: Sockets & Socket Sets

#2 Phillips Demolition Driver, 4-Inch Shank, Engineered, manufactured and tested for prying and chiseling

Category: Phillips Tip Screwdrivers

90-Tooth Pass Through Socket Wrench For Driving Hex Nuts On Extended Threaded Rods, Included 3/8-Inch Square Drive Adapter Allows For Use With Traditional Sockets, Compact Design With Slim Profile Pass Through Head For Easy Access In Low Clearance Areas, Easily Switch Between Ratcheting On (Clockwise) And Off (Counterclockwise) With Clearly Labeled Selector Switch, Contoured Handle Provides A Comfortable Grip

Category: Ratcheting Box Wrenches

Hollow-Shaft Nut Driver With A Standard 1/2-Inch Hex Socket, Heavy-Duty Shaft And Handle To Withstand The Toque For Demanding Applications, Through-Handle, Full Hollow Shaft For Torquing Hex Nuts Onto Threaded Rod Of Any Length, Cold-Forged Steel Wrench-Assist Hex Shaft For Heavy-Duty Applications, Color-Coded And Dome-Stamped Handle For Easy Identification Of Different Sizes, Cushion-Grip™ Handle For Greater Torque And Comfort, 6-Point Hex Socket To Maximize Driving Contact Area On The Fastener

Category: Heavy Duty Nut Drivers

Hollow-Shaft Nut Driver With A Standard 1/2-Inch Hex Socket, Heavy-Duty Shaft And Handle To Withstand The Torque For Demanding Applications, Through-Handle, Full Hollow Shaft For Torquing Hex Nuts Onto Threaded Rod Of Any Length, Cold-Forged Steel Wrench-Assist Hex Shaft For Heavy-Duty Applications, Color-Coded And Dome-Stamped Handle For Easy Identification Of Different Sizes, Rare-Earth Magnet Protected By A Brass Inner Sleeve And Strike Plate To Prevent Damage To The Magnet, Cushion-Grip™ Handle For Greater Torque And Comfort, 6-Point Hex To Maximize Driving Contact Area On The Fastener

Category: Magnetic Tip Hollow Shaft Nut Drivers

Back Pocket Tool Pouch, Dimensions: 10" x 5-3/4" x 2-1/2", Pockets: 6, Material: Leather.

Category: Tool Holders

1/2-Inch Deep 6-Point Socket, 3/8-Inch Drive

Category: Sockets & Socket Sets

2-IN-1 SOCKET 5/8 X 7/16-INCH

Category: Sockets & Socket Sets

Parallel Jaw Grip 2-1/2-Inch Length, Designed With A Round Inside-Jaw Contour For Maximum Contact To Minimize Conductor Damage

Category: Utility Pole Dead End Grips

Forestry Kit Includes Klein Tools Type-2 Vented Safety Helmet, Mesh Face Shield And Klein Safety Helmet Earmuffs, Compact, Lightweight Safety Helmet With Low Profile For Unobstructed Visibility And Vents To Control Air Circulation, This Ansi Z89.1-2014 (R2019) Class C Type-2 Safety Helmet Is Tested For Top/Front/Back/Side Impact, Breathable, Washable Padded Sweat-Wicking Sweatband And Top Pad Improve Comfort, Face Shield Designed With Lightweight Materials And Proper Balance To Reduce Neck Fatigue, Full Face, Wrap Around Design With High Clarity Mesh Cross Weave Tested For Minimal Distortion; Ensures Uncompromised Vision, Face Shield Has Superior Impact Protection Tested To Latest Ansi Z87.1 Impact Standards, Earmuffs Designed Specifically For Use With Klein Tools Safety Helmets; 26Db Nrr (Noise Reduction Rating), Soft Foam Ear Cushions Offer Effective Acoustic Seal And All-Day Comfort, Designed With Pivot Positions On Earmuff Connector For In-Use, Stand-By, And Storage Positions

Category: Hard Hats

Replacement Fixed Blade Set for the Ratcheting Cable Cutter (Cat. No. 63060 purchased before August, 2017). Set includes: Fixed cutting blade, 2 grooved fasteners, 2 hex socket screws, moveable handle pivot pin, snap ring.

2-in-1 Impact Socket, 6-Point, 3/4 and 9/16-Inch

Category: Sockets & Socket Sets

Reciprocating Saw Blades, 12 Inch

Category: Bi-Metal Reciprocating Saw Blades

Full-Frame Finish-Cut Hacksaw, 12" Blade, 32 TPI

Category: Hack Saws