"it-4"

16-14 AWG Vinyl Insulated Ring 1/4"Stud - 100 Per Pack

Category: Vinyl Insulated Ring Tongues

NSI HWHS6-40-9 6-4/0 AWG HEAV

Category: Heavy Wall Heat Shrink

Vinyl Insulated Spade #4 Stud, 22-18 AWG, 300 Volt, Red, 100 Per Pack

Category: Vinyl Insulated Block Fork Terminals

Tap Connector for Copper to Copper, 350 MCM - 4/0 STR Main, 350 MCM - 4 SOL Tap, 600 Volt, Bronze

Category: 2-Bolt Bronze Tap Connectors

NSI APS04 10 SOL - 4 STR ALUM

Category: Aluminum Split Bolts

NSI N-4L 4 AWG 3 WIRE COPPER

Category: Copper Alloy Split Bolts

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 6, Wire Range: 4 AWG - 500 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

(1) 350 Mcm - 6 Awg Primary (6) 4-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 4 AWG - 3/8" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

NSI PL1/0-4 1/0-14 AWG UNINSULATED

Insulated Cable Connector Block for 2-Wires and In-Line Splicers/Reducers, 600V, Connections: Opposite Sides, Number of Ports: 2, Wire Range: 6 AWG - 4 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors in Direct Burial and Submersible Applications.

Category: In-Line Splicers/Reducers - Submersible

Copper Multiple Connector 4-14 AWG 15 Hole Copper multiple connectors are made copper and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper wire only.

Category: Bus Bars

NSI L4NP #4 AWG MAX WIRE SIZE

Category: 2-Hole Long Barrel Copper Compression Lugs

ground Clamp 1.25" - 2" Water Pipe, 3/4" Conduit Hub, 2/0 Ground Max

Category: Bare Wire Ground Clamps

(1) 500-6 Primary (12) 4-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

1/4" Bronze Flat Washers Corrosion resistance and physical strength combine to provide reliability.

NSI 4-14-515 L 42MM X W 9.50

Aluminum Multiple Connector 4-14 AWG 9 Hole Multiple connectors are made from eithercopper or aluminum bar and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper or aluminum conductors.

Compression Lug, Copper, 2 AWG, Inspection Hole, 1/4 Inch Bolt Size, Brown Color Code

Category: 1-Hole Copper Compression Lugs

NSI L40N-141 4/0 AWG MAX WIRE

Heavy Duty 1 Cable Parallel Ground Connector for 1/2-3/4in 2/0-4 AWG. Pipe Made of high-copper-content alloy for grounding to 1/2" - 1" ground rods and ground pipes from 1/4" - 3 1/2" in parallel or 90 degree position. Suitable for direct burial in earth and concrete. Nuts and lockwashers are silicon bronze.

4 Port Panelboard Lug 350 MCM - 6 AWG Large size set screw connectors with multiple mounting holes for a secure, turn-prevent connection. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. For use with copper or aluminum conductors. 600V (2000V max, per UL486B). UL 486A/B Listed. Temperature rating 90 degrees C. All hole spacing is NEMA standard of 1.75".

NSI 4-14-32 ALUMINUM MULTIPLE

NSI 4-14-63 ALUMINUM MULTIPLE