Search results

OZ-Gedney Type 14-S Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 1-13/16 IN, 3/8 IN Mounting Hole Width, 1 Holes, 3/8 IN Width, Trade Size: 1-1/2 IN, Dimension A: 3-7/8 IN, Applicable Third Party Standards: Federal Specification FF-

Category: Malleable Iron 1-Hole Conduit Straps

2-1/2 AND 3 IN FORM7 CAST CVR

Category: Steel Conduit Body Covers

OZ-Gedney Type 4Q Liquid Tight 90 DEG Connector, Size: 1-1/4 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 2-1/4 IN Width, Dimension A: 2-3/4 IN, Dimens

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1/2 - 29/32 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-9/16 IN Length X 1-7/8 IN Width, Third Party C

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3 IN, Connection: Compression X MNPT Hub, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 4-13/16 IN Maximum Diameter X 2-7/16 IN Length, 1 IN Thread Length, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit

Category: Rigid Compression Connectors - Iron

OZ-Gedney Type SG Solid Cover Sealing Gasket, Trade Size: 1 IN, Velbuna Composition, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Fiber Conduit Body Gaskets

OZ-Gedney Type TX Expansion Fitting, Trade Size: 3 IN, 5.38 IN Outside Diameter, Flexibility: EMT Conduit, Third Party Certification: UL 14895, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For EMT Conduit

Category: Steel EMT Expansion Fittings

OZ-Gedney Tray-Bond Type CTC Cable Tray Clamp, Trade Size: 1 - 1-1/4 IN, Malleable Iron, U-Bolts And Nuts: Steel, Finish: Mechanically Galvanized, 115 LB-IN Recommended Installation Torque, 5/16-18 UNC U-Bolt And Nut, Dimension W: 2-7/8 IN, Dimen

Category: Conduit To Cable Tray Adapters

OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-3/4 IN Body Diameter X 7-1/4 IN Overall Length, 3-1/4 IN Turning Radius, 1 LB 3 OZ Sealing Compound Required, 1-1/2 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, CSA 009795 Suitable For Wet Locations, UL Listed Using: O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, CSA Certified Sealing Compound, Class I, Division 1, 2, Groups B, C, D, Class I, Zone 1, 2, Groups IIA, IIB + H2, Class II, Division 1, 2, Groups E, F, G, Class III, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30 NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-1/8 IN Body Diameter X 3-5/16 IN Overall Length, 1-11/16 IN Turning Radius, 0.75 OZ Sealing Compound Requir

Category: Explosion-Proof Female Vertical Sealing Fittings

Service Entrance Head Threaded For Rigid Conduit Or Imc, Size: 4", Number Of Holes: (4/2)

Category: Service Entrance Caps - Metallic

Liquidtight Connector, 45°, 3/4 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Liquidtight Connector, 90°, 3", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT, RA

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Ground-Tite Type 4Q-L Grounding Liquid Tight Straight Connector With Lug, Size: 1 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA R

Category: Malleable Iron Liquidtight Flex Connectors

Liquidtight Grounding Connector, 90°, Insulated, Size: 1 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Conduit Hardware, Bushings, Insulating, Trade Size: 2 1/2 Inch, Material: Malleable Iron, Connection Type: Set-screw, Maximum Temperature Rating: 150° C,features: For Rigid And Imc, With Aluminum Lug, Outside Diameter: 3 3/8 Inch, Width: 7/8 Inch, Grounding Wire Size Minimum: 14 Awg

Category: Threadless Ground Bushings

OZ-Gedney Type UNF Conduit Union, Trade Size: 1/2 IN, 1-1/2 IN Outside Diameter, Length: 1-3/4 IN, Flexibility: RMC And IMC, Steel, Connection: Tapered FNPT, Third Party Certification: UL File Number E-34997 Listed For Class I, Division 1, 2, Grou

Category: Explosion-Proof Type UNF Unions

OZ-Gedney BS-S Series Domed Top Design Cover, 1/2 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL

Category: Steel Conduit Body Covers

Liquidtight Grounding Connector, 90°, Insulated, Size: 2-1/2 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Rigid/IMC Grounding Bushing, Type Threadless, Set Screw, Trade Size 5 Inch, Wire Size 14 to 2/0 AWG, Lug Type Lay In, Tin Plated Aluminum, Conductor Material Copper/Aluminum, Throat Type Insulated, Diameter 6-1/16 Inch, Height 1-1/4 Inch, Material Zinc Plated Malleable Iron Body, Zinc Plated Steel Set Screw, Zinc Plated Steel Clamping Screw, Approval UL 467, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard NEMA FB-1, Temperature Rating 150 Deg C

Category: Threadless Ground Bushings

2 IN 45 DEG CONN LFMC W/LUG

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Reducing Washer, 4" x 3-1/2", Steel

Category: Reducing Washers

OZ-Gedney Type T Conduit Body, Cover And Gasket Assembly, 1/2 IN Hub, Length: 5 IN, 1-3/8 IN Height, Conduit Body: Die-Cast, Copper-Free Aluminum, Cover: Type BS Aluminum, Gasket: Type SGN Neoprene, Finish: Aluminum Enamel, Connection: Tapered FNPT, 4.2 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type T Iron Conduit Bodies