"mst-200 a"

BUS BK/HHA ATC ADD-A-CIRCUIT;

Category: In-Line Fuse Holders

In-Line Low Profile Fuse Holder, 250 VAC, 20 A, 1 Pole, Quick-Connect, Rear Panel Hex Nut Mount

Category: Panel Mount Fuse Holders

30A 600V Midget 13/32" x 1-1/2" Optima Fuseholder, 45mm Width

Category: Class CC Finger Safe / Dead Front Fuse Holders

BUSS FUSEHOLDER, 0-30A, Loadside: Copper Crimp (1) #12-8/(2) #12, Lineside: RLC-A, Two-pole, HEX Series, Breakaway, Used with Class CC and 13/32" x 1 1/2" Fuses, 600V

Category: In-Line Fuse Holders

Mersen UltraSafe US14 and US22 modular fuseholders offer the highest levels of safety and features for IEC Cylindrical 14x51mm fuses and 22x58mm. Like all UltraSafe fuseholders, they qualify as "finger safe" to an IP20 grade of protection under IEC standards. These fuseholders come standard with a mechanical indicator that indicates fuse presence. If a fuse with a mechanical striker is used, the fuseholders mechanical indicator will also indicate a blown fuse. Microswitches can be supplied with the fuseholders if desired to allow for remote blown fuse indication. These fuseholders also feature padlocking capabilities. 750 Volts 50 Amps 3 pole with indicator series.

Category: Modular Fuse Holders

Fuse Holder Breakaway Double Pole Watertight Inline Feseholder

Category: In-Line Fuse Holders

BUS HHH-A BUS FUSEHOLDER S.D.

Category: In-Line Fuse Holders

BUS BK/HHJ-A BUS FUSEHOLDER S

Category: In-Line Fuse Holders

BUS HGC-A BUS FUSEHOLDER INDI

Category: In-Line Fuse Holders

BUS HHI-A BUS FUSEHOLDER S.D.

Category: In-Line Fuse Holders

Tron Non-Breakaway In-Line Water Resistant Fuse Holder, 600 VAC, 30 A, 12 To 8 AWG, 6 AWG Wire, 1 Pole

Category: In-Line Fuse Holders

BUS HGC-A-1K0752 BUS FUSEHOLD

Category: In-Line Fuse Holders

Mersen UltraSafe modular fuseholders introduce a new level of safety for class CC and midget fuses up to 30 amperes. UltraSafe fuseholders qualify as "finger safe" under IEC and DIN standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). UltraSafe fuseholders are available in 1, 2, 3 or 4 poles, with or without visual blown-fuse indicators in each pole. Multiple poles can be assembled in the field by ordering and installing pin-tie handles. UltraSafe fuseholders save up to 15 percent mounting space and any combination can be snapped onto 35mm DIN rail for extra savings in panel building time. Choose class CC fuses for Type "2" no-damage protection, one of the safest protection packages in the industry. The UltraSafe body material is tough and durable polyamide, with exceptional insulating properties. 1000 Volts 30 amps 3 poles standard indicator .

Category: Midget Finger Safe / Dead Front Fuse Holders

Fuse Holder UltraSafe™ 800VAC 1000VDC Midget 30A 1-Pole Pressure Plate IP65

Category: Midget Finger Safe / Dead Front Fuse Holders

Breakaway Leb Type Fuseholder With Permanently Installed Neutral

Category: In-Line Fuse Holders

Breakaway Single Pole Watertight Inline Fuseholder With Crimp Terminals

Category: In-Line Fuse Holders

FUSEHOLDER

Category: In-Line Fuse Holders

Fuse Holder Breakaway Double Pole Watertight Inline Feseholder

Category: In-Line Fuse Holders

1POLE INLINE FUSEHOLDER WITH CRIMP TERMI. The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application. Applications: Street, alley, and parking lot lighting. Security and perimeter lighting. Traffic signals. Outdoor illuminated signs. Sports lighting. Boat electrical circuits. Tractors and yard equipment. General outdoor circuit protection. Benefits: Safety-Permits individual fixture or device to be disconnected from circuit for servicing. Eliminates possibility of shock. Individual fixture fusing-Prevents loss of one fixture through accident, vandalism, or end of life from darkening the entire circuit. Simplifies maintenance- Being able to immediately identify the one faulted fixture eliminates testing the entire circuit, speeds repair and permits servicing the individual unit while the rest of the circuit is functioning. Reduces damage from fault-Can prevent faulted ballast or other failure from severely damaging fixture or device, reducing necessary repair or need of replacement. Features: Watertight-Internal O-ring provides watertight seal. Superior terminal seeds-Ultrasonically-welded terminals provide maximum strength and eliminate leaking at terminals. Break-Resistant- Fiberglass ûreinforced polymer body resists damage from dropping or impact much better than phenolic look-alikes. Flexible terminations-Accommodates a wide range of stranded or solid copper conductors, with either crimp or screw terminals. One-pole and two-pole models- available to accommodate all system voltages up to 600v.

Category: In-Line Fuse Holders

BUS BK/HTB-98M-R BUS FUSEHOLD

Category: In-Line Fuse Holders

BUS BK/HTB-58M-R BUS FUSEHOLD

Category: Panel Mount Fuse Holders

Eaton Bussmann series HEX inline fuse holder, Non-breakaway, Water-resistant, 0-30 A, 600 V, Loadside: copper setscrew (1) #12-3, Lineside: copper setscrew (2) #12-3 connection, Two-pole, Used with class CC and 13/32" x 1 1/2" Fuse

Category: In-Line Fuse Holders

Eaton Bussmann series HET inline neutral fuse holder, Single-pole, Lineside: Copper crimp (1) #12-8, Loadside: Copper crimp (1) #12-8

Category: In-Line Fuse Holders